I bought a wireless router, but I can t log on to 192 168 1 1, ask for a high finger! Thank you!

The network cable of the cat is plugged into the WLAN port of the router, and the LAN port of the router is plugged into 1 network cable to connect to the computer or laptop, and the IP address of the IPv4 protocol of the local connection attribute is changed to ? It is not equal to 1, and the local connection is displayed to be connected, at this time you can log in to set up the router and let the router dial.

If there is only 1 network cable, then don't connect the router to the cat first, you can set up the router first, take the network cable to the cat to connect the router, and then use the wireless network for the laptop. When you set it, you also need to change the IP address to automatically get, because the router will automatically assign the IP address to by default. Or choose to get it automatically at the outset.

IPv4 address

Subnet Mask

Default gateway. .

For a new wireless router, how can I log in to the wireless router without a network cable? Your kind of approach is not feasible. A network cable is required. Newly bought routers generally have wireless turned off by default, and they can't connect if they want to connect wirelessly.

If you are sure that you have connected to this wireless router, then take a look at the address you automatically obtained. You can use ipconfig to see what your gateway address is and then use a browser to access it.

Dear, hello, I'm glad to answer for you, what is the reason why the router can't get in: 1. Default**General router**, enter the router option**are, this is the default, but some routers are not next to the segment, it may be or other. And this ** is not fixed.

Please note the following: Check the router manual, the default ** of the router options and the password manual are all indicated. To enter the correct format, simply enter the default format in your browser (e.g. .

You don't need to enter any other characters. 2. The wrong password of the user name or account is incorrect, which is divided into the following situations; You entered the default password incorrectly, the default password was changed3, and you were restricted from logging in to the routerIn some cases, even if you enter the correct password, you can't go to the briefing, because you can set permissions in the router, so that only some computers can log in to the router option. 4. The router runs for a long timeSometimes the router runs for too long, even if the ** is entered correctly, the password is also correct, and the router may not be able to log in.

Routers can select data information between different networks or network segments according to routing protocols, and have become one of the most important network interconnection devices. So do you know what to do if the router can't get in 19216811? Here are some relevant information I have compiled about the router 19216811 not getting in for your reference.

The solution to the 19216811 of the router can't get in:

Let's first check if there is an error in the router login address you entered, because some routers are login, and some routers may be other login addresses such as etc., so how do we check the login address of the router? We can find the login address of your router on the back of the router as well as the login and password! If your router is not this login address, you can replace the address used in this article with the default address of your router to operate!

If you make sure that the router address entered in your browser is correct, you still can't log in. Please make sure that the router is connected correctly and that the router and the computer are connected correctly! The WAN port of the router should be connected to the broadband modem, and the LAN port should be connected to the computer network card!

If you confirm that there is no problem with the router connection, we can now restore the router to factory settings! There is a reset button behind the router, we press and hold this key for about 10 seconds, wait for the router indicator to be fully lit! Of course, different routers may have different recovery times, you can refer to your router's manual for details.

This way we've restored the default settings to the router!

Now you enter your router address in the browser, assuming it is this], to see if you can enter the router, if you can't log in to the router, we can check whether the router has been connected to the signal, we enter the command cmd in the search box of the start menu, and then open the command prompt window! Then type ping in the command prompt window and press enter to see the prompt message!

If the router connection is normal, but we can't wait for the router after returning to the browser, we can try to change the IP address of the local connection, so that the IP address can be automatically obtained! Since my computer is a win7 system, let's open the local connection and check the properties! Change both IP and DNS to auto-fetch!

Now if you can't log in to the router, I really don't know what to do! Then let's try it with a different browser.,I've personally encountered such a problem.,I changed a browser after the drawback.,And then enter the address of the router and finally log in successfully! Let me toss for a long time, only to find out that it is a problem with the browser, of course, this problem can not be ignored!

1.Detailed tutorial to remove router username and password.

2.Teach you how to install a router simply.

3.How to check the router address.

4.Router installation.

5.What does a router consist of.

Router login.

Hello, I am glad to serve you and give you the following answers: 1. Steps to log in to the router: (1) First of all, you need to connect the router, which can be connected by wired connection or wireless connection.

2) Then, you need to open your browser, enter the IP address of your router, i.e., press enter. (3) Next, you need to enter the username and password of the router, in general, the username and password are admin, if it is not a spine, please check the manual of the router. (4) Finally, you can enter the management interface of the router, where you can set various parameters of the router to meet your needs.

2. Possible problems and solutions: (1) Unable to access the router: Cause:

It could be due to the router's IP address being changed, or there is a problem with the router's network connection. Solution: Check whether the IP address of the router has been changed, if so, please reset the IP address of the router; If not, check if the network connection of the road Sakura Yoyuki is normal, and if not, reconnect the router.

2) Unable to log in to the router: Reason: It may be due to the router's username and password being changed, or there is a problem with the router's network connection.

Solution: Check whether the username and password of the router have been changed, if so, please reset the username and password of the router; If not, check if your router's network connection is working.