How to arrange the review schedule of the fire engineer exam

When it comes to exams, each person has a unique way for each person, and that's the old saying, "Only the feet know if the shoes are comfortable or not." So if you let someone tell you the progress of the review, it is difficult to have a standard answer to this, so it is better to arrange it reasonably according to your own situation.

Also, I would like to share a little bit about taking the test for you, I hope it will be helpful to you!

1. Make a short-term revision plan.

Due to the concentration of time for the exam. There are many knowledge points in the exam, and there must be a reasonable plan and arrangement for the pre-exam review. Clarify the key points, prioritize them, and arrange them in as much detail as possible, including the subjects, content and time for review.

Aim to complete the required review subjects and content at a fixed time. No compromise to ensure the full implementation of the relisting plan. The plan should be arranged in such a way that the review content of arts and sciences should be arranged alternately; Memories need to be strengthened in the morning and evening; Arrange focused review content during the "peak" of the individual's daily biological clock; And in the "trough" of their own emotions and energy, arrange secondary review content or arrange entertainment and rest.

You can make a schedule. Allocate the review time of each subject reasonably to avoid the phenomenon of favoritism.

2. Organize and make good use of systematic review materials.

If time permits, the first step in reviewing before the exam should be to organize the review materials appropriately. The basis can be summarized in the previous system.

On the basis of further synthesis and induction, the review content is more systematic, and the knowledge is further "condensed".

If some students do not take good review notes, and they do not have time to make a comprehensive summary and induction before the exam, the materials that need to be arranged for review are scattered on textbooks, notebooks and online school tutorial books. At this point, you can make a list of the key points of revision and then start to review systematically before the exam.

3. Review should be both focused and comprehensive.

Revision should grasp the key points and directions. It does not mean that non-focused content can be ignored. If the content of the review is only focused and nothing else, then it does not matter whether it is important or non-focused.

Some students are reluctant to put in more effort. Always looking for some tips and less review. I don't review if I don't think it's important, and my subjective guesses often don't match the focus of the exam.

Dealing with the exam with cleverness and taking the exam with opportunistic ideas can only deceive oneself and cause endless harm.

Fourth, pay attention to strengthening memory before the exam.

For some memory materials with high accuracy requirements, there will be no clear and accurate impression if you do not strengthen the memory before the test. And these materials are precisely the basic basis for test-taking propositions.

In short, pre-exam revision is also to prepare for the exam. This is the most important preparation before the exam. It not only lays a "material" foundation for answering questions for the exam, but also eliminates mental anxiety before the exam and ensures the best play of intelligence in the exam.

Therefore, if you want to get an excellent score in the exam room. Please start by preparing for the exam.

Finally, I wish you all the best in your exams!!

You can listen to Yingying Bamboo's courses, I just listened to them, and then learn the practice first, eat the practice and synthesis thoroughly, and then learn the case, you must listen to more lectures and do more questions.

For example, the numbers in the fire partition table can be recorded like this.

1.The area can be divided by three, then divided by three is its fireproof partition area, can be divided by four, in addition to its fireproof partition area will come out, can not be divided by three and divided by four, divided by two can get the corresponding fireproof area, and can be divided by three by four, in this case if the area is divided by four above, divided by three below.

2.Then summarize it into a formula: see three divided by three, see four divided by four, three or four divide together, upper four and lower three, three or four do not divide by two.

Well, according to this formula, all the data of the fire partition will be remembered, and the remaining table header has not been remembered, the memory idea of this content is from our first-level fire rapid memory example, if you feel that you can't understand it, you can see it.

3.Other** can also be remembered, I summarize how to use this method of thinking, is to first find out the hidden law of the data, and then turn the law of each row into a formula, and then bring all the different laws together in the **, it becomes a unified formula, compared to the original first data of a whole table, here only use the data content at the beginning of the formula, you can write down the content, which greatly saves the cost and time of learning.

It can be divided into four phases to specify a study plan

Preview stage: It is necessary to study the old textbooks again and have a good understanding of the knowledge of each subject.

Basic stage: It is necessary to carefully study every knowledge point of the new textbook, understand it thoroughly, and mark the content that you do not know.

Intensive stage: Start to do a lot of questions, and at the same time understand the key and difficult points.

Sprint stage: You need to return to the textbook, and you need to take more mock test systems to practice when doing comprehensive questions.

The approximate preparation period is 3-12 months, which varies from person to person and from person to person.

There are three subjects in the first-level fire engineer examination, namely "Fire Safety Technical Practice", "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis", and the focus of the three subjects is as follows:

"Fire Safety Technical Practice" focuses on construction and facilities, and must be based on the principles and integration of the three examinations.

The content of the construction chapter of "Comprehensive Ability of Fire Safety Technology" is almost identical to the content of the technical practice construction chapter, while the facility chapter is mainly practice-oriented.

The content of the construction chapter of "Fire Safety Case Analysis" is mainly practice-oriented, the examination method is mainly to correct errors, the difficulty lies in the facilities, the examination methods are based on multiple-choice questions, error correction, short-answer questions, fault analysis, and the management chapter is mainly based on selection.

After reading the key points of the three subjects, the order of review should be straightened out! The suggested order is "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability", and "Fire Safety Case Analysis".

Second, arrange the review reasonably.

Due to the difficulty of the first-level fire engineer examination and the strong professionalism, it is recommended to spend more time preparing for the exam, generally 6 months is more appropriate, the first 4 months focus on reviewing the "Technical Practice" and "Comprehensive Ability", and the second 2 months to see the example questions of the "Case Analysis", and do the exercises appropriately.

Finally, master revision strategies.

1) Take timely notes. Sort out your new understanding, new perceptions, and new understandings in a timely manner, so as not to always turn over the book.

2) Organize in a timely manner**. Put the combustion performance, fire resistance level, building classification, fire spacing, evacuation distance, width index, some data that need to be memorized for fire protection facilities, etc. Refer to the specification of your own system**, leave the header or content, print it out, fill it in every day**, and strengthen your memory.

Hello, if you have enough time to prepare for the exam, it is recommended that you start preparing for the exam as early as possible.

For example, if you start preparing for the 20-year exam now, you can study the textbook course from December 2019 to April 2020. From May to August, we will learn again and add part of the new textbook; August-September sprint module focused learning; Do the real questions before the exam in October.

In general, the simplest of the three courses is technical practice, followed by comprehensive ability, and case analysis is based on the first two subjects plus some normative provisions, so the key to review is technical practice, and case analysis is the key to passing the exam.

The necessary time should always be sufficient.

The examination of the first-class fire engineer is a unified examination of the whole country, and for candidates with zero foundation, it is recommended that it is best to start preparing for the exam half a year in advance. Of course, everyone's situation is different, and it is best to arrange your study plan according to your own time.

1. First of all, you must understand the content of the first-level fire engineer examination and understand your actual level. However, under normal circumstances, the learning speed of zero-based candidates is not high, and they may not even be able to complete all the study tasks before the exam. Therefore, in order to ensure customs clearance, it is recommended that in addition to working hard to improve your learning ability, you should give priority to learning content that is easy to score.

2. Preparing for the fire engineer fire protection exam, if there is no way to be fast, then everyone must at least be accurate, and strive to do the test, although it may not be plenary, but it must be tested.

3. Regardless of whether the candidate has a foundation or not, the textbook is the first step for the candidate to understand the fire engineer exam. Exam tutorial textbooks are an important basis for fire engineer exam propositions, generally speaking, tutorial textbooks contain the scope of propositions and answer criteria. Candidates should also pay attention to the type and content of the exam questions in previous years, and study the ideas and characteristics of the exam questions.

4. Doing questions is not only a way to test the learning results, but also a good helper to check and fill in the gaps, in the process of doing questions, we should not blindly pursue the number of questions in Lunchang, and despise the quality of the questions, and it is important to do more questions than to do more.

1. For the first time to take the first-class fire engineer exam, the exam is not familiar with the imitation, and the exam is more difficult, so it will be very difficult to review. For candidates who have a certain foundation, it is recommended to decide according to their actual situation. After all, with a certain foundation, you will be more adaptable to the changes in the teaching materials.

2. If the foundation is relatively solid, self-study is completely fine. If the foundation is average, you can also choose to apply for classes, after all, there are many different types of classes set up for different groups of people and different foundations, but if the candidates themselves have a high learning efficiency and want to challenge, self-study is also possible, but they must redouble their efforts.

3. No matter what the situation, if the learning ability is relatively poor, it is recommended that you do not study on your own, after all, the difficulty of the exam is not low. Not only does it take time and energy to fail the exam all the time, but it also costs a lot of money to invest in it, and if the exam timeline is too long, it will make you more and more anxious. It is recommended that you sign up for some tutorial classes and learn from famous teachers, and the time saved by passing the exam as soon as possible is also very valuable.

4. For office workers, it is difficult to have a large chunk of time to review, and it is difficult to enter the review state after work. In this case, it is necessary to register for a class, and now many of them are in the form of online teaching, and you can use scattered time to learn, and you can also play back, which is very convenient.

A few tips on preparing for the Fire Engineer I exam.

To prepare for the exam, you should pay attention to the method and study efficiently. Whether the method is appropriate or not directly determines the success or failure of the exam. Each discipline has its own laws and characteristics, and it is necessary to grasp these characteristics and achieve twice the result with half the effort. Give a general advice:

1.To complete the class content with high quality;

2.Be sure to review the content of the teacher in time after listening to the class, especially the after-class practice questions of each chapter, you must do it yourself when reviewing, not just watch, because there is a big difference between being able to understand and being able to make it independently.

3.When completing a topic, we should consider the knowledge points examined by the topic, what type of question type it belongs to, and what kind of good ideas, methods, and templates there are;

4.The study time should be reasonably arranged, and the study should not only look at the foundation or professional practice for a long time, and the study should have a reasonable match.

One: Reading is not detailed, not thorough, swallowing dates, rote memorization, and no understanding.

Reading books is always guided by the syllabus, and the knowledge points outside the syllabus are ignored, resulting in more points and heavy losses when encountering knowledge points outside the syllabus when taking the exam. There are many knowledge points in the first-level fire engineer that require us to memorize comprehensibly, rather than rote memorization, which will waste a lot of time and result in half the effort. Therefore, candidates must learn to understand memorization and integrate it with actual work.

This is beneficial and harmless for the exam.

2. Blindly divide the key and non-key points, invest too much energy in the key parts, and hastily pass the non-key parts at a glance.

What you get in the exam is the key point, and what you can't get is the non-focus. Therefore, candidates must make a review plan before preparing for the exam, and determine the key and difficult points according to the content of the exam syllabus. In order to facilitate contentious revision.

3. Passive acceptance when doing mock questions, not good at combining teaching materials, drawing inferences from one another, and not delving into the reasons for vague questions, so that the next time you encounter the same topic, you will make the same mistake.

This situation is a situation that often occurs to candidates, so when preparing for the exam, we should conduct in-depth research on our own ambiguous and important problems and solve them, so that we will not lose again in the examination room.

Fire Engineer I.

There are three subjects in the first-level fire engineer examination, namely "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability", and "Fire Safety Case Analysis".

Whether you are a newcomer or an old candidate who has taken the first-class fire engineer exam before, it is recommended that you study the practical and comprehensive key points to lay a solid foundation!

Suggested review order: Technical Practice - > Comprehensive Ability - > Case Analysis.

Foundation stage (duration of study: 3-4 months).

First, take a quick practical course, then study the second practical course in detail, and then start the comprehensive ability learning.

Consolidation phase (duration of study 1-2 months).

After studying the intensive course 2-3 times, you can start to study the standardized course, mainly for the basic main specifications of construction regulations, fire regulations, water regulations, spray regulations, and smoke prevention and exhaust. After learning the norms, start the three-in-one course learning, and cooperate with the exercises to do questions and consolidate.

Sprint phase (duration 1 month).

After learning the content of the consolidation stage, you can carry out practical and comprehensive ability sprint learning, with the analysis of past papers and case presentation.

At this stage, you need to do more questions, especially case analysis, you must practice more, form a certain case thinking, master case skills, and improve writing speed.

Ascending stage (20 days).

After completing the above content learning, you can decide whether you want to carry out elevation learning according to your own learning time and effect, and appropriately learn the special sprint content of the case at this stage.

Pre-test score (study duration: 10 days).

At this stage, the teacher will explain some pitfalls and easy to make mistakes in the exam, share skills, and adjust the mentality to actively take the test.