What are the precautions for turning in narrow sections? What to do when the road surface is narrow

The narrow place is the most headache and the easiest point for everyone, and there is a relatively small parking space, when the parking space and the front passage are very narrow at the same time, in case it happens to hit a right-angle turn, or the slope of the underground parking lot of the shopping mall is a sharp passage.

The peculiarity of these places is that if you follow the habit of driving on the main road, it is easy to scratch two places of the car:

1. The middle position of the doors on both sides.

2. The upper right corner of the car.

Skills: For example, if you want to turn left, you should first hit the steering wheel on the right, so that the car can expand the radius of the arc in a small area, so that the main driver's door will never be scraped, so that because the trip is long, you can have enough distance to adjust the car, so that it is not easy to have a scratching accident.

Therefore, the above skills can be used in areas with a small range of activities, such as right-angle turns, sharp bends on steep slopes, out of narrow warehouses, and places where there is not enough U-turn on narrow roads.

The farthest distance in the world is not the distance between trees, but the branches that grow from the same root, but cannot cling to each other in the wind. The farthest distance in the world is not that the branches of the trees cannot cling to each other in the wind, but that the stars look at each other, but there is never a track of intersection.

Honk your turn signal. Then it is better to observe left and right. Be safe.

My cousin just bought a new car last month and didn't dare drive it a few times. The reason is that my cousin lives in an old neighborhood. As we all know, there is generally no underground garage in the old community, and there is no public parking space, and the vehicles are basically parked in the community at will, so every night, the empty field of the community is full of cars.

My cousin was originally a novice driver, and there were cars in the community. Once, my cousin was turning a corner when she accidentally bumped into a car next to her. Since then, my cousin has been too scared to drive around their neighborhood.

I believe that many novice drivers have encountered situations like their cousins. So, today's old driver who repairs cars will teach you a trick of turning on a narrow road.

Today I deliberately found an old community. You can see cars parked on both sides of the road from the side road to the main road. How can I pass safely?

If we want to turn left, then we should stay as far away from the white vehicle on the left as possible. At this time, try to get as close to the curb on the right as possible. How can I get as close to the curb as possible without hurting my tires?

1.First of all, you can look at the right rearview mirror to determine the distance between the body and the curb. Secondly, you can look at the rain spots.

When our wiper point overlaps the curb, the distance between our wheels and the curb is about 20-30cm. At this time, you can only hit a little to the right, not too much.

2.Second, keep driving the car forward. When the hood just covers the curb, take the time to kill the steering wheel and continue to drive forward. At this time, the left side of the body is very close to the white sedan. If the steering wheel is played early, it is likely to rub against the white car.

Of course, the right side of the vehicle is already very close to the curb. If the direction is delayed, the wheels are likely to rub against the curb. In fact, this narrow road turn is the same as the right-angle turn we learn in driving school. What we learn at the driving school must also be used flexibly.

Narrow corners are afraid of rubbing cars. As long as you keep these two points in mind, novices will be able to pass the test safely. Have you ever learned about the tight corners?

Millions of car purchase subsidies.

1. Prepare to turn right ahead. Due to the different narrowness of the road, it is best to try to get about 20 cm to the left in advance, and turn right to try to get as close to the left as possible, so as to avoid objects on the right side of the car as much as possible.

2. When the rearview mirror is basically aligned with the right corner, hit the right full direction. If the width of the road ahead allows, you can make a full right direction a little later, so that you can turn around.

3. The front wheel turns a large circle, and after the front of the car enters the corner, prevent the rear wheel from pressing to the right corner or shoulder when turning a small circle. If the road ahead is not wide enough, you can win a larger angle by turning the car as close to the side of the corner as possible by going back a few more times.

4. Continue to turn, observe the distance between the right side of the body and the obstacle in the corner of the corner of the inflection point in the right rearview mirror, and pay attention to the obstacle in front of the car when the front of the car draws an arc to the right.

5. Keep slow and give way to pedestrians when driving, and make sure that the front of the car and the right side of the body will not touch pedestrians and obstacles, and do not force a turn.

6. The left side of the front turns in the opposite direction.

Tips: 1. When entering a right angle. When the vehicle enters the test area, keep the right one-third of the front of the car to coincide with the sideline, which is exactly 30cm away from the sideline on the right wheel.

2. When turning. When the small triangular window pillar of the left front door of the car coincides with the right-angled protrusion, quickly hit the direction to the left.

3. When the corner is out. When aiming at the exit, quickly turn the steering wheel back to the right and continue to move forward, until the vehicle is completely out of the right angle, and the right angle turning and rolling leak are completed.

1. Reduce the speed of the vehicle. In the city, there are some roads where the roadside is full of vehicles and the lanes are narrow, so the first thing is to reduce the speed, because parking vehicles on the side of the road will lead to blind spots, and the vehicle can be adjusted in time when the speed slows down. If you want to judge whether you can pass, you must first judge the width of the road, if it is necessary, you can get out of the car to check the terrain, and consider the width of the rearview mirrors on both sides when entering the narrow road.

It is better to overtake less on narrow roads. The time required for a narrow road to cross from one lane to another lane will be shortened, and the reaction time left for the rear car will also be shortened, as long as the driver of one side of the vehicle does not concentrate on the fine destruction and force, scratching is easy to occur, so driving on the narrow road, if you are not particularly anxious, you must reduce overtaking, and it is best to drive in order.

2. When entering the narrow road, try to straighten the body as much as possible and drive smoothly. Going straight into a narrow road is the least difficult, but if you want to enter a narrow road diagonally, the width of the vehicle can be reduced instantly, and this is when the scraping is most likely to occur. Our drivers are on the left side of the vehicle, so they are more sure of the obstacles on the left than on the right, so when entering a narrow road diagonally, you might as well move the vehicle close to the left side, so that you can be a little more sure.

3. Narrow road meeting cars need to be prepared in advance. Many novice drivers are most afraid of driving, especially on narrow roads, although they have been thinking about not biasing towards the car, the steering wheel involuntarily deviates. In fact, there is no need to panic when meeting cars on narrow roads, first of all, we should pay attention to the situation of the incoming car, the model of the car, the load situation, the speed of the vehicle, etc., and at the same time observe the environment around the road, such as whether there are pedestrians approaching, the road ahead is wide and narrow, etc.

On the basis of observation, the driver can make a reasonable prediction, and set aside a suitable lateral safety interval for himself when meeting the car to deal with the occurrence of an emergency. As a driver, driving on a narrow road is not only to look at your own lane, but also to look far away, and you can't keep an eye on the incoming car of your friend, the most important thing is to slow down, prepare in advance, and if necessary, you can also stop and let the other party pass.

4. Turn out of the narrow road to ensure that the rear wheels pass through the obstacles safely. When driving out of a narrow road, we usually think that the front wheels can turn the steering wheel after passing the obstacle safely, but a lot of scraping increases occur in this case, because you only remember that the front wheels passed the obstacle but forgot the rear wheels, because of the blind spot formed by the inner wheel difference, when passing through the narrow road or isolation pier, the first thing to think of is that the rear wheels pass safely and then steer the operation.