-
Wireless shared charging cannot be recognized by the market because he has just invented it, so there are still very few people who know this, so it is not recognized by people. And it can be said that it is quite troublesome, and it takes time to lend it out and return it back.
Whether it's communication, payment, travel, or ordering, the importance of mobile phones has covered every corner of life. When wallets and card pockets are lost, mobile phones are increasingly inseparable. As a result, the number of public welfare facilities providing services for mobile phones has increased.
All kinds of public wifi, public charging piles, etc. appear in the city, but these public welfare convenient users also provide convenience for intruders.
Unlike shared bicycles, the popularity of shared rechargeable batteries is a bit slow, and even after the capital begins to mature, the development of enterprises is full of ups and downs, especially in shopping malls, there will always be various problems. On August 6, a reporter from Beijing Business Daily found that street electricity was gradually withdrawing from the mall during an investigation in the Beijing Aegean Shopping Park. A number of merchants said that the reason for the dismantling was that the person in charge of fire safety in the mall believed that there were potential safety hazards in the mall.
According to the report, in 2018, the scale of smartphone users in China reached 1.9 billion, and survey data shows that people's demand for external charges is 5%, that is, there are about 95 million urgent charge requests every day. For the shared power bank market,Compared with other electronic products, the brand effect is relatively smallThe appearance and practicality of the power bank is a topic of concern.
For the signing method of sharing toll treasure in shopping malls, the reply given by the tram is basically the same as **. Yuan Yuan, CEO of Jiedian, said that Jiedian signed a contract with the mall when it was placed in the mall, and signed a contract with the hotel when it was placed in the mall. Ren Mu also said that the contracts between different legal entities are independent.
-
McDonald's Future Smart Restaurant in Wangfujing, Beijing, has installed shared wireless charging equipment, and it is not difficult to see that the shared charging equipment is constantly updating and iterating.
The cost of wireless charging equipment is relatively high, and it is still a little inconvenient to play while charging the mobile phone, I remember that the hottest time for wireless charging should be a small ** in Douyin some time ago, I don't know if you still remember.
A beautiful girl's pink wireless charging pie, the moment she puts her phone on, she turns the light on, which can be said to be very cool.
Like shared power banks, the top players have already made a profit this year, and it will be difficult for you to squeeze in again.
With the advent of 5G, the demand for power from all parties such as fast charging is unimaginable, and there is no absolute leader in shared chargers, and they can also compete for flags in this extended market of shared charging.
So since there is a similar product with lower cost and faster return of funds, wireless shared charging cannot be recognized by the current market, which is also a very normal thing.
-
Because of sharing, it is easy for criminals to find her business opportunities and do bad things, so no one will use it.
-
Wireless shared charging is very troublesome and very difficult to manage.
-
I think it may be that its operability is not large, so it cannot be recognized by the market.
-
Because there are so many different effects of this thing, they will have different ways.
-
Maybe it's because this technology is still immature, so no one recognizes him.
-
Because this charging method still has many drawbacks, it needs to be further developed.
-
Because it is not easy to manage, and the operation is not so simple, it cannot be recognized.
-
Because there is no reasonable rule and way to proceed.
-
Because this charging ability is a bit of a chicken rib, there is no good application.
-
I think it's mainly because wireless shared charging is very unsafe, so it's not recognized by the market.
-
The differences between shared charging and wireless charging are as follows:
The convenience of wireless charging applications is different from the innovation of other components, and its convenience depends on the popularization of charging end networks. As wireless charging technology becomes more and more mature, more and more brands such as Apple, Samsung, and Huawei are introducing wireless charging into their products. The formation of charging terminal networks has accelerated the pace of deploying wireless charging transmitters in public places such as hotels, coffee shops, and restaurants.
Compared with the shared charging treasure, the shared wireless charging does not have the problem of returning, and the shared wireless charging is more inclined to the ecological environment construction of wireless charging. Wireless charging will become a public service similar to wifi in the future, and the convenience of wireless charging will be fully reflected, and it will also become one of the killer features of various businesses to attract consumers.
Shared wireless charging advantages:
One: worry-free, shared wireless charging is not like the traditional shared charging treasure needs to be borrowed and returned, the charging cost is cheaper than the shared charging treasure, about 2 yuan an hour, and the charging speed is the same as the charger output 5V1A.
Two: labor-saving, just WeChat scan code desktop prompt area***, you can charge wirelessly, if the phone does not support wireless charging, you can also charge wired. The product comes with a USP interface, and the data cable is reboundable, which can be pulled out when it needs to be charged, and unplugged after flushing, and automatically rebounded.
The products are designed according to the different needs of customers.
Sanchen this: not afraid of shutting down, although there are many forms of shared charging friends, but the mobile phone is required to make a fast and good Mingjie payment. However, if the phone is out of battery and the phone is turned off, these methods are obviously not feasible.
However, shared wireless charging can be charged even when the phone is turned off, and the first five minutes are free. This function can be regarded as the "gospel" for those who go out and turn off the mobile phone when it is out of power.
Four: powerful, users can receive merchant details while charging, realize desktop ordering, eliminate cumbersome ordering process, and directly place the merchant details page on the mobile phone screen to order directly. **Payment, no waiting for post-meal settlement, independent completion of the mobile phone, support a variety of channels:
Interactive advertising, news feeds, etc.
-
There are several reasons why wireless charging technology has not been widely popularized
1. The number of terminals is less than that of the state.
The two-year-old Nokia Lumia 920 had built-in Qi wireless charging technology and was equipped with a wireless charging pad, but no other manufacturer followed suit. Although some third-party manufacturers have also launched wireless charging accessories, they need to install a special case, which is not compatible with other digital devices, and it is inconvenient to use it.
2. The standards are not uniform.
At present, the main wireless charging standards in the consumer field include the three major standards of the Wireless Power Consortium: QI, 4AWP, and PMA. In terms of market size, Qi is undoubtedly the most popular at present, and Qi's latest standard can achieve wireless charging distances from 7 to 45 mm, which is a small breakthrough.
A4WP's wireless charging technology, called "Rezence", uses resonant coupling technology, and although it has occasionally appeared at some consumer electronics exhibitions, it has not yet been officially commercialized. Although PMA's products can be found in the market, there are few of them, and the biggest commercial activity is Starbucks support, which has launched free wireless charging services in some stores in the United States, but the response has been mediocre.
3. Accurate short-distance inductive coupling.
At present, the wireless charging technology supported by some smartphones and most electric toothbrushes uses inductive coupling technology. A coil is integrated on the back of the phone, the bottom of the toothbrush, and the charging base to generate a magnetic field, and the interaction of the two coils transmits current to enable wireless charging.
One of the major drawbacks of this technology is that the transmission distance is short, so many mobile phones that support wireless charging need to be placed on the wireless charging base more accurately in order to charge normally.
4. Remote inductive coupling technology is expensive.
Electrical coupling is a good idea, but the distance problem needs to be addressed. A promising study is to solve the distance problem by using an extensible material that places the coils in the same range of resonant frequencies.
At present, the Massachusetts Institute of Technology has increased the effective distance of wireless charging to about two meters through resonant sensing technology, the technology is named "witricity", one of the researchers has since left to start a business, developed a system, but the price is more expensive, reaching 995 US dollars (about 6240 yuan).
vivo phone can't flash charge, you can solve it as follows: >>>More
1. If the Apple 6 mobile phone is the Hong Kong version, it can't be turned off and charged; This is the setting of the iOS system, when it detects that the battery level of the mobile phone exceeds 5%, it will automatically turn on. >>>More
You go to the merchant, it's a problem with the machine itself.
That's because the transfer market was shut down and maintained by the EA server, and there are two possibilities for the specific opening time; >>>More
A computer: path C: Windows System32 Spool Printers, empty the contents inside. >>>More