I can t get on the Internet when I reinstall my computer! Urgent help!!

Try this, universal network card driver, everything can be done if you have a network, and then you can update all the drivers when the time comes.

According to reports, the driver here supports XP and below systems, I don't know if it's suitable for you.

Use the U disk to ** a driver wizard (with a universal network driver),Go to your computer to install,Install the network card driver on the natural local connection,Then enter your sample IP address,So you can access the Internet。

Is your system reinstalled ghost?,Yes, it should be integrated with a network card driver.,Basically, there won't be a situation where the network card is not installed.。 Look at your computer's Device Manager to see if it detects the network card.

Get Started - Help & Support Center --- use tools to look at your computer and analyze the problem--- network diagnostics--- scan your system, and if the result is "failed", see where the error is, and then come back to find a solution.

Set the IP gateway mask.

No, uninstall the device and reinstall the NIC.

ping gateway ip -t

Let's see if I can get through.

I've had this issue as well.

Because the system can't detect that you have a network card.

It is a system error.

For example: the optical drive cannot be found, the hard disk has few partitions, etc.

Workaround: You change to a different system version.

Guess you're using a ghost system.

You can change to a ghost, or just find a disk to install.

This method is enough for your machine to function properly.

Check whether the NIC driver is fully installed.

To install the correct network card driver!!

Reinstall the network card driver and give it a try...

In general, you need to create your own local connection for ordinary home broadband! You will need a username and password from your network provider (Telecom, Netcom or Tietong, etc.)!! There must be one. If you forgot or can't find it, then call the network provider's customer service** to ask.

The easiest way to establish a connection: Right-click on Internet Explorer - Properties. Then select item 5 "Connection" and then "Establish Connection".

After that, select "Connect to the Internet - Manually set up my connection - Require a username and password for a broadband connection to connect". The name "ISP" is arbitrary, this is the name of your connection. Next, fill in your username and password here, which needs to be confirmed once.

The last step is to tick "Add a shortcut to this connection on my desktop" and click "Done".

When you go back to your desktop, you can see that the broadband connection is already set up and ready to go.

Title!! Answer: Your network card is scrapped, get an independent network card to install it. My network card used to be the same.

You should install the motherboard driver first, and then install the network card driver, or say, your network card driver model is incorrect.

Please check if the network card is plugged in.

In this case, it should be a virus or Trojan horse when installing browser plug-ins, boot into safe mode, take the latest Kaba to kill it, and maybe use the latest Rising to kill, because some new domestic viruses and foreign virus databases are relatively lagging behind; Then we recommend an "Ice Blade" software, which can find hidden processes and services, and if you are careful, you can find out the thread of the virus.

And if that doesn't work? Then take a portable hard drive to back up useful files, and then format the whole disk and reinstall the system, still can't you? Forehead... Just look for customer service. It's not good to find customer service, just change it, anyway, it's much cheaper now.

I've also encountered problems with your computer.

But the situation may not be the same, mine is because I have a virus.

Then there are several scenarios.

1.It may be that the keyboard is broken, or there is a problem with compatibility, the solution: change a set of mouse and keyboard or the PS2 interface is aging and short-circuited, the solution:

Take the motherboard to repair 3It is a virus in the computer, causing the system to get out of control, the solution: format all the hard disks, install the system from the new, do not use the dog disk.

Hope it helps.

The virus in the hard drive is too serious, it is recommended that you reformat the hard drive and try to install the system again.

Hardware issues! Check whether there is any problem with the memory and graphics card, if not, then it may be a problem with the hard disk. There should be a disk bad sector, and it happens to be in the sector where the C drive is located. Find a disc with bad sector repair software and repair the entire disk.

There is an alarm when the boot is turned on, which can prove to be a hardware problem! You are restless keyboard to try! If it's normal, it's your keyboard that's broken!

If you still call the police, I'm sorry to take a look at your BIOS! After shutting down the computer, give the BIOS battery to K! Then put it on!

I think the problem will be solved!

There's a problem with the keyboard.,I've been like this before.,Reinstalled the system a few times.,Still can't be used.,The address bar and favorites keep flashing.,Typing a word to copy a lot.,Finally, the keyboard is pulled.,Everything is normal.,Change a new one.,It's OK.,It is recommended that you also change a new one.。

I'm guessing your keyboard is broken... Do you unplug the keyboard and try the symptoms above???

If yes, you can change the keyboard. The keyboard is in the water.

First of all, from the software,Reinstall the word·Pay attention to the one in front to delete the clean,2,If you reinstall,It's still not good.,Just look at the keyboard if there is any keyboard pressed or shortcut key settings。

If it still doesn't work, there is no way... Turn off the computer and put it in the fridge and let this guy cool down, hehe.

There is a problem with your keyboard!! Stand up and knock hard!

If you can't change it, take a look! If not, you can unplug the keyboard and turn it on to see if it's normal!! You can tell if it's a keyboard problem!

Poor contact inside this keyboard,Keep pressing the key,Turn on definitely alarm,It also affects normal use。 Take it to the computer repair office to disassemble the keyboard and check it before installing it, whether the problem is solved, and if it is not solved, it means that there is a problem with the hardware. Inspection and repair...

To sum up, the keyboard problem Once I ate spicy hot and sprinkled it on the keyboard, it is very similar to the situation you said, change the keyboard.

There's a problem with the keyboard, try the simplest test, open the clipboard, use the keyboard, and keep pressing it from the beginning to see if it can be used, and you will know that it may be that Su Huang of the key did not pop up.

Quick Copy in Word and Open the address bar in IE are just the "F4" key.

See if your keyboard's "F4" key is sticky or has a problem with the contact.

First: see if there is a problem with the keyboard.

Second: Hard drive formatting.

It may be a problem with your system settings, try another system.

I guess there's something wrong with the keyboard. There may have been a few keys pressed all the time.

This is obviously a problem with this keyboard.,See if the keyboard is stuck.,Or has it been in the water?

The keyboard is flooded or the CRTL+V keys are stuck, so it keeps copying.

Let's take a look at it in safe mode.

No, it is recommended to deal with it in its entirety (e.g., repartitioning).

Grid test on it, c, d, e, f full grid and then use the installation version of the system installation, you can,

Enter this** to see if it helps

1. Broadband expiration.

2. If the router is broken and not installed, skip this paragraph.

3. The network card driver is broken, or the network card is broken.

The question is too general ...

What I can think of:

1. Is there a connection to the network?

Second, the network cable is broken.

3. Is the network card in the motherboard broken or the network card driver is not installed?

Fourth, the broadband network is disconnected.

5. Whether there is a broadband connection installed in the computer.

Sixth, if connected through the cat, see if the cat is broken (if the telecom cat is on the first 4 lights, flash or not).

7. If it is a router, check if the router is connected to the power supply, or check whether the router is turned off, or the router is disabled by others.

The telecom network calls 10000 and requests one-click repair or door-to-door repair.

What is the specific problem, whether you can access the Internet or not depends on what the specific situation is there.

Three possibilities:

1.Power issues. Measure whether the voltage of your household electricity reaches 220V.

2.System issues. It is recommended to install the original VLK operating system. Manually install the driver yourself.

Battery lack of power (this problem does not exist if the boot blue screen or black screen occurs after it is a BIOS self-test).

There may be a problem with the power supply, you can change the power supply and try it.

You can try to root the memory, and if it's still the same, it's a motherboard issue.

Now a lot of deep ghost is pirated Only this last version I don't know if you're using it, it's estimated that you're using a pirated system that causes this kind of problem to occur Install a separate system (I recommend using the selection version of the radish system is good).

It looks like the driver is not installed, right?

1. All four possibilities, 1. Disc problem: It is possible that the quality of the disc you use is not in place, the production technology is not in place, so the production process is not fully compliant, and the non-native data error, excessive reading and writing aging, surface scratches, etc., may cause data reading errors. Try again with a different plate.

2. Optical drive compatibility problem: No matter what brand of optical drive there is a certain compatibility, and there is poor compatibility with discs of specific materials or burning methods, so try to change the disc for this problem. If it doesn't work, change the optical drive.

3. Hard disk error, you can try to use some tools and software to detect the hard disk to see if there are physical or logical errors, logical errors can be tried to repair, or formatted.

4. Memory problem: It may be a problem with the machine's memory that causes dyslexia. Or the memory is full, you can consider the memory problem after ruling out the above three possibilities. You can use the alternative elimination method to test it yourself or find someone from a professional point to help you.

There are two scenarios in which the Windows System32 Config System file is missing or corrupted.

1.There is a problem with the memory.

2.There is a problem with the hard drive.

You can listen to your hard drive to see if there is an abnormal sound when you install the system again.

Before you start to install the system, you can format the disk and try to format it under DOS.

Also you don't have to reinstall the system, lost files can be repaired by inserting the disc.

You can change to another system disk to install it, if the display disk is still damaged, then please send it to the repair shop and replace the hard disk. Or see if they can fix your hard drive.

Find a new system disk to install.,Don't use the kind of quick installation.。

Check the hard drive, if it's no problem, it's just that the optical drive can't read the data.

It's that there is a problem with your system installation disk, try another disk.