-
Anonymous users2024-02-08The results are varied, and many of them are all wrong.
No nonsense, for win7
Reboot into the BIOS, and the logo will come out directlyf1, a lot of people are wrong.
Go to the BIOS
Go to the BIOS page.
Select left and right to enter the config page.
Trackpoint: Don't touch the trackpad to disabled<>
Finally, select the last option to save.
Official website driver,Some computers have problems with installation,Display signature abnormal,Mouse can be used after installation,Touchpad and keyboard are abnormal,Unusable,Maybe some models and systems can be used。 It is not recommended to reinstall the driver.
-
Anonymous users2024-02-07How to turn off the touchpad:
Method 1: It is to use the shortcut on the keyboard to close the touchpad, most computers have a small rectangular box on the F9, and use a line below to divide it into two boxes, one large and one small, and finally the whole large box is crossed out with a small symbol with a diagonal line, press the fn+ button with this symbol to close the touchpad. There are also some computers listed on the F8 or others, and some of them need to be manually turned off by themselves if they don't have this one.
Method 2: Open the control panel, because the touchpad controls the mouse, so find the mouse option in the control panel and click the mouse.
In the open mouse properties, there is a device setting value option, select the device settings column, find a touchpad, disable it.
Once the disabling is successful, tap on the app and you'll find that the touchpad is no longer working.
If you want to turn it on, click on it, and click on the app directly after the activation is successful.
-
Anonymous users2024-02-061. First of all, open the control panel, find the "mouse" option in the control panel, and click to open it.
2. Then in the pop-up mouse attribute window, click to open the "device setting", < 3, and then in the pop-up device setting value page, click "Disable" below, and you can disable the touchpad after the press enter is confirmed.
4. If you want to re-open the template function, go to the device setting value page, click "Xiaopei Start", and press Enter to confirm that you can use the touchpad.
-
Anonymous users2024-02-05The specific steps are as follows:
<>3. You can see that "Hardware and Sound" contains a lot of content, find the "Mouse" option in the row below the "Devices and Printers" category at the top, and click the left mouse button, as shown in the figure.
<>5. Conduct testing, and proceed to the next step after the detection is completed.
6. Open the mouse properties panel again, and you will find that on the far right side of the menu, there is an additional menu, showing "thinkpad".
7. Click on the "Thinkpad" menu, there is a checkbox under the black box on the left, and the words "Touch" are displayed after it, and the problem can be solved by removing the checkbox.
-
Anonymous users2024-02-04<>2. After the installation of the second step is completed, click to open the control panel page, select the mouse option and click to enter.
3. Step 3, then you need to click on the ThinkPad option at the top of the mouse properties page.
4. Fourth, under the ThinkPad page, click the drop-down arrow on the right side of the ClickAdvisory, and select the only trackpoint option.
-
Anonymous users2024-02-031. First open the control panel, find the "Mouse" option in the control panel, and click to open it.
2. Then in the pop-up mouse attribute window, click to open the "device setting", 3. Then in the pop-up device setting value page, click "Disable" below, and you can disable the touchpad after the press enter is confirmed.
4. If you want to re-open the template function, go to the device setting value page, click "Start", and press Enter to confirm that you can use the touchpad.
-
Anonymous users2024-02-02There are 3 main ways to turn off the touch control pad:
1. Press the fn key of the keyboard and press F6 or other function keys (the function keys of different notebooks are different, always one of F1-F12) to temporarily turn off the touch simulation mouse function of the touchpad. The indicator icon on the key is generally shown in the following figure:
When you press the function combination, it can remain off until the operating system restarts, and you only need to press the combination function again if you need to temporarily re-enable the touchpad function. When the system is restarted, the touchpad function is still turned on by default, and you need to do the above operation again to continue to temporarily disable the function.
A laptop is shown below: the FN+F6 function key is to turn off the touchpad.
2. Unloading permanent shutdown. That is, it can be disabled directly in Device Manager by uninstalling the touchpad driver.
Right-click on "Computer" (or "My Computer") and select "Manage" to find "Device Manager", "Mouse & Other Pointing Devices", and find the device that belongs to the touchpad, for example.
synaptics ps/2 port
touchpad", right-click on it, and click "Uninstall". The downside of this approach is that if you need to use the touchpad function again in the future, you have to find a way to reinstall the driver correctly.
3. Lenovo brand laptops can first find the one marked "Touchpad" and have a key, and then press the above method to turn off or open the "Touchpad", which is also on the F1-F12 key.
-
Anonymous users2024-02-01Method 1: Uninstall the touchpad driver;
Method 2: Press the FN key + the key combination in the F function key that represents the touchpad.
-
Anonymous users2024-01-31Control Panel - Services & Programs - Services, find the corresponding service - Close, or speed up the startup item through 360 optimization, and change it to prohibit startup.
-
Anonymous users2024-01-301. The easiest way is to use the keyboard shortcut key to turn off the touchpad, just press "F9+FN". Some are F8, which depends on the computer.
2. Manual setting. Open the Control Panel in the Start Menu and find and double-click on the "Mouse" option;
3. Switch to the "Device Settings" tab in the open mouse window, and then click the "Disable" button;
4. After the disabling is successful, click "OK", and then click Apply, and the touchpad will not be available.
5. If you want to open it again, you can click "Enable", and click on the application after successful enablement.
-
Anonymous users2024-01-29Method: 1. You need to enter the control panel settings, which can be entered from the computer or from the start program
2. Find the "Mouse" option in the control panel and click on it
3. In the mouse properties, click to open the rightmost "Device Settings":
4. Then click on the enabled device to set it to "Disable":
5. There are warning points to determine:
6. Then you will find that the trackpad is no longer useful, indicating that it is closed. Remember to click the "OK" button after setting it again, otherwise it's only temporary:
IBMT42 series has always been widely loved by consumers,In recent years, the "black friends" who have paid attention to IBM know it,Whether it's T40 (detailed configuration multi-picture appreciation and participation in comments)、T41 (detailed configuration multi-picture appreciation and participation in comments) or T42 are all models with the end code name "P" as the flagship model of its series, especially T42P, which uses Dothan's processor so that everyone finally sees IBM's willingness to adopt ultra-high-end configuration! The picture shows IBM ThinkPad T42 But that's the problem, the previous T40P and T41P have become the most high-configuration models in its series, whether it is the screen, hard disk (7200 rpm) or graphics card performance, etc., so that it undoubtedly establishes its own "boss" prestige, but the new platform model (Sonoma) is being hyped to boil today, IBM unusually launched a model with a configuration greater than or equal to T42P T42 M6C, I don't know if this is in" Shoot yourself in the foot"? Side** IBM T42 M6C Although it does not have a device with the new Sonoma platform, it also uses a fairly high configuration: >>>More
I've been selling IBM computers for many years.,To be honest,No matter how good the notebook is, you can't play large-scale 3D games.,If you don't believe it.,You use T61 to run a Crysis Crisis.,The minimum effect may be OK.,The special effects are over as soon as they are opened.,But if it's used for work or study,T61 is enough.,Professional drawing has to be T61P.,Here's an explanation.,T61P's professional graphics card is not better than the general T61.,It's just better than T61 for professional use.,So buy T61 on the line, There is no need to spend a few thousand yuan more, the current T61 port line is about 8000, and the T61P is about 13000-14000.
In terms of aspects, the T42 uses a CPU with Dothan core, a bus of 400Hz, and an L2 cache of 2MB; The T41 uses a Banasi core CPU, a bus of 400Hz, and an L2 cache of 1MBThe former performs better. >>>More
The P76 is cost-effective.
8G 599, there is no problem with the configuration to meet your needs, the key is that the battery life of the P76 is very powerful. >>>More
Hello, this shows that the Baojun 730 uses a self-priming engine with a displacement, and it is the lowest configuration model, that is, the cheapest model.