Is there a difference between the Baojun 630 oil pan and the 730

Hello, this one makes no difference, if my answer is helpful to you, please set it to.

Hello, there is no difference between the Baojun 630 oil pan and the 730. If mine is helpful to you, please set it to the best.

Hello, the oil pan of these two cars is the same, there is no difference. FYI.

Baojun 730 oil pan screw size is 17, Baojun 730 is an MPV model of Baojun, the wheelbase of this car is 2750 mm, the length, width and height are 4780 mm, 1780 mm, 1740 mm.

There is no big problem without the original one, and the current analogues and the original parts are also wrong by 3 percent. If it is not original, it mainly depends on whether the paint in the oil pan is easy to fall off, generally after a long time of use of high temperature oil, the paint of the oil pan is easy to take off, resulting in the blockage of the oil pump filter, which will seriously affect the lubrication system of the engine, if the blockage is too serious, it will cause the phenomenon of piston cylinder, crankshaft and camshaft locking. If the building mainly uses the parts of the analogue, it is recommended to remove the paint of the oil pan in advance to avoid the above problems On April 11, Baojun RS-5 was officially launched.

The Baojun RS-5 is equipped with Level 2 autonomous driving assistance system and intelligent car connectivity system. It has 14 functions in intelligent driving, covering most travel scenarios. Baojun RS-5 is equipped with an intelligent car networking system, with in-car voice operation, mobile phone APP remote control, ** lifetime unlimited upgrades and other functions.

Photo by Pacific Automobile Network Q&A).

Front suspension. The front suspension of Baojun 730 is a MacPherson type single suspension, which is mostly used in the front suspension of automobile engine front-wheel drive car series, and its simple structure occupies less space, which is conducive to the layout of the engine and the cover. The rear suspension is again a torsion beam type non-separate rear suspension.

This kind of suspension structure is simple to build, occupies a small space, and the project cost is cost-effective, so the space of Baojun 730 is an advantage. The suspension parts of the brother are made of stainless steel plate, and the lower swing arm and subframe are welded by two-layer stamping die thick steel plate, and the overall bending rigidity is better than that of the single-sided stamping die thick steel plate.

Rear suspension. The torsion beam rear suspension is easy to construct (the Pleasure model is equipped with multi-link independent suspension). It is commonly found in small cars because it is low-cost to manufacture, easy to overhaul and takes up less chassis space, which can reduce the aspect ratio of the chassis and improve the space in the car.

In terms of riding comfort, the rear suspension of the torsion beam is not as comfortable as the suspension alone, but fully considering that the Baojun 730 also has the role of loading, the application of the rear suspension of the torsion beam will make the suspension have a good stiffness of the main performance.

Other key points.

The Baojun 730 diesel engine and transmission are equipped with plastic rain shields in front of them, but the range of the rain shields is relatively small, and it cannot fully cover all the engine oil pans and transmission chain bumpers. The covering parts of the front tire arch are the same plastic parts, and the coverage of the front tire arch will be higher than that of the rear tire arch. Therefore, in the rear seat of the Baojun 730, the noise from the wheel arches will be widely large.

Millions of car purchase subsidies.

About 800-1000 yuan. If you go to the auto repair shop to replace the original oil pan, it will be about 800 yuan, and then it will help you refill the new oil, so the total cost is about 1000 yuan. But if you go to the 4S store to replace it, you have to mention it separately, and the cost may reach more than 1500 yuan, after all, the working hours of the 4S store have made it difficult for many partners to accept.

So, a project like replacing an oil pan is not very complicated, in fact, we can go to a large-scale auto repair shop to replace it.

Considerations for automotive engine oil pans.

Oil pans can be divided into wet and dry types. In addition, we need to understand two hail concepts first, splash lubrication: for the engine, the oil in the oil pan is lifted by the rotation of the crankshaft and "splashed" on the friction surface to achieve lubrication; Pressure lubrication:

The oil pump pumps the oil and sends it to the required parts at a certain pressure to protect it.

Dry sumps are used in many racing engines. It does not store oil in the oil pan, and more precisely, there is no oil pan in the source hail sail. The friction surfaces of these movements in the Quyan Zen axle box are lubricated by pressing out the oil through the measuring holes.

Since the dry sump engine cancels the function of the oil pan to store oil, the height of the pan is greatly reduced.

Summary. The power is still quite sufficient, because it is usually driven in the urban area, and the road conditions are relatively good, so there will be no lack of power. However, fuel consumption is a bit high, in the urban traffic jam can reach about 10 oil, if it is in the suburbs with fewer vehicles, it is basically about 9 oil, it may be that the level of their own driving needs to be improved.

However, this fuel consumption is acceptable to itself, after all, the car has a wide body.

The pro-16 Baojun 730 fuel tank is coated.

There is a protective layer on the outside of the tank.

In terms of comfort, although the car is relatively low, the comfort is not bad, and the interior design is simple and atmospheric, which is more in line with their own needs for repentance. Because when I bought the car, I chose a mid-range version of the model, so the softness of the seats in the car is relatively moderate, and it is quite comfortable to sit in the fingers.

The power is still quite sufficient, because it is usually opened in the urban area, and the road conditions are relatively good, so there will be no lack of power. However, fuel consumption is a bit high, in the urban traffic jam can reach about 10 oil, if it is in the suburbs with fewer vehicles, it is basically about 9 oil, it may be that the level of their own driving needs to be improved. However, this fuel consumption can also be accepted by itself, after all, this car is slender and wide.

Baojun 730 with Total 75W-90 model gear oil, Baojun 730 length, width and height are 4780mm, 1780mm, 1740mm, wheelbase of 2750mm, body type 5-door 7-seat MPV, gearbox for 6-speed manual transmission, maximum speed of 150 kilometers per hour.

Baojun 730 transmission fluid can be used Total 75W-90, Baojun 560 manual transmission fluid is changed for the first time when 5,000 km or 3 months have been driven, the second time is after 10,000 km or 2 years, and then every 20,000 km or 2 years.

Transmission fluid is gear oil. The lubricant is the same for manual transmission oil, gear oil, automatic transmission oil and power steering oil. Gear oil is mainly petroleum lubricating oil base oil or synthetic lubricating oil, and is an important lubricating oil prepared by adding extreme pressure anti-wear agent Qingwu Qihe oily agent.

It is used in various gear transmission devices to prevent tooth surface wear, abrasion, sintering, etc., prolong its service life, and improve the efficiency of power transmission.

Transmission oil is an oil that keeps the transmission system clean, which can play a role in ensuring the normal operation of the transmission and prolonging the life of the transmission. In terms of oil characteristics, the most intuitive is that the viscosity of manual transmission is larger than that of automatic transmission oil, and the replacement cycle is generally shorter than that of automatic transmission oil.

Photo by Pacific Automobile Network Q&A).