I can t boot the system after installing the system with M2 SSD 100

Restore the original hard disk system to the SSD with ghost backup.

on (first divide the area) and put the mechanical hard disk.

The primary partition is converted to a logical partition so that it can be used without drive letter confusion.

Interface. It's an SSD, and it's the fastest SSD out there. The interface is the second-generation mSATA interface, which used to be called NGFF and is now uniformly called.

The bandwidth of the interface is 10Gbs or 32Gbs, which is much more than the 6Gbs of SATA3. It is the hard disk transmission interface with the largest bandwidth at present.

interface, from Intel.

The 9 series motherboards have only begun to be natively supported, therefore, it is a relatively new interface, the motherboards supported are relatively few, and ** is much more expensive than the SATA3 SSD, so it is not common.

From beginning to end,First of all, you have to make a USB flash drive that supports UEFI startup,There are a lot of support for this on the Internet,It is recommended to use the depth,Then to the official next win10 image file to put it in,Pure。 Second, after doing a good U disk, enter the BLOS first boot the U disk, enter the deep microsystem, open the wizard partition, and pay attention to the best to make M2 into GPT format. Because the motherboard is very new, now the new motherboard supports UEFI and Legacy boot options.

UEFI is suitable for new machine boot corresponding to the hard disk is GPT, the old machine is honest and practical Legacy boot, the hard disk is MBRAfter setting it up, go to blos Pay attention to the boot mode set to UEFI boot, because you have already set the hard disk to GPT, and then set the boot item to the first one for your USB flash drive, the one with the UEFI headmarker, and the second one for your M2 is also the UEFI headmarker. Otherwise, it can't be installed.

Save auto-restart. Enter the deepin microsystem, then open my computer, U disk, find the ** win10 image file, load it directly. It's very pure, and the browser and antivirus don't get it**.

This is due to the fact that you made the system boot partition not installed on the M2 SSD, repair the boot partition under it.

Which mode you choose when formatting the disk, if you choose the wrong one, it may not start.

uefi+gpt（guid），legency+mbr

The solid state of the interface. If it's a PCIe channel,You can't install win7。

Use the pure installation version of the win10 system to install it. Be sure to use the installed version.

When using the partition tool, please change the format to guide, which is MBR by default

There are several reasons why the M2 SSD cannot enter the system after installation:

1. The SSD is not set as the first boot disk: After cloning the system to the SSD, if you can't enter the system when you start the computer, you may have forgotten to change the boot order. In this case, simply go to the BIOS and change the boot order so that the computer starts up from the SSD.

2. The hard disk partition mode does not match the boot mode: there are two types of hard disk partition formats: MBR and GPT. The boot mode of the MBR format should be Legacy; The boot mode corresponding to GPT is UEFI.

If the hard drive partition mode does not match the boot mode, the system will not boot. You also need to go into the BIOS and set the correct boot mode according to the hard disk partition.

3. The main partition is not set to the active partition: the active partition in the hard disk is the main partition, and the boot files of the computer operating system are all in the main partition, and they are all started from this partition when the computer is started. If you do not set the system partition as the active partition, you cannot enter the system, and you can modify the active partition from the command line.

4. A black screen appears after starting the computer: the computer will read the boot from the MBR DBR hard disk when it is booted, if the boot is damaged, the computer may be turned on with a black screen and cannot enter the system.

5. Error code is displayed after starting the computer: The error code is displayed 0xc000000f it may be due to the damage or loss of BCD files. BCD is a database of configuration options and is used when bootstrapping configuration.

If you can't find your BCD when you start your computer, you won't be able to access the system. <>

1. Enter the Windows PE system, check what partition mode your computer's hard disk partition is used, generally reinstall Windows 10 or Windows 8 system will use GPT partition, and the corresponding BIOS boot mode is UEFI. Reinstalling Windows 7 and XP systems uses the MBR partition and BIOS legacy mode. 2. After booting, quickly press ESC, F2, F12 and other shortcut keys to enter the BIOS, and in the BIOS, you can switch the boot type of the computer motherboard in the boot option.

Please select the corresponding BIOS boot mode according to the type of partition on your computer's hard drive. 3. Generally, there is a secure boot in the BIOS, it is recommended to disable it directly to avoid detecting the Windows system and causing the computer to fail to boot. Of course, there are some users because the system has not been installed successfully, or they are using a ghost system image, generally this kind of recommendation is that you **Xiaobai one-click reinstall the system software, which provides the official original Windows system, which can basically be installed directly.

Summary. Hello dear, the specific solutions to the M2 hard disk that cannot boot after installing the system are as follows: 1. U disk start. 2. On the U disk startup page, select Wait for PE to load.

4. After entering PE, partition and format the solid state. 5. Use the system installation tool to install the system. Precautions: If the system is installed normally, there will also be a shortage of power supply, and the power supply needs to be checked.

Hello dear, the specific solution of the M2 hard disk that cannot boot the boot after installing the system is as follows: 1. U disk startup. 2. On the U disk startup page, select Wait for PE to load. 4. After entering PE, partition and format the solid state.

5. Use the system installation tool to install the system. Precautions: If the system is installed normally, there will also be a shortage of power supply or electricity, and Qi Xin needs to check the power supply.

After installing the M2 hard disk, you need to set it as the priority boot disk. At present, the installation of the operating system is generally installed by the U disk, and then the U disk cover is used to install the operating system, and the hard disk with the active partition should be set as the priority boot disk in the BIOS, so as to ensure that after the reboot, the computer first enters the hard disk with the operating system.

For new SSDs, partitioning and formatting are required before installing the system, and then the system is installed.