Why is the Haiqin mechanical watch slow?

Common reasons why a mechanical watch slows down:

1. Insufficient kinetic energy: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop.

Mechanical watches that are wound by hand can solve the problem by winding, while watches that are self-winding are mostly due to insufficient wearing time (less than 8-10 hours a day) or people who exercise a little bit. Friends in the general office or the elderly often have a mechanical watch with insufficient power, causing the watch to slow down.

2. Impact: No matter what brand of watch, it cannot be hit hard, even if some watches have good shockproof performance. When playing golf, tennis, boxing and other sports, you should also take off your watch and not shake it vigorously; When the watch is impacted, some parts inside may loosen, causing the watch to slow down or not walk.

Due to the complex structure of mechanical watches and the close connection between their parts, they are more likely to fail when they are impacted.

3. Lack of maintenance: mechanical watches need to be maintained regularly, generally every 2-3 years or so. If you don't maintain your watch regularly, too much sludge will accumulate in the watch movement and dry out, which will slowly increase the friction between the wheel trains.

In case of these faults of the stepper motor and wheel train, they should be cleaned, removed from foreign matter, and refueled. Some parts of the movement are damaged and need to be replaced. Lack of maintenance of the watch will not only accelerate the wear and tear of the parts, but also cause the watch to slow down, which will cause inconvenience to use.

4. Gear train failure: The occurrence of this situation is mostly related to the watch maintenance mentioned in the third point. Most of them are dusty and foreign objects between the gear teeth, which make the gear train teeth stuck with each other.

There are also some tables where the amount of oil is too much or very little, and the amount of oil is too much to cause adhesion between the wheels and between the wheels and the splint. Too little oil makes the wheel train too resistant, which will make the watch go badly. In case of these faults of the stepper motor and wheel train, they should be cleaned, removed from foreign matter, and refueled.

5. Watch magnetization: Watch magnetization is one of the common reasons for watches to slow down, even if it is an anti-magnetic watch, even an anti-magnetic watch can not be placed next to some electrical appliances, because some of his parts are not anti-magnetic, and they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

Guidance and suggestion: the mechanical watch time is not accurate, you can take it to the maintenance center to find professionals to adjust, try to choose a regular and experienced maintenance point for calibration.

1. Both mechanical watches and quartz watches are available, but sometimes the watch slows down, for quartz watches, the energy of the watch is the battery, if the battery is insufficient, it may lead to the phenomenon of slowing down or stopping, but for mechanical watches, it is not so simple.

2. For automatic mechanical watches, if you wear them normally for 8 hours a day, the normal amount of exercise can support the time, generally speaking, the watch can walk normally for 36 hours, if you don't wear it often, the duration of the goods is not long, that is the reason for the lack of energy, if there is enough energy every day to support the rotation of the watch and there is a big deviation, you need to go to a special institution to check what the situation is.

3. Generally, the watch is close to the magnetic field, if your watch is getting slower and slower within a year of buying it, it may be that the watch is in contact with magnetic items, you can go to the maintenance center to demagnetize, and then please avoid the contact between the watch and the magnetic items.

If you wear it for a long time, it may be that the oil in the watch movement is dry, the rotational friction resistance of each part becomes larger, and the watch will slow down, and you have to oil the movement, otherwise it will cause the parts to be worn out for a long time.

When you encounter the situation that the watch suddenly goes fast, there is no need to worry, and you can go to a professional watch maintenance agency for maintenance in time.

Chengdu after-sales service center is located in Room 05, 24th Floor, Sichuan Airlines Plaza.

Summary. Hello dear, the reasons why mechanical watches are getting slower and slower: 1. Lack of power Generally, automatic watches should be worn on the hand for more than 8 hours a day to make up for the amount of clockwork.

2. The movement is dirty, poorly lubricated, and too much sludge The watch is used for a long time or the shell is poorly sealed, which causes the inside of the movement to be stained and lubricated, which causes the watch to go slower and slower. Therefore, most watches can be restored to normal time after maintenance. 3. If the weather is cold and slow, the solution is very simple due to the solidification of lubricating oil affected by temperature, which is to clean all the lubricating oil and replace it with non-coagulating oil.

4. When the watch is knocked and fallen, it is likely to cause the loosening of the internal parts, the phenomenon of stealing and even stopping. In addition, the tenon of the pendulum shaft is slightly bent, and the rotating movement, balance, pallet fork and gear train can be rotated, but the balance wheel stops after a short time.

Hello dear, the reasons why mechanical watches are getting slower and slower: 1. Lack of power Generally, automatic watches should be worn on the hand for more than 8 hours a day to make up for the amount of clockwork. 2. The movement is dirty, poorly lubricated, and too much sludge The watch is used for a long time or the shell is poorly sealed, which causes the inside of the movement to be stained and lubricated, which causes the watch to go slower and slower.

Therefore, most watches can be restored to normal time after maintenance. 3. If the weather is cold and slow, the solution is very simple due to the solidification of lubricating oil affected by temperature, which is to clean all the lubricating oil and replace it with non-coagulating oil. 4. When the watch is knocked and fallen, it is likely to cause the loosening of the internal parts, the phenomenon of stealing and even stopping.

In addition, the tenon of the pendulum shaft is slightly bent, and the rotating movement, balance, pallet fork and gear train can be rotated, but the balance wheel stops after a short time.

The reason why a mechanical watch slows down may be that the amount of activity is not enough, the kinetic energy is insufficient, and the watch is magnetized. To solve the problem of insufficient kinetic energy, you only need to wear it normally for about 8 hours a day, and you need an appropriate amount of exercise kinetic energy to support the time. If it is magnetized, prepare a compass, put the compass flat on the table, hold the watch at close range and quickly shake it back and forth above the compass, and then convert the watch to multiple directions to try to change, the pointer is slightly rotated or turned sharply, it means that the watch is magnetized, it is recommended to go to the watch shop for maintenance.

The reasons why a mechanical watch is slow are:

1. Insufficient power, mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and it can be directly manually wound to supplement the power.

2. There is no maintenance, the mechanical watch is generally 2 to the 3 years or so to protect the world once, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of the gears for a long time will produce iron filings, increase the friction between the gears, this problem as long as the movement is cleaned, re-refueling.

3. Impact, the structure of the mechanical watch is complex, it is composed of hundreds of precision parts, it is very fragile, the watch is hit by a strong impact, and the parts in the movement may loosen, causing the watch to slow down or stop the watch. According to the reason for the slow movement of the watch, take corresponding measures to defeat the old, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

Summary. The main reasons why mechanical watches are getting slower and slower are: first, the amount of activity is not enough, and second, the kinetic energy is insufficient; Third, the watch is magnetized; Fourth, the oil sludge of the movement is dry.

Automatic watches need to be worn normally for about 8 hours a day, and need normal and appropriate exercise kinetic energy to support the time, and wearing 8 hours a day can support 36 hours of time. Generally, the watch is close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, and magnetic objects (such as magnets, mobile phones) will cause magnetism, which will affect the watch to run fast or inaccurately or temporarily stop. If the oil in the watch movement is dry, it will increase the frictional resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.

The main reasons why mechanical watches are getting slower and slower are: first, the amount of activity is not enough, and second, the kinetic energy is insufficient; Third, the watch is magnetized; Fourth, the oil sludge of the movement is dry. Automatic watches need to be worn normally for about 8 hours a day, and need normal and appropriate exercise kinetic energy to support the time, and wearing 8 hours a day can support 36 hours of time.

Generally, the watch is close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, and magnetic objects (such as magnets, mobile phones) will cause magnetism, which will affect the watch to run fast or inaccurately or temporarily stop. If the oil in the watch movement is dry, it will increase the frictional resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.

It is recommended to wear the automatic watch for more than 8 hours a day, and if the amount of exercise is insufficient, the watch is manually wound for 20-30 times each time. If you find that the watch is magnetized or the oil in the watch movement is dry, you should go to a special after-sales maintenance organization and find a professional watch repairer to deal with it. Do not dispose of it yourself to avoid damage to the watch.

1.Why are mechanical watches moving slower and slower?

A mechanical watch, as an ancient timekeeping tool, has many delicate parts in its mechanical structure. Over time, these parts are likely to cause the watch to move more and more slowly. So, why do mechanical watches have this problem?

2.Effect caused by friction.

The moving parts of a mechanical watch, such as mainsprings, gears, etc., can cause friction due to long-term wear and tear, which in turn can lead to inaccurate timekeeping. Although the components of mechanical watches are made of high-quality metal materials, friction will still affect the accuracy of mechanical watches after long-term use.

3.The effects of temperature and humidity.

There are a wide variety of metal parts inside a mechanical watch, and the metal is quite sensitive to temperature and humidity. If the temperature and humidity of the mechanical watch are used in a large range, it may lead to problems such as expansion and contraction changes and oxidation corrosion of the metal parts inside the watch, which may lead to the inaccuracy of the watch.

4.surface grease and other factors.

Wearing a mechanical watch for a long time may cause surface grease, dust and other pollutants to be deposited on the parts of the mechanical watch, which may affect the normal operation of the mechanical watch. For example, a small amount of grease contamination is enough to cause difficult contact or even stagnation of mechanical watch components. All of these effects will cause mechanical watches to move more and more slowly.

5.How to solve the problem that mechanical watches are getting slower and slower.

To solve the problem that mechanical watches are getting slower and slower, we first need to achieve timely and meticulous maintenance. For example, keeping a mechanical watch dry, avoiding shocks, reducing prolonged vibrations, etc., can all help improve the longevity and timekeeping accuracy of a mechanical watch. In addition, Hunger Feast mechanical watches often need to be cleaned to remove contaminants such as grease and dust from the surface to ensure good contact between the mechanical watch parts.

6.Comparison of mechanical watches with modern timekeeping tools.

Although mechanical watches have certain problems in timekeeping accuracy, their classic design and exquisite craftsmanship are still loved by many consumers to a certain extent. In contrast, modern timekeeping tools, such as quartz watches, are more precise and can achieve millisecond accuracy. However, modern timekeeping tools lack the cultural history, collection value and other characteristics of mechanical watches, so they will still be ignored by many mechanical watch enthusiasts.

7.Conclusion.

In general, mechanical watches are moving slower and slower because of factors such as friction, late temperature periods, humidity and contaminants in their design. The accuracy of a mechanical watch can be improved by regular maintenance and cleaning, as well as by avoiding shocks. Although modern timekeeping tools are more accurate in terms of timekeeping accuracy, mechanical watches, as a representative of cultural history, are still loved by many collectors.

1.Lack of power, mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and can be directly manually wound to supplement power.

2.There is no maintenance, mechanical watches are generally maintained once every 4 to 5 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear will produce iron filings for a long time, increasing the friction between the gears, this kind of problem only needs to clean the movement and re-refuel.

3.Impacted, the mechanical watch has a complex structure, is composed of hundreds of precision parts, very fragile, the watch is subjected to a strong impact, the parts in the movement may loosen, causing the watch to slow down or disassemble the watch. According to the reason why the watch is slow, you can take corresponding measures to dress up socks, pay attention to the winding of manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.