The question of GUNPLA pen, what does GUNPLA mean by lining

The pencil is only to hook the surface of the model, so as long as the model is installed, you can draw the line. After putting together, there are textures in some places of the model, and it is good to hook in that kind of place

And if the line is drawn, it is OK to wipe it with your fingers when it is not dry Because the place where the line is drawn is in the place of the concave line, the wiping will basically not erase the main line

And if it dries, you can't wash it off even if you wash it with water, and you can't erase the lines with your fingers

Hooks are easy to go out of bounds. It's okay, erase it off with an eraser when it's dry.

No, it won't! If it's the kind for Gundam! It's oily! After drying! As long as your hands are wet, they won't fall off! You can also use an eraser or paper to wipe off excess paint when it's not dry!

The basic technique of making a GUNPLA is to outline the grooves on the model with a fine brush for drawing lines to make the model more three-dimensional and realistic. Each GUNPLA has grooves on it, and drawing lines with a pencil in these grooves deepens the color of the grooves and gives them a three-dimensional look.

Sketching is the use of a pencil to draw an outline on the surface of the model, which has the advantage of increasing the three-dimensional sense of the model. In particular, the effect of taking a photo, the outlined and unoutlined lines are two completely different effects. To give you a comparison chart:

The before and after effects of this Gundam OYW hook are really noticeable.

Anyone who has ever built a Gundam will know that every GUNPLA will have grooves on it, and the line is drawn with a pencil in these grooves to deepen the color of these grooves and make them more three-dimensional.

It is to draw lines in some grooves to make it more three-dimensional.

When you have just finished hooking the line, you can erase it with an eraser; After a long time, it can be wiped off with alcohol.

Here's how the eraser works:

The principle of friction, the eraser is relatively soft and rough, and when wiping, it can fully contact with the handwriting of the paper and wipe the handwriting off the paper. At the same time, the rubber of the eraser has a strong adhesion ability and can stick to the handwriting of the pen.

Here's how alcohol can wipe it off:

The pigment of the gundam pencil is an organic pigment, and the alcohol is an organic substance that can be dissolved.

Nonsense, you have to use a line to draw a line, also known as a bleeding pen, which can increase the sense of three-dimensionality, and the marker pen is about 10 pieces.

?Needle pens, pens or direct computer online can be used.

Mainly markers, a lot of colors, including metallic. Pigments are water-based and oil-based in nature. The use is divided into weathering, seepage, hooking, and realistic texture.

There are also pen with earth effect and snow effect.

There are also pens designed to wipe away excess paint.

Of course, face reading pens, flat pens, scribes, etc. can also be regarded as pens ......

Markers for painting, containing alcohol, are mainly used for partial painting, metallic colors, ordinary colors, and are available.

Markers are used for bleeding threads, which are divided into watery and oily ones, and are mainly used to infiltrate threads to enhance the sense of realism. The water-based ones can be wiped off with a cotton swab, and the oily ones can be wiped off with an eraser.

Marking pen (engraving chisel, model scribing needle), a small tool for engraving line.

Face brush, an extremely thin brush, is used to bleed lines.

Spray pen, spray pigment, suitable for large-area painting, ** more expensive.

n variety、Novices use a marker pen to paint and color、Go to 78dm to see that。

What pen? Is it used for coloring?

I'm here to give my opinion

1. The brush hair generally will not be scattered, unless you draw very hard, and the scattered flowers don't seem to have anything to get it up again, so be careful when drawing lines. If you draw a trace out of bounds, just use an eraser to erase it.

2. It is generally a black hook. Unless you want to do a special effect, such as a rift before a unicorn bursts its armor. The acrylic ones can be hooked, but not painted anyway.

3. The paint solvent used for paint can be wiped off. Wipe it off with a cotton swab. Don't get too much of it, though. This stuff corrodes plastic.

The above personal opinion.

Use a professional marker pen that will not scatter the line **10 yuan a spill out with a toothpick to tick off the line little by little Eraser, don't think about it.

If it dries, the oily should be washed with medical alcohol and water-based water.

The pen is a flat-headed pen and a face written test, and it is best to have a few more numbers, and the size must be there.

Paint depends on what effect you are going to do, if you want to do military style, you can buy a military color suit, otherwise you are recommended to buy the basic color at the beginning, red, yellow, blue, green, black and white These colors are necessary, and the other colors depend on your color mixing work, just find a color wheel for art to tune. Other metallic and transparent colors can be slowed down first.

I don't know if you're going to buy nitro paint or water-based paint, if it's nitro paint, because the paint itself is solid enough, so matting is not very necessary, of course, it depends on whether you want to make a gloss or matting effect, if you want to matte, then definitely matting paint can not be less. If you are going to buy water-based paint, then varnish or matting paint is a must. Because the adhesion of water-based paint is not very strong.

Be sure to apply a layer of matting as protection.

Practicing hands recommend MG's Zagu, the quality of the kit itself is very good, and it is relatively simple, there are many large curved surfaces on the body, suitable for you to practice.

In addition, it is recommended that you buy water spray cans and oil paints, if you want to use nitro paint, you also need nitro solvents, pay attention to the point to buy GSI, Gaia's special solvents, if you want to buy cheap banana water or ethyl acetate, building materials market to buy a large barrel of your life is not exhausted. Oil paints are used for aging and staining. Correspondingly, you also need a solvent for oil paints, zippo oil, don't buy turpentine.

In addition, you also need that kind of bamboo stick clip, otherwise you will not be able to color and dry.

That's basically it, and the rest depends on your needs.

I think you can just matt it, and if you put it on matting, the texture of the plastic will be much less, and then buy a little marker, or paint the model to paint a little bit of simple detail, and I recommend not drawing a large area.