How many years does it take for cyclamen seedlings to bloom, but how long does it take for cyclamen

It usually blooms in one year.

1. Cyclamen.

It is usually sown in autumn and takes about 12-14 months to flower, but the following techniques can shorten the cultivation cycle and promote early flowering.

2. Reasonable watering of cyclamen, which is a moisture-loving and waterlogging plant, too much water is not conducive to growth and development, and even causes root rot and death. Therefore, it is sufficient to keep the soil moist and the amount of water should not be too large.

3. Increase fertilizer to take humus.

For more fertile sandy loam soils, change the potting soil once a year, and apply potassium dihydrogen phosphate in 2 years in spring and autumn each year.

1 time each, 15-20 days in advance, do not apply high-nitrogen fertilizers.

Note: Creating the right temperature conditions for cyclamen is not resistant to high temperatures. Too high a temperature can put it into a dormant state.

In general, cyclamen is suitable for growing in an environment of around 2 to 10 years, and the temperature can be slightly lower during the seedling stage. In addition, the temperature should be slightly lower when the flower buds are differentiated and the peduncle is elongated, which is conducive to flowering.

Suggestion: If low temperature conditions are created in summer, it can not be dormant, which is conducive to flowering. Extended light conditions: Cyclamen likes sunlight and prolongs the duration of the light, which promotes early flowering. Hormone treatment in the appearance of young buds of cyclamen is treated with 1 mg of gibberellin.

The liquid is gently sprayed on the young buds, spraying 1-3 times a day, and flowering is more than 15 days early.

Persimmon: To make persimmons, it is required to choose large fruits, upright fruit shapes, flat or slightly protruding fruit tops, no longitudinal grooves, high sugar content, moderate water content, and varieties without seeds or few seeds. The persimmon fruit should be fully ripe, the color should be bright red, the heart of the fruit should be empty, and the tip of the bend should be yellow.

After harvesting, the persimmons that are not soft and undamaged are peeled and then dried. There are two drying methods: one is the sun drying method, hanging or flat drying.

The persimmons with crutches after scraping are clamped one by one on a loose rope, hung on a rack to dry according to size, and turned frequently. After 3 or 4 days of drying, when the fruit surface is white, crusty, and the flesh is soft, hold it lightly for the first time and squeeze the pulp. Promotes softening and deastringency.

When the surface of the fruit is dry and wrinkled, pinch it a second time, crush the hard pieces of the flesh, and pinch the ventricles. Then pinch the third time every 2 3 days, pinch off the heart of the fruit from the base, so that the top of the fruit no longer shrinks, and the core varieties should be pinched off or extruded, generally pinched three times. The second is artificial drying, even if the method of baking is used, it should be pinched and soft in time during baking.

Dried persimmons, put into a sealed container or piled together with a plastic sheet, after 4 or 5 days, the persimmon back to soft, take out and put it in a ventilated and cool place to spread out, dry, there is persimmon frost generated. In this way, the more times you pile up and dry, the more times you hang it, the faster the frost comes out, the better, and the persimmons made can be packaged and stored.

Techniques for making persimmons at home (No. 3, 2002).

Abstract: Select the persimmon fruit that has not become soft after harvesting, clean and peel it, dry it for 2 consecutive times, soften it, pinch the cake, choose a cool place to dry and shape, and then place it in a container such as a water tank according to a layer of persimmon and a layer of persimmon skin, seal it, and put it in a cool place for 4 7 days to frost, that is, to complete the whole process of persimmon processing

For experienced bonsai growers, it is not difficult to raise bonsai cyclamen. However, for the average home user, there are often many problems during the maintenance period if they want to raise the cyclamen well and let it bloom smoothly as scheduled. The following is the pot cultivation method I have collected for you, let's take a look!

In fact, as long as everyone can master the maintenance skills and manage them carefully, things often become very simple. The ultimate goal of raising cyclamen is to make it bloom smoothly and give us a glimpse of its beauty. So, how do cyclamen grow to bloom more?

1. In addition to using bulbs to propagate, cyclamen can also use sowing to obtain potted seedlings. For most places, mid-November is a good time to plant. This is because cyclamen seedlings are often unaffected by the temperature and light in the summer months of June and July.

And if we sow seeds at other times, it will be easy to breed seedlings, because cyclamen is more tenacious. However, in this way, it will often be out of its protection period, and it will enter a dormant state in the hot summer weather, which will affect its flowering time. If the seeds are sown in November, the first flowering period will basically enter at this time of the next year, and the full flowering period will be in January and May of the following year.

2. If you sow seeds in November, you will be able to extract 3 leaves in April of the following year, and at the same time grow bulbs with a diameter of about centimeters. At that time, we can transplant the seedlings into small pots with a diameter of 3 inches and maintain them.

Usually small pots are filled with soil close to the rim, and then a small hole is dug in the soil and cyclamen seedlings are planted in it. However, when planting, be careful to expose the bulbs to the surface of the potting soil and then water them thoroughly. During this period, the temperature should be kept between 15°C and 20°C, and shaded in time at noon.

3. After potting the cyclamen seedlings, what we need to do well in the later stage is maintenance and management. Be careful not to water too much, and you need to wait until the potting soil is dry before giving water; You can keep using thin liquid fertilizer once a week, and you can increase the concentration of fertilizer a little during the peak growing season. After entering the summer in June, when the temperature reaches 30°C, in addition to strengthening the shade, it is necessary to stop fertilizer in time.

4. The flowering of cyclamen has high temperature requirements, so keep the temperature at 20°C as much as possible during the flowering period, and pay attention to the smooth ventilation and light transmittance of the environment. However, since the plant will enter a dormant state after the flowering period, we should reduce the watering frequency in time, keep watering once a week, and keep the potting soil slightly moist. At the same time, place the pots in a cool and ventilated place to avoid the rain, so that you can survive the dormant period.

1. How much smallpox blooms.

Cyclamen flowers, if properly maintained, begin to bloom in December each winter, and the flowering time is very long, lasting from February to March of the following year. If the nutrient solution is well cared for, the flowering period may last for about 5 months, and the time span is large. The flowering time is just around the Spring Festival, and a long flowering time can add joy to the home.

Cyclamen is a perennial plant that blooms for many years, but after the sixth year, the bulbs gradually age, and the flowers are in full bloom and need to be replanted.

2. How to extend the flowering period.

1. Don't move: During the flowering period, don't move the flower pot casually, otherwise the growth environment will change, and the flowers will also be affected to a certain extent, causing the flowers to fall early.

2. Control water: During the flowering period, you need to control the water and don't give too much water, otherwise it will cause the flower buds to fall off in advance. However, the potting soil should not be drought, otherwise flowering will also be affected.

3. Normal light: Give normal light and contact with soft light. The sunlight should not be too strong, lack of light or burns will cause the petals to fall early.

1) Its flowering period is mainly concentrated in winter. Flowers begin to bloom in December and can last from February to March. With proper care, it can last up to five months to bloom.

In this stage, important festivals such as New Year's Day, Spring Festival, and Lantern Festival are included, which can add to the festivities.

2) In addition, depending on the environmental conditions, it is possible to bloom in summer. However, winter is still the most important stage.

1) Temperature: Because the flowering period is in winter, temperature has become one of the key factors for maintenance. During the day, it is best to keep the temperature between 18 and 22 degrees.

In the dark, preferably at ten to twelve degrees. If it is below seven or eight degrees, it will bloom again, but the flowering period will be delayed accordingly. If it is lower, below five or six degrees, then the plant may not bloom, and even if it does, the quality of the flowers will not be good.

Therefore, the temperature is the first guarantee.

2) Moisture: With the arrival of the flowering period, the plant's demand for water will increase accordingly. If there is a lack of moisture, the flowering period will also be delayed and the leaves will turn yellow.

Well, when we observe the phenomenon of potting soil drying out, we need to replenish water in time. When watering, do not pour it on its bulbs to avoid rotting.

3) Fertilizer: From the formation of flower buds to flowering, plants need nutrients. At this time, it is best to fertilize regularly to ensure that the ratio of flowers and leaves is one to one. Of course, you don't need to have too many times, just once a week to 10 days.

4) Light: This plant itself is light-loving, not to mention that during the flowering period, the ascending type naturally needs light. Placing it in a well-lit place can promote the development of flowers.

The time from planting to flowering varies from planting to flowering. Large-flowered cyclamen takes 14 months, while small-flowered cyclamen bloom in 12 months.

The seeds I planted in early autumn last year germinated around January, and this autumn and winter they have buds, which are a little cold, and they haven't bloomed yet.

:'( :'( :'(I sowed it once, it didn't germinate for more than a month, and when I opened the soil, the seeds were skinned.)