How to make the distance from the pattern to both ends of the embroidery frame equal when the comput

Set the starting point of the pattern in the center.

Generally, the first line is the reading tape, the second line is to set the color sequence, the third line is the frame, the last line is the machine parameters, the first step is to make the embroidery tape on your own computer, or you can make it through the external plate making center, or the customer provides it. Then save the tape to a floppy disk or USB stick--- depending on how you type it into the embroidery machine. Step 3:

After entering the tape into the embroidery machine, select the plate tape to be embroidered from the embroidery machine's memory. Then set the embroidery point (the place where the first needle begins to embroider), check the border (the master can bypass this process) - check how large the embroidery area of the pattern to be embroidered, set the order of line color, and then lay the backing paper (there are many kinds of materials), and embroider the tie rod once (the crossbar under the platen, pull to the left is to start and fast-forward, to the right is to stop and reverse), embroider the outer frame on the backing paper, cut off the outer frame with scissors, paste double-sided tape on the periphery, and lay the backing paper at the bottom of the previous backing paper (generally two layers), Paste your fabric, align the position, and embroider the lever.

Find a good position, read into the flower plate, make up the order of line change, and that's it.

Don't talk about reading patterns, there are a variety of positions, I simply say open the left and right positions, the left and right positions should understand! After reading the pattern, select a combination pattern "The combination pattern number is the pattern number you don't use, if you read the pattern is 1 you enter the combination pattern number can be 2 3 4 ......Wait: "After entering the combination pattern, you will enter the position number you read in the direction of your own set, on the second page, the pattern number is the same as the first page, but the direction has to change, and there is a distance to set, the distance depends on the head distance setting, in the exit is to save, in the selection of your combination pattern is not OK? The same direction and distance cannot be changed ......"I'm talking about Dahao's computer head, and I don't know about the rest......

Out of the belt, read the tape, choose the pattern, confirm, the right starting point is OK

There are manuals inside the machine to teach you how to embroider, the model of each machine is different, and the colors that can be embroidered are not the same.

Hello. First of all, you need to know where the embroidery point of the plate is, and then put the sample in the right place.

Then confirm the lower position so that it does not cross the frame.

Then press the scissor button and adjust the position to the starting point.

The easiest way is to make it in the plate-making software, and you can do it directly.

If you want to learn the version software, you can find me.

If you want to embroider the border, you have to choose auxiliary management in the state of removing the embroidery - operation around the pattern - extend the current pattern border embroidery opening line!

1. Remove the embroidery preparation (embroidery preparation - OK) first

2. Press the selection pattern - select the embroidery pattern - confirm.

3. Arrow keys or page turn keys to select the pattern you want - OK - OK - OK 4 - Set the embroidery point (parameter setting - 3 - OK - OK remember the middle two values) 5 - Press the arrow keys - left - up to make the embroidery frame exceed the limit Then press clearly to clear xy to 0 Add 10 to each after the value you just remembered is correct

6. Set the color change.

7. Embroidery preparation - OK

You may not have lifted the embroidery preparation, if there is anything I don't understand, I will do it myself.

Disk storage pattern input into the computer, select the pattern, set the origin, pull the switch, and you're done.

Why don't you have to look for a wish first?

It's simple. The manual is also available.