Broadband connection and router issues? Problems with broadband vs. wireless routers.

Take a look at the router's manual, which has instructions.

If the IP of your router is.

Specific steps:

2.Access via browser:

3.After logging in (the password is the password of the router, the default is admin) check the network settings on the left (find the specific name by yourself), there is a place that requires the setting of ADSL information, fill in and set it to automatic dialing.

4.View. The DNS information displayed on the homepage.

5.Go back to the first step and fill in the DNS information under the gateway address. OK is complete.

In the future, when you go online, as long as the router is on, you don't have to do anything else.

In this case, it may be that the Broadband My World software has encrypted the password.

What you enter is not the same as the actual PPPoE, or the password is encrypted by software.

It's best to ask if there are other people in the network you use to access the Internet directly with PPPoE? Are there rules for passwords?

Open IE, enter the username, admin password, admin routing settings, enter the username and password, and the connection mode (PPPoE) is complete.

IP is set to dynamic

Set your computer to automatically acquire IP as well

Your password may have been mistyped (note that there are no capitalization errors).

It is recommended that you call the service center and tell him your mistake, and he will tell you the corresponding solution.

Wow, there are so many questions, one by one.

1. Broadband is broadband, and optical fiber is optical fiber, which is different. The difference is that the bearings are different. It's not directly related to speed.

2. Special line, do you use a cat to connect directly to your computer? Or is it a direct network cable to the home? As the name suggests, a dedicated line.

The broadband speed above M can meet the needs of general users, but it also depends on the use of several computers at the same time. The brand of routers below 100 yuan is very miscellaneous, depending on your needs and working environment, if there are more rooms and you need to wear a few walls, you need a router with more power, so as not to affect the transmission rate. If you look at the price alone, the relative power of ** high is also larger.

4. It is recommended that if multiple people use it, try to choose a router of a big brand, TP-Link is relatively stable, and Mercury has a few routers that are also good. Mercury's routers are comparatively cheaper.

1.Optical fiber is a type of cable, which is a type of broadband medium. It has nothing to do with internet speed.

My own definition is just to distinguish the difference in speed. It doesn't make any sense.

3.There is a difference. The high-end ones are more stable. With a bandwidth of 10 Mbit/s, you can find a route of more than 150Mbit/s.

That's it.

(1) If it is your own wifi network, do not use the wifi router, the computer is directly connected to the cat or the main network line to go online, if the network is still slow, it means that the quality of the broadband line itself is not good, it is recommended to repair the broadband operator's customer service for maintenance.

2) The computer is directly connected to the cat or the main network line is normal, the faster way is to reset the wifi router to the factory settings, only do the minimum configuration, that is, only configure the broadband account, broadband password, wifi name, wifi password and other basic parameters, and the others are in accordance with the default settings. If there is still a problem with the network, then there is a problem with the router.

Usually you have to dial up every time you surf the Internet. Now with a router, your dial-up work can be done through the router. The first time you need to enter it in your browser is to enter the router's management page.

The password is on the sticker of your router, and after entering, fill in the password of your broadband dial-up account. Once saved, your router will be able to automatically dial up. The specific router management page is set up differently because each router has its own differences.

So you can understand it by looking at your manual. Hope it works for you.

**Wire to the cat, cat to the router.

Internet access must pick up cats.

adsl at the upper level,Connect your ** line,ADSL out of the network cable to connect your router WAN port,You also have to set the parameters of the wireless router,No,You station me,I'll teach you step by step。

That's the case,If the router has the function of ADSL, you don't need to install an ADSL,If not, you have to install it,Like I am two integrated together,As for the ADSL connection you said, it doesn't refer to the dial-up software on the computer,That's not needed,After the line is connected,You can use wireless Internet access under the router settings。

Put the wireless router between the computer and the broadband.

Is the DHCP function turned on on the router?

No open on the front tick on it.

You can get a LAN management software from the web like P2Pover