How to look in the rearview mirror when reversing? How do you look in the rearview mirror when rever

The old iron who learned to remember to double-click to follow.

1. When reversing, the rearview mirror on this side can be lowered by 15 degrees to facilitate the observation of the ground situation at the rear of the vehicle.

2. The rearview mirror on the driver's side is a flat mirror, reflecting a relatively small field of vision but also a more realistic sense of distance. Usually, the scene in the mirror will be smaller than when you look at it directly, and judging by the position relationship and the change of position (distance) is a trick to look in the mirror. For example, when driving, if the distance between the rear cars in the mirror quickly decreases and the oncoming cars behind quickly "become larger", it means that the rear cars are already very close to you.

3. Before reversing, first see the situation behind the car, estimate the route of reversing, determine whether the front of the car will touch obstacles, try not to step on the accelerator when reversing, and control the speed not too fast.

4. According to the needs of the rear direction of travel, turn the steering wheel with the left hand: if the rear of the car needs to travel to the right rear, turn the steering wheel to the right; Otherwise, turn the steering wheel to the left.

5. Don't keep looking at the back of the car during the reversing process, on the premise of confirming the safety behind the car, you need to observe the left and right rearview mirrors from time to time, pay attention to the distance between the obstacle and the body, and use the steering wheel to correct the position of the body when it is retreating.

6. Adjust the left side mirror, the correct position of the left side side mirror is to put the distant horizon in the upper and lower positions, and the left and right positions are adjusted to the body occupying the mirror range of 1 4.

7. Adjust the right side of the rearview mirror, because the driver's seat is located on the left side, so the driver's grasp of the situation on the right side of the car is not so easy, coupled with the need for roadside parking sometimes, the right side of the rearview mirror should be left larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror. As for the left and right positions, it is also adjusted to the body occupies 1 4 mirror area.

Before reversing, you need to adjust the car's mirrors, which are equivalent to the car's glasses can be seen with the help of the mirrors to avoid collisions between the vehicle and obstacles. It is a good habit to look in the rearview mirror of dead branches, which can avoid many traffic accidents. When adjusting the mirrors on both sides, make sure that you can see the road halfway through the mirrors when you can see a quarter of the body in the mirrors.

The reversing camera can also be used during reversing. It is more convenient to use the reversing camera and rearview mirror at the same time. Car mirrors are divided into safe zones and danger zones.

One-third of the left-hand area is the danger zone, and two-thirds of the right-hand area is the danger zone, which is a safe place. 2How do you look in the rearview mirror when reversing? In the process of driving the vehicle, when it is observed that the vehicle entering the rear is in a safe and ungeared sensitive area, it means that the distance between the rear vehicle and the vehicle is less than the distance between the vehicle.

In this case, the vehicle can change lanes normally. The premise of changing lanes is to turn on the turn signal, mainly to warn the rear side car. If a rear vehicle is observed in a hazardous area, it indicates that the rear vehicle is in very close proximity to the vehicle.

In this case, it should be foolish to keep driving in a straight line.

Before reversing, you need to adjust the car's rearview mirrors, which are equivalent to the car's glasses. When reversing, you can use the rearview mirror to avoid the vehicle hitting obstacles. It is a good habit to look in the rearview mirror, which can avoid a lot of traffic accidents.

When adjusting the left and right mirrors, it should be ensured that the rearview mirror can see a quarter of the body, and when adjusting up and down, half of the rearview mirror can see the road surface. The reversing camera can also be used during reversing. It is more convenient to use the reversing camera and rearview mirror at the same time.

2What do you think of car mirrors? Car mirrors are divided into safe zones and danger zones. The left third is the danger zone, and the right two-thirds is the safety zone.

During the driving of the vehicle, when the rear vehicle is observed to be in the safe area, it means that the rear vehicle is far away from the vehicle. In this case, the vehicle can be changed to hail normally. 3. Precautions: The premise of changing lanes is to turn on the turn signal, and the main code is to remind the rear vehicle.

If the rear vehicle is observed to be in a danger zone, it means that the rear vehicle is very close to the vehicle. In the case of a delay, it should remain in a straight line.