What should I do if I quit the phone launcher and won t turn on 40

Updated on technology 2024-04-13
7 answers
  1. Anonymous users2024-02-07

    Generally, the mobile phone cannot be turned on for the following reasons, which can be self-checked.

    1) Check whether there is a virus on your phone.

    If the phone suddenly and frequently restarts, it is likely that it is a virus. You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up.

    2) Uninstall some unnecessary software.

    If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to run and restart.

    3) Software conflict issues.

    If you think about whether you have installed or upgraded any software recently, it is often these software conflicts that cause the system to restart automatically, so you only need to uninstall the software that caused the conflict.

    4) Factory reset.

    If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so.

    5) There is a problem with the SIM card.

    In addition to the internal software problems of the phone, the hardware problems of the mobile phone can also cause the phone to restart, and the SIM card error is a common hardware problem. Change a SIM card to the phone and see if there is a reboot to determine whether it is a SIM card problem.

    6) Phone battery contact issues.

    Poor contact of the mobile phone battery will also cause the mobile phone to automatically restart, and you can take it to the mobile phone repair office for consultation and help.

  2. Anonymous users2024-02-06

    Select Wipe Date in Recovery mode, and press the Home button and AFK button at the same time to enter Recovery mode (factory reset).

    Or it's flashing.

  3. Anonymous users2024-02-05

    Unplug the power supply from a new boot or go to the workshop.

  4. Anonymous users2024-02-04

    Unplug the battery plate and try it.

  5. Anonymous users2024-02-03

    If you are using a Huawei phone.

    Here are some things you can try:

    1. Some mobile phones have Zhiling keys, and the three buttons are the volume key, the power button and the Zhiling key from top to bottom. Please press the power button in the middle to turn on the machine, and press the Zhiling button to turn it on.

    2. Please check whether the power button is damaged, whether there are problems such as insensitive pressing.

    If the power button is damaged, bring your phone and receipt to a nearby Huawei Customer Service Center for repair.

    3. It may be that your phone is out of battery, please make sure your phone is in a state of sufficient power. When the phone runs out of battery and may not turn on immediately when you just plug in the charger, please use the standard charger to charge continuously for a period of time before trying to turn it on.

    4. If you press and hold the power button after charging and the screen and indicator still do not respond, bring your phone and invoice to a nearby Huawei Customer Service Center for maintenance. Note: If your phone can be turned on, it is recommended that you back up your data immediately.

  6. Anonymous users2024-02-02

    If the phone can't be turned on, charge it first to rule out the possibility of the phone running out of power. After charging, you can turn on the phone. If you still can't turn it on, consider the aging of the battery, the key fault, the motherboard is broken, etc., go to the mobile phone repair shop to check and repair.

  7. Anonymous users2024-02-01

    There are usually three reasons why the phone won't turn on, the phone is out of battery, over-flashing, or the battery is damaged. If the phone can't be turned on because the battery is too low, just charge, because of excessive flashing and can't turn on, just ** a matching mobile phone rom bag, battery damage caused by the phone can't turn on the battery can be replaced.

Related questions
12 answers2024-04-13

If you have manually disabled the launcher before, you can try to go to System Settings - Applications - All, find the deactivated software, and enable it. In addition, the program of system protection usually cannot be deactivated directly, and can be reactivated by restarting the phone. If you want to disable the software through a third-party system management software, it is recommended to start it on the corresponding software. >>>More

6 answers2024-04-13

Specifics??

The fan doesn't turn because your power supply is not plugged in. >>>More

11 answers2024-04-13

First of all, go to search for the corresponding ROM according to the model, if you can't find it, use the flash master to find,** to the card, after that, when the indicator light is green when you turn on, press the "volume up button + power button", when the indicator light is green when you turn on, press "Volume up button + power button + home", use recovery to brush the ROM; Please back up your contacts, text messages, software, etc. The software is recommended to be backed up with flash master software; Copy the "OK ROM" to the memory card root; When the indicator light turns on green, press the "Volume Up Button" to enter recovery mode; Select [wipedata factoryreset] (wipe data to factory reset) and then select [yes--deletealluserdata] (yes--delete all user data); Go back to the main interface, select [wipecachepartition] and then select [yes--wipecache]. Go back to the main interface, select [InstallZipfromSDCARD] (select Update from SD card) and then select; [choosezipfromsdcard] (select the upgrade package from the SD card to update), and then select the ROM package you put in the memory card; Select Yes - Install; Wait for the flashing to be completed, return to the upper menu, and finally select [rebootsystemnow]-[no] (reboot system) The first flash restart is relatively long, please wait patiently, generally it will not take more than 10 minutes, "double clearing", "double wipe" and other nouns refer to the above steps. Under normal circumstances, the ROM package must be double-cleared, while the vast majority of others do not need to be double-cleared.

15 answers2024-04-13

Causes and solutions:

1. Viruses in mobile phones. >>>More

7 answers2024-04-13

Solution: 1. If the phone is automatically shut down due to insufficient power caused by excessive use of the mobile phone, and there is no response or cannot enter the desktop when it is turned on again, then it can be determined that the mobile phone battery has entered a dormant state due to excessive discharge. At this point, you need to remove the Redmi battery. >>>More