-
Depending on what you said, the most likely thing is that the wireless router has the biggest problem with performance and compatibility. With the attitude of giving it a try, you can do the following:
1.From the new initialization of the wireless router to the exit state, there is this item in the configuration interface, or there is a reset button on the back of the router.
2.Manually change the band, change the password mode, and try these two changes.
3.After the WAN port cable of the wireless router is connected, look at the WAN port status in the running state, and try whether your iPad can go to the Internet wirelessly if there is a value in the WAN port in the state (provided that your iPad can be wirelessly connected to the Internet elsewhere).
Beijing Hongtian Computer: Professional door-to-door installation of wireless routers: 010-5166-0335
-
Don't know how you connected in the first place?
Depending on what you mean, it turns out that your wired and wireless routers are side by side, both are directly connected to telecom broadband.
But now wired can be used, but wireless can not be used.
It is possible that the original telecom did not restrict your IP, but now it is restricted, and only one IP can go out for a household.
Therefore, wired or wireless connection to the external network can work normally, and cascade can also work normally, but it cannot work in parallel at the same time.
iPad can't go to the wireless network, it is recommended that you look at the settings of the wireless router, whether the IP is restricted, whether the password is correct, etc., and restart the iPad to try.
-
Normally, you can use the wireless network after the wireless router is set, but you need to add a line to connect to the wireless to access the Internet, it must be a setting problem, a wired router to connect to the wireless router tutorial, it should be able to solve, as for the iPad can not go online, it may be because the IP and DNS are not set! Set it up and see if it works!
-
iPad refresh the router lease and try it.
-
There are three ways to access the Internet, dial-up Internet access, dynamic IP Internet access, and static IP Internet access.
1. Broadband dial-up Internet access, some routers are called: ADSL dial-up, PPPOE dial-up, etc., all of which mean the same thing, that is, you must enter the Internet account and password to access the Internet. Generally speaking, when handling and opening broadband services, operators provide you with:
Broadband account, broadband password, and you need to use the "broadband connection" program to connect, after the connection is successful, the computer can access the Internet normally, in the router settings, select the "broadband dial-up Internet" this way of surfing the Internet.
2. Automatically obtain an IP address to surf the Internet, which is also called dynamic IP Internet access, DHCP Internet access, automatic acquisition, etc. If you connect the network cable from the cat, or the network cable that the operator pulls to your home, plugs it into the computer, and you can directly access the Internet without other operations, it belongs to the Internet access method of "automatically obtaining an IP address".
When setting the router's Internet access mode, you should select the Internet access method of "Automatically obtain IP address".
3. Fixed IP address Internet access, some routers are called: static IP address Internet access. When handling broadband services, the carrier will provide you with a fixed IP address, subnet mask, default gateway, preferred DNS, and alternate DNS server address.
When the router is not used, you need to fill in the fixed IP address, subnet mask, default gateway, preferred DNS, and alternate DNS information provided by the operator in the local connection of the computer, and then the computer can access the Internet, which is the Internet access method of "fixed IP address Internet access".
"Fixed IP address Internet access" is generally used in the private line broadband service of enterprise units, and at present, the vast majority of broadband services handled by home users are automatically obtained from IP address Internet access. The second is broadband dial-up Internet access.
-
If there is a problem with the wireless connection, there is a network, but it does not work. It is recommended to turn off the router and restart it every three minutes to reconnect the phone.
-
1.The desktop and the computer are connected, at least you can see that the ping is corresponding, whether the response value is less than 1ms, if it proves to be very smooth, if it is greater than 1ms, it means that the network cable connecting the desktop to the computer is problematic, I have encountered it, it can be connected to the router, but it can't go online, and it turns out that 3 of the 8 wires are broken, which affects the signal.
2.The laptop can be connected to the router and can access the Internet, which means that the basic settings of the router are no problem, and the dial-up settings of Tietong are very simple, and they are not encrypted, so you should have no problem at all.
3.Tietong generally does not have MAC address authentication, there is no restriction on the router to access the Internet, at least the MAC address of the notebook and the router are not the same but can be accessed.
4.As soon as the wired network is connected, the router can't dial in. There's only one possibility.,Change a router to test.,But I really haven't encountered this problem with the router.,Wireless connection can go online.,Wired can't be on.。
-
...However, after pulling off the cable connected to the desktop computer, it is normal to configure it wirelessly through the laptop.
Wireless or wired?
Change the MAC address of your router to which machine you can dial up to access the Internet.
-
You can find the status in the settings page to see if the router is dialed up and whether it has been assigned an external IP. Is it set to manual dialing? Originally, this kind of home router is a very low-end thing, and it is even more difficult.
Error 651 means "Your modem (or other connected device) has reported an error. "There are two main reasons for the problem of error **651: >>>More
1. Before connecting the modem to the router, you must set up the router. >>>More
Take a look at the router's manual, which has instructions. >>>More
There is no doubt that the problem should be approached in this way: >>>More
If the settings are incorrect, connect the computer network card with the LAN port of the router with a network cable, and turn on the power of the router; Double-click the IE browser on the computer, enter the IP address of the router default settings page in the address bar, and press Enter; Enter the default username: admin, and the default password: >>>More