How to pack W7 on disc? How to install w7 system with disc Steps to install w7 system with disc

1. Press the DEL button or F2 key to enter the CMOS setting when booting up, different motherboard buttons are different, you need to pay attention to the English prompt in the lower left corner when booting up;

2. After entering CMOS, there is a setting that is the first or second item on the left, selected, different motherboards are also different, most of them are the second item, click Enter to enter;

3、There is an option to boot up,This is the key to the problem,First choose the optical drive,I don't know if you're safe***,There will be options after you enter,You find ***That,Select it;

4. Press F10 to save and exit, reboot, and you can start from the optical drive.

All of the above is based on your experience with English or motherboard CMOS settings, and there is another method that is generally used for computer maintenance

After booting, after the memory self-test, press F12 or F2 to enter the boot selection, (remember, this is not pressed as soon as the computer is turned on, press early, some motherboards will enter CMOS) Different settings for different motherboards, but F12 is used more. After pressing, a selection box will appear on the screen, check *** or ***-rw or the like, which is the optical drive installed on your machine, click enter and it's OK!

During working hours, pure hand-to-hand play, just be satisfied. I hope mine is helpful to you, and you won't add me as a friend.

If you need to install the W7 system on your computer, there are many ways to do it. However, if you want to install the W7 system with a disc through the traditional optical disc method, then you can refer to the steps introduced to you next to install the W7 system with a disc.

Original Win7iso Burn Disc Installation Tutorial.

U disk boot disk installation W7 system method sharing.

1. Tools required1. A computer with a first-class optical drive.

2. System image: Deepin Technology Win7 Ultimate Edition.

3. W7 CD: How to burn win7 system installation lead CD.

4. Boot settings: How to set up boot from CD.

4. Partition setting: Guangzhi Xun disc installation system is divided into good area tutorials.

2. W7 Optical Disc System Installation Tutorial1. Put the W7 system installation disc into the computer CD-ROM drive, restart the computer and press the corresponding shortcut keys such as F12, F11, ESC, etc., select *** startup item, and press Enter;

2. After startup, the main menu of the installation disc will be displayed, and you can choose to install the system to the first partition of the hard disk;

3. Go to the interface shown in the following figure to perform the system restoration operation;

4. After completion, the computer will automatically restart, and then start to install W7 system components, drivers, etc.;

5. After the installation is completed, reboot the W7 system desktop to successfully install.

If you don't know how to install the W7 system with a CD-ROM, you can install it according to the above steps.

1Open the optical drive and put it into the disc, then restart the computer, keep pressing the delete key of your keyboard, so that you can enter the motherboard configuration interface, and then select the cdrom mode to start the computer under the boot option, and then press F10 to save, the computer will automatically restart, 2, after the restart, you will press the loading prompt to the next step, 3, and enter the system after installation.

How to reinstall the system Method 1: First, make sure that your optical drive is in the first boot order and supports booting from the optical drive. To install from a disc, set up the BIOS so that the system can boot from the disc.

Here's how to do it: (1) Start the computer, and when the press del to enter BIOS setup message is displayed on the screen, press the Del key on the keyboard to enter and play the motherboard BIOS setup interface. (2) Select the Advanced BIOS Features option and press Enter to enter the setup program.

Select the First Boot Device option, then press the Page Up or Page Down key on your keyboard to set it to a CD-ROM, so that you can change the system to CD-ROM boot. (3) Go back to the main menu and save the BIOS settings. (The save method is:.)

Press F10, and then press the Y key) (4) Then put the disc into the optical drive, and restart the computer, the system will boot from the disc and display the installation wizard interface, you can follow the prompts step by step to install the settings on the OK.