Where are the TUDOR Watch Service Centers?

What to do if the watch gets water.

It is normal for the watch to get water, if the water is not serious, but there is a layer of fog in the watch glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it for about 30 minutes at a distance of 15 cm from a 40-watt light bulb to eliminate water vapor. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours.

Of course, there are also some daily repair methods for watches to get into the water:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe.

The solution to the water in the watch and the fog on the mirror:

Wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the light bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the light bulb or bake it directly, so as not to cause the surface to be deformed by heating.

Wear the surface inwards and the bottom case outwards on your wrist to remove the mist from the surface after a few hours.

If you have silicone, you can put the silicone and the watch in water into a closed container, and after a few hours, take the watch out again, and the water mist in the watch will disappear.

If the water ingress of the watch is serious, it is best to send it to a watch shop to wipe the oil and eliminate the water in the watch to avoid rust on the parts of the watch.

Note: In order to prolong the service life of the watch, you should try to avoid fog and water droplets in the waterproof watch, do not wear the watch when washing your face, bathing, swimming and other "hydrophilic" activities, do not be affected by water vapor and hot vapor, and pay more attention not to be exposed to rain on rainy days.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby. For more information about watch repair questions and related information, you can click **Consultation or Dial** for consultation to provide you with professional watch repair services.

Water and fog into the watch has the greatest impact on the watch movement, and it should be dealt with in time to prolong the service life of the watch. If not treated in time, the residual moisture will easily cause the internal movement to oxidize and rust, which will lead to inaccurate watch timekeeping and watch failure. Try to prevent the watch from entering the fog, remember not to wear the watch when washing clothes, washing your face, and taking a bath in your daily life, and pay attention not to let the watch come into contact with a lot of water when washing your hands.

If the watch is seriously flooded, please send it to the repair center immediately for treatment, otherwise many metal parts inside the movement will oxidize and rust due to water vapor, causing more serious damage.

It is recommended that you go to the designated repair shop for repair, especially during the maintenance period, which is generally 2 years of maintenance, and the maintenance period is free of charge. Therefore, you must go to a regular maintenance and after-sales service to use it.

1. Put the mask on the wrist and the moisture can be eliminated after two hours. If the water ingress is severe, you can send our regular organization to wipe the oil to remove the moisture from the movement to avoid rust on the parts.

2. Tips: Even if it is a waterproof watch, you should avoid soaking the watch in water, and as long as the watch has been blistered (unless it is a diving watch), it is best to enter the site to check it, so as not to cause serious damage to the internal movement parts due to time delays. In fact, the degree of waterproofing of a waterproof watch will change as the waterproof ring hardens, so it is necessary to replace the waterproof ring in a timely manner.

Method 1: Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear. This method does not damage the timekeeping and components of the watch;

Method 2: Lamp baking method: Wrap the watch in water with a paper towel, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes. Never roast over fire;

Method 3: Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

The Tudor Maintenance Center is located in Room 2606, Block B, China Resources Building, Vientiane City, No. 1366 Qianjiang Road, Jianggan District, Hangzhou.

1.If there is only fog in the glass, you can wrap the table tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate moisture.

2.Do not bake the watch directly near the heat, so as not to deform the watch by heating.

3.You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the water vapor can be eliminated after two hours.

4.If the water ingress is serious, it should be sent to the watch shop immediately to wipe the oil to remove the moisture from the movement.

The after-sales center of TUDOR watches is in: Room 808, Block E1, Office Building, Oriental Plaza, No. 1 East Chang'an Street, Dongcheng District, Beijing, when your watch fails, you should go to the regular after-sales center, and a professional technician will conduct a comprehensive maintenance and inspection to extend the service life of the watch.

What should I do if my watch gets water?

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

Some TUDOR watch after-sales service points: headquarters after-sales maintenance center, Beijing TUDOR service center, Shanghai TUDOR service center, Guangzhou TUDOR service center, Hangzhou TUDOR service center.

1. Headquarters after-sales maintenance center

To: Brother of the Headquarters Maintenance Center.

2. Beijing Tudor Service Center

3. Shanghai Tudor Service Center

4. Guangzhou Tudor Service Center

5. Hangzhou Tudor Service Center

Some of its products:

1. Rose series

The TUDOR Rose collection is a celebration of femininity. As its name suggests, it draws inspiration from a dreamlike world and the mesmerizing moonlit evening sky, leading us into a world of refined elegance and unique creativity. The small seconds in the shape of a skeleton TUDOR rose add to the intoxicating charm of the watch.

2. Tudor Style series

The Tudor Style collection is a contemporary interpretation of classic models, drawing inspiration from classic Italian scooters and their romantic drives, as well as the aesthetic elements of legendary models that went down in history from the 1950s to the 1970s.

The watch is designed in a retro and fashionable style, and is available in stainless steel or **steel, which is suitable for any occasion. The details of the watch are meticulously decorated to ensure a comfortable fit and elegance.

The above content reference: TUDOR watch repair center point query.

Tudor watch repair points include Beijing Tudor After-sales Service Center (Guomao Store), Beijing Tudor After-sales Service Center (Wangfujing Store), Beijing Tudor After-sales Service Center (Xihuan Store), Shanghai Tudor After-sales Service Center (Ganghui Store), Shanghai Tudor After-sales Service Center (Hongyi Store).

1. Beijing Tudor after-sales service center (international trade store).

Service**: 400-061-9500.

2. Beijing Tudor after-sales service center (Wangfujing store).

Service**: 400-061-9500.

3. Beijing Tudor after-sales service center (Xihuan store).

Service**: 400-061-9500.

4. Shanghai Tudor after-sales service center (Ganghui store).

Service**: 400-655-5071.

5. Shanghai Tudor after-sales service center (Hongyi store).

Service**: 400-655-5071.

The TUDOR after-sales service points are as follows:

1. Shanghai Hengdali Watch (Super Brand Mall Store), the address is on the first floor of Super Brand Mall, No. 168 Lujiazui West Road, Shanghai. The operating brands include Certina, Hamilton, Ball, TAG Heuer, Oris, Casio, Raymond Weil, Mido, Baume & Mercier, Emperor, Audemars Piguet, and Tudor.

2. Rolex Beijing ****, the address is 8th Floor, Dongxin Tiandi East 1 Office Building, No. 1 East Chang'an Street, Dongcheng District, Beijing.

3. Rolex Guangzhou ****, the address is on the 1st floor of the new innovation building at 123 Tiyu West Road, Guangzhou.

4. Shenzhen Hengjili Watch Center (MixC Store), located on the first floor of China Resources Mixc City, No. 1881 Bao'an South Road, Luohu District, Shenzhen. The operating brands include Carl F. Bucherer, Tudor, Raymond WEIL, Blancpain, Breguet, Le Méridien, Girard-Perregaux, Oris Pup, Longines and Mido.

5. Hong Kong Sample Watch & Jewelry (Wheelock), located at Shop C, Wheelock Building, 20 Pedder Street, Central, Hong Kong, operating brands such as Tudor, Omega, Panerai, Zenith, Breguet, Kunlun, and Hublot.

6. Yinchuan Weiyas Famous Watch Store (Xinhua ** store), the address is at No. 8, Xinhua Zhan Tannai**, Yuhuangge South Street, Yinchuan City, and the operating brands are Tissot, Tudor, Oris, Longines, Mido, Citizen, Omega Waiter, Rolex, Tag Heuer, Plum Blossom, Jaeger-LeCoultre, Emcroix, Oriental Double Lions, Casio.

Shanghai Hengdali Watch (Super Brand Plaza store); Shanghai Hengdali Watch (No. 372 Nanjing East Road); Rolex Shanghai****.

The TUDOR watch repair point will be repaired according to the specific after-sales content of the brand, if the watch fault is within the after-sales range, and we do not have the time after the **, it can be repaired for free.

But if there is serious damage to the watch, and there is a human factor, then there will definitely be a certain repair cost. It depends on what kind of problem occurs in the watch, the Tudor watch maintenance point will be carried out according to the ** of the repair watch, and the fault can only be determined after disassembly and maintenance, and the maintenance cost should be considered.

Brand history: The Prince and Princess collections are evergreens in the TUDOR family. Some veteran collectors know that even in.

The "Prince" and "Princess" produced in the 60s and 70s can also compete with the top brands, which shows the importance of these two collections.

The watches in both collections insisted on a mechanical automatic movement, and deliberately maintained the form and style that was so popular that it felt timeless. The chronographs in this collection give a new look to the Prince collection. The first-generation Prince Chronograph was not as good as the best in every way, but its supple straps, the design of the surface and the bold use of colour made a deep impression.

Dineng has a professional maintenance team in China, providing maintenance services nearby to provide protection, and there are maintenance centers all over the country.

The original TUDOR logo also featured the rose motif that symbolized the war. Later, this symbol became a shield with roses painted on it, and then evolved into its current appearance, i.e., the shape of a single shield. TUDOR has long been the epitome of modern and durable Swiss watchmaking that has long been the epitome of an active lifestyle in the modern era.

The brand's spokespersons, David Beckham and Jay Chou, both wore this watch on their wrists for the first time, and it does have too many reasons to be coveted.

The design of the watch

In 2020, TUDOR reinvented the brand's "Royal" concept with the launch of the new Royal Collection, allowing fans of the brand to once again enjoy the exceptional quality that has been present in the brand's creations for more than half a century. The delicate and rational design and outstanding quality of the movement make TUDOR's Royal Collection another "hot model" in the Swiss watchmaking industry this year.

A distinctive feature of the TUDOR Royal collection is the fluted bezel, which is a versatile watch that can be worn for any occasion with two different finishes, cut and polished.