Fishing grass carp in the black pit, double hooking, hanging corn kernels, adjusting drifting, adjus

Adjust the five eyes to fish two or three eyes.

Black pit. It is different from the nature of reservoir fishing, which refers to not only the different species of fishing, but also the density, size and size of the fish in the fishing waters, the fat and thinness of the water body, to the influence of different weather in the fishing waters, and the bottom of the water.

Sunny fishing and cloudy days.

Fishing is two different things, the difference between high temperature and low temperature fishing is also quite large, fishing in muddy water on sunny days, fishing in deep water, and fishing in far water. On cloudy days, you can fish for clear water, shallow water, and near water. On sunny days, the light is strong, and it is good to fish for carp in muddy waters.

The light is weak on cloudy days, so it is good to fish for carp in shallow water. As for looking at the air temperature, in addition to looking at the basic temperature, we should also look at the temperature difference. When the temperature is below 5 and above 35, some fish will stop eating and it will be difficult to catch them.

Whether to catch pelagic or demersal fish depends on the quality of the water. The water quality is divided into clear, fat and thin, good water and bad water. There are two kinds of muddy water: muddy water and fresh muddy water; There are pure clear water and cultivated clear water.

Fat water and thin water, the path is clear, good water and bad water, you can know it when you smell it. If it's muddy water, cloudy or rainy, don't fish, but instead fish on a sunny day. Aquaculture clear water can be fished deep and far.

If it is fertile water, it is oily green, regardless of sunny and cloudy days, if you want to fish for floating food and pelagic fish, you should fish for bighead carp.

Mainly. It is thin water, the water quality is light yellow, and it can be fished regardless of whether it is cloudy or sunny.

The empty hook and half water drift, leveling the water fishing three or four eyes on the line, fishing grass carp float to adjust a little better.

30-50 cm water depth. Grass carp is a pelagic feeding fish, and when using corn to fish floats, the water depth is about 30-50 cm. When using corn float fishing grass carp, take fresh tender corn, wash it and cook it, and soak it in koji wine for about 2 days.

In the case of hanging corn fishing, most of them will choose a relatively large fishing hook, and hang one or two tender corn on each hook to fish, and use the method of bait to adjust the drift. At the same time, the nest spoon is used to continuously and frequently throw particles or corn to complete the steps of attracting fish.

Because grass carp like to swim in clusters, grass carp has the characteristics of liking quietness and fearing shock, warmth and wind, which should be paid special attention to in the process of selecting fishing positions and fishing. When floating grass carp, according to its warm and windy characteristics, it can be fished in the middle and lower layers in the morning or when there is wind, and it is best to fish in the middle and upper layers in the afternoon or in the first half of the night.

In the morning, grass carp should be fished in a clear water area and avoid muddy water. In addition, the fishing spot is mostly selected in the deep water area, or at the junction of deep water. The first thing to consider is to choose a secluded fishing spot, if it is secluded and muddy, you can catch grass carp at a water depth of about 1 meter.

If there are one or several large trees on the shore near the water, it is also a good fishing spot under the large trees, especially when the wind blows from the direction of the large trees to the water, and if the wind is in this direction for two to three days in a row, this is a great fishing spot.

Summary. Hello to find the bottom: first set up the fishing rig, throw it into the water, and let them slowly move up until the water is just flat, or 1 mesh above the water.

Trim the lead skin: After adjusting it, let the float move down the distance about the length of the fish float, then slowly trim the lead skin to adjust its weight, and let them move slowly in the water until they are exposed. Fishing:

Hang the corn well, and the fishing mesh is generally about 1 mesh. If the wind and waves are strong and the current is fast, the fishing eye can be about 2 meshes.

Hello to find the bottom: first install the fishing plum group, throw it into the water, and let them slowly move up until the water is just flat, or the water surface is 1 mesh. Trim lead skin:

Once adjusted, move the float down to about the length of the fish float hall, then slowly trim the lead skin to adjust its weight and let them move slowly in the water until it comes to the surface. Fishing mesh: Hang the corn well, and the fishing mesh is generally about 1 mesh.

If the wind and waves are strong and the current is sluggish, the fishing eye can be about 2 meshes.

The black pit uses corn to fish for carp float and adjust a few meshes.

1. Find the bottom and wrap the heavy lead skin on the lead spring leather seat, so that the weight of the lead skin is much greater than the amount of lead eaten by the float, throw the fishing line into the water ruthlessly, and move the float position up and down until the tail is level with the water surface, and complete the bottom finding work. 2. Pull down the float with an empty hook, and the length of the pull-down is 10 grams of silver and a rough book more than the length of the strand, and trim the lead skin until the float is exposed to 4 to 5 meshes on the surface of the water that refuses to sleep, and a few meshes that leak out are a few meshes. 3. Hang the double hook of the ear fishing eye on the corn, throw the hook into the designated area, and move the stool letter up and down to float, so that the float is exposed to the water surface 2-3 mesh (the number of exposed mesh is the Fenghong fishing eye) can be fished.

The steps for fishing grass carp and hanging corn kernels are as follows:

The materials and tools required for grass carp fishing to hang corn kernels are as follows: fishing rods, fishing lines, floats, sinkers, hooks, corn kernels, etc.

1. Choose the right float: choose the appropriate float according to the water environment of fishing and the behavior habits of grass carp. Grass carp often feed near the surface of the water, and floats are usually used to adjust the floating state of the bait so that it falls into the water layer where the grass carp is active.

2. Hang the hook: fix the hook with the appropriate size at the end of the fishing line, and you can use the line set device or the fishing line knot. The size of the hook should be selected according to the fishing target, the size of the fish mouth and the situation of the fishing spot.

3. Prepare bait: Use fresh corn kernels as bait and thread an appropriate amount of corn kernels on the fishing hook. It is usually possible to pass through two or three kernels, but be careful to keep the bait a moderate size and not too big or too small.

4. Start fishing: Semi-immerse yourself in the water according to the adjusted floating state, put the bait near the target fishing point, and wait for the grass carp to bite. While waiting, keep quiet, watch for subtle changes in the float, and cast bait at the right time to attract the attention of Zheng Bi of the grass carp.

Tips and tricks of grass carp fishing

Grass carp fishing is a popular recreational activity, and here are some tips and tricks for grass carp fishing: Grass carp fishing requires choosing the right spot and bait. Grass carp like to be active in places that are relatively hidden or have abundant aquatic plants, such as clear water and river bays.

Commonly used fishing baits include corn kernels, flour, wheat, etc. You can choose according to the fishing spot and season. When fishing for grass carp, you need to be quiet and patient.

Grass carp generally move slowly, and the bite time is not easy to grasp.

In the process of waiting, we should be quiet, observe the slight shouting of the float, and be patient and wait for the opportunity for the grass carp to take the bait. Take care to control the amount and size of bait. Use the bait in moderation, not too much or too little.

The size of the bait should also be moderate, not too large or too small, so that the grass carp can easily swallow it. Flexibility to adjust the depth and position of the drift. Depending on the situation, we can adjust the floating state and the location of the fishing spot in due course.

According to the fish and water conditions, we can choose different fishing methods and techniques in Zeling, such as static fishing, throwing fishing, floating fishing, etc. Skillful use of these fishing methods and techniques can improve the effectiveness of grass carp fishing. Grass carp fishing requires a certain amount of skill and patience.

Choosing the right fishing spot and bait, keeping quiet, observing the subtle changes of the float, and using the fishing method and technique wisely will help to increase the success rate of grass carp fishing. Grass carp fishing is also a relaxing activity that allows us to enjoy the tranquility and beauty of nature.

1. First of all, according to the size of your drift, roll the lead skin to the lead seat, the weight of the lead skin should be enough to float into the water, and slowly move the drift up until the tip of the drift leaks, at this time your hook has been to the end, the distance from the tip of the drift tip to the hook is the depth of the fishing point.

2. Move the drift to one end of the hook, and the distance between the drift and the hook must be less than the water depth (generally about 2 3), and the drift will still be submerged in the water.

3. Use scissors to cut off the lead skin on the lead seat little by little, until the tip of the drift is exposed to the water surface for 2-3 meshes, and the drifting is completed.

4. Hang corn kernels on the hook, float and submerge into the water, move the drift up until the tip of the drift is exposed 2-3 mesh, and the bait is already in the end. If you want to adjust it sluggishly, you can let the drift tip show a few more eyes. If you want to be sensitive, just let the tip of the drift show 1-2 meshes.

Extended Materials. Introduction to the methodology.

1. Drifting. 1) Drifting adjustment is actually to adjust the remaining buoyancy of the float by increasing or decreasing the lead skin, so as to change the state of the hook bait at the bottom of the water and adapt to the needs of different fishing methods. The smaller the residual buoyancy of the float, the more agile the float will be, and vice versa, the more dull it will be.

2) But the purpose of the drift is to fish, I do not advocate the separate study of the fishing, the fishing should be integrated, in the process of fishing, the main thing is to control the state of the bait at the bottom of the water, and get the signal that the buoy is easiest to capture.

2. Hookless drifting method.

Just don't hook it, just adjust the drift directly. In the absence of a hook, the position of the tune is your most blunt point; Hang the hook, hang the bait, and the number of eyes exposed is your most spiritual point. Between the dullest point and the most agile point are all your fishing spots.

3. Drifting steps.

This drifting method is based on the standard 4 fishing and 2 fishing groups.

1. Half water without hook to find the mesh.

Cut off the double hook of the original fishing group, adjust the water without a hook, and look at its mesh, which is the mesh. (Assuming 11 meshes at this point).

2. Find the most blunt point without bait with a hook.

Find the most blunt point. Tie the hook to find the bottom, and always find the position when there is no hook in half water (11 mesh), then don't push it forcibly, this mesh is the most blunt pants to know the point, and fix the mark with a space bean. (It may be hooked to the end at 9 mesh, and continue to push up until 11 mesh).

3. Half-water belt hook bait to find the mesh.

Bring a double bait and half water to drift, look at the number of meshes at this time, this mesh is the mesh number of the most spiritual point to find below. (Assuming that it is nearly 1 mesh at this time).

4. Hook and hang bait to find the most spiritual point.

Find the most intelligent point. Continue to push the drift up to the bottom until the number of meshes found is slightly larger than the number of meshes found above. At this time, the number of meshes is the most spiritual point, and it is fixed with space beans.

Find the bottom: hang the heavy lead throwing rod, the fish float will fall first under the action of heavy lead, and then pull up and float to the state of the exposed water surface, and observe the water depth. Adjust to flat water:

After finding the bottom, move the float up again, and then slowly reduce the weight of the lead skin, so that the float is slowly in a rising state until it stops after the water is flat. Adjust the fishing mesh: hang the bait on the double hook, and then adjust the fishing mesh, which is generally about 2 meshes.

If the wind and waves are too strong, you can adjust it to a higher level. <

Bait is one of the most important substances and can play a very important role when fishing. There are many specific types of bait, which can be divided into meat bait and vegetarian bait from the perspective of relatively large categories, and there are many sub-categories in these two categories. In the latter case, corn kernels are a type that is often used, and the effect is also good.

Moreover, from the point of view of hooking, if you use corn kernels, the hook is relatively convenient and effective.

In terms of taste, corn kernels have a cereal flavor and sweetness, so they can play a very good role in attracting fish that like these two flavors. There are many fish that like these two flavors, some are vegetarian fish, some are omnivorous species, and they can be fished. Of course, there will be certain differences in the specific selection, such as differences in processing methods, etc., which can be treated with wine or with sweet substances.

As mentioned above, it is possible to fish with corn kernels, and the results are relatively good. Drifting is an important step when using corn kernels for fishing, and finding the bottom is a step that needs to be carried out when blending. Specifically, you can follow the following steps:

1. Bottoming: The bottoming is best carried out before drifting, in order to better understand the state of the waters. First of all, you need to install all the tools in the fishing rig, and the main thing to pay attention to is the heavy lead, which is needed when finding the bottom.

Under its influence, the float will descend first, and then pull up the float until it is above the water, so that it is easier to observe the depth of the water.

2. Adjust to flat water: start to adjust the drift after finding the bottom. Pull the float back down some distance. Then, let the weight of the lead skin slowly decrease, generally by slowly trimming the lead skin. In this way, the fish can slowly rise in the water until it is flat and then stop.

3. Adjust the fishing mesh: Finally, you need to adjust the fishing mesh. The mesh needs to be adjusted after the bait is hung.

If you are using a double hook, you need to hang the corn on the double hook at this time. In general, it is more appropriate to have about 2 meshes. However, if the wind and waves are relatively large at this time, you can make the number of meshes larger.

This is more resilient to the threat of wind and waves.

The temperature rises, the fish condition of the big fish gradually improves, and this is also the time when the crucian carp is gradually difficult to fish, so from the late spring stage, it is the first choice to go to the big water surface to guard the big fish. Because the common carp, grass carp, and herring fish breed in late spring and early summer, and in late spring it is the time to forage for a large number of fish to breed.

There are many secret recipes for corn kernels, which can be used as bait or nest, and are the most frequently used nest materials and bait when fishing big fish. Prepare some tender corn in advance, take out the corn kernels after freezing hard in the refrigerator, prepare a bucket in advance, put the corn kernels into it and soak it with beer, you can use it the next day, and you can make bait and nest; Prepare tender corn in advance, cut the corn kernels with the roots, add sour milk and stir evenly, and make a nest as bait, which is extremely easy to make; The old corn is soaked soft, steamed in the pot, 4 catties of corn a small packet of sweet wine koji (before and after 15 grams) is stirred evenly, and the sealing is alcoholic, which is also an excellent bait for fishing the bottom big fish, even if it is a big fish, the actual effect of making a nest is also good.

When fishing, if the hook is wrong, the corn will block the mouth when the fish raises the rod while eating the corn. At this time, it is very easy to cause a block, resulting in a missed fish. The hook is hung on the corn to expose the tip of the hook.

Hang the hook a little next to the corn kernel and hang the corn in the hook door so that the hook is exposed. That way, when the fish eats the corn kernels, it is very easy to get hooked.

When fishing with corn, it is also important to choose a hook, if the hook is too small, the hook will not be able to show the tip of the hook, and the fish will not be able to sting. Therefore, when hanging corn kernels, the fish hook should exceed the corn kernels. The hanging corn is all fish with large needles, so the wire of the hook must also be thicker to ensure that it is not straightened when the fish are large in China.

Hanging corn kernel gourd baby is highly recommended, preferably Iseni No. 5, No. 6. New Kanto No. 1, Chiyo and the like, are not easy to be straightened and broken when they are big fish in China.

However, after the arrival of summer, some product baits lost their advantages. Because at this time, whether it is fishing in the Yinbing River or in the large reservoir, the product bait cannot bypass the small trash fish. Therefore, corn that does not make noise or noisy fish has become the preferred bait for anglers.

If the corn kernels hang on the hook when the hook is hooked, when the fish eats the corn kernels. The tip of the hook of the rod can not immediately pierce the corn, and the fish cannot be pierced early, which is also a key factor in the black drift and the fish. Therefore, when hanging corn fishing, the tip of the hook must be exposed before the fish can be stung.