Is the display board of Siemens washing machine broken by an instantaneous short circuit?

The display board of Siemens washing machines is short-circuited instantaneously, usually the circuit inside the display board is faulty. Please check the current display status and the connection of the power supply.

If there is a short circuit in the washing machine, it must be a problem with the quality of the washing machine, and you should apply for after-sales service to deal with it before you can continue to use it.

In general, the power strip is of poor quality, the wire diameter is thin, and it burns out as soon as it is short-circuited. The reason for the short circuit is that there is a short circuit inside the Siemens washing machine itself, and the second is that when the plug-in board is inserted into the plug of the washing machine, the jack spring piece touches the short circuit and causes the lead to burn, which also reflects the poor quality of the plug-in board from the side. In addition, a short circuit will only have an impact on the wiring and will have no effect on other electrical appliances.

The display board of the Siemens washing machine was short-circuited instantly, it should be the place where the circuit board inside has a short circuit, it is recommended to repair it, otherwise the circuit board may be burned out.

It is estimated that the circuit board is too close to the water outlet, and the circuit board is easily damp and the resistance is broken down. Last year, it was also bad after the warranty period, and the after-sales people said to replace the motherboard, 800, qnmmp. Then I found a company on ** to repair the motherboard, which is to change the resistor.

Buy a professional screwdriver and send the motherboard back and forth postage plus repair costs for a total of 90 to get it. The Bosch double-door refrigerator I bought last week in 2012 was also broken, and the motor was broken after the sale, Lord.

If the washing machine display board is short-circuited instantly, if it can still be turned on, it is not broken at that time, if it can't be turned on, it means that it is really short-circuited, and then your power strip is burned out.

If the display board of the Siemens washing machine is short-circuited instantly, it must be broken, then it has burned out, and you need to replace it.

The short circuit is not bad, it may be which wire connection the original wiring diagram is not very good, or it is produced for a short time.

If there is a short circuit in an instant, a large current will be generated, and the wiring inside will definitely be burned out.

Hello, if the display board of this washing machine is short-circuited, it is broken, and it needs to be repaired, and it is safer to repair it and use it again.

The display board of the washing machine is short-circuited instantly, which is equivalent to a breakdown, and the short-circuited line can be reconnected.

The instantaneous short circuit of the display board of your washing machine will cause overcurrent protection and retention plate will cause damage to the mellow plate, and the short circuit of strict short circuit will cause protection action and cause fracture.

In the event of a momentary short circuit, the resistor will be damaged, and in this case, it is its self-protection mechanism, so this situation has already broken the hand.

If you say that the washing machine of Siemens, if the display board is short-circuited instantly, this is indeed broken, and you can go and replace it with a new washing machine.

This kind of shallow wire board is short-circuited. It means that it is broken, and you should find an electrician to fix it quickly.

They know that if there is a short circuit in this washing machine, if this motherboard has this problem, it may be that the motherboard must be scrapped, because basically the motherboard must be soldered before it can be done.

Hello friends, that's broken. Siemens accessories are expensive.

Whether the display board of the Siemens washing machine is broken in an instant, it should be that the circuit board is broken and needs to be replaced.

The key is on behalf of the roller door locked... You open a box in the lower right corner of the machine to see if there is a buckle or something like that that can be forced to unlock.

Then take the clothes out and look at them again.

If not, hit after-sales service**.

Many things are not difficult to operate on the spot, and it is not easy to explain them here.

The display board of the Siemens washing machine was short-circuited instantly, is it broken? In fact, the Simonzi washing machine display board can't be reminded by an instant short circuit, and he is not bad if it is broken.

The display board of Siemens washing machine is short-circuited instantly, and an activity is broken, which may have a great impact on the machine, so this should still need to be repaired.

It is recommended to find a manufacturer to repair the leakage of the washing machine mainly because there is no grounding wire, there will be some induction electricity, the reason is that there is distributed capacitance between these components such as motors, transformers and the chassis, the value of distributed capacitance is not large, AC power can pass through these capacitors, and then because of quality problems, it is connected to the radiator and tripped, indicating that the grounding on the radiator is effective, and the advantage of the washing machine is that it trips, the washing machine is generally a plastic shell, and the socket is three-phase, and there is grounding (if it is tripped because of grounding, It shouldn't be).

It is likely that there is a problem with the motor wiring in the washing machine.

Siemens washing machine leakage, first check whether the computer board of the washing machine is wet, or if it is entered by water droplets, check whether the motor circuit below is damaged or damp, and check whether the grounding wire of the washing machine is firm.

There are still many reasons for the leakage of the washing machine, 1: the insulation of the power supply lead is damaged, the bare conductor touches the metal shell, especially pay attention to the motor outlet wire touching the end cover. At this time, the insulation should be taken care of, and the power leads should be replaced if necessary.

2.The motor windings meet the end cover. At this time, as long as the insulating paper is paddled at the contact place, it can be tied.

If you find that the washing machine is leaking, it means that there are wires connecting to the shell inside. In this case, it is best for us not to be blind ourselves, and directly take home appliances to repair them and let them find them, so that they can eliminate potential safety hazards in time.

Siemens washing machines have leakage problems, which are caused by the decrease or damage of the insulation resistance of the circuit or electrical insulation of the washing machine, and should be stopped immediately for safety reasons. It is recommended to contact the after-sales service department of Siemens washing machine according to the model and brand of the washing machine, repair and check the circuit system of the washing machine, and eliminate potential safety hazards before use.

Don't use the Siemens washing machine if it leaks for the time being, and report for repair after after-sales service. Safety first.

Hello, if there is leakage, we can directly find the manufacturer for maintenance, or ask them to do after-sales service.

If your Siemens washing machine is leaking, then you should ask a professional maintenance staff to help you find the cause of the leakage, and then you must not use it again, otherwise it will be very easy to cause a dangerous situation. Don't try to repair it yourself, often without professional knowledge, you can't solve the actual problem.

If it is an induction leakage, connect the ground wire and get it right away. If it is a line leakage, the warranty period will be sent to the designated maintenance point free of charge. Out of the warranty, call the master to repair.

If you have professional knowledge and hands-on ability to disassemble the washing machine for inspection, it is best to find a professional technician to disassemble the machine and check the circuit.

Three sockets are indispensable, and there is no shortage of ground wires. If there is no ground wire, then you can fix the washing machine, and there is no better way.

It is probably because your washing machine is too wet, or it has entered the water, and the humid environment has not dried, so you can take it out to dry, or take it apart to dry.

If you understand electricity, you can take it apart to check the leakage, if you don't understand, then find the staff of the repair shop.

Check the insulation of the electrical device and troubleshoot the fault. To see if the capacitor is damaged, replace the capacitor. Is the ground wire connected incorrectly?

If the electricity leaks, you first turn off the power supply at home to ensure that you don't get electricity, and then find the washing machine after sales to see what the problem is to repair.

Siemens leakage should first call customer service**, and then deal with it, and then go to the maintenance of a special Siemens service point.

Don't use it yet, unplug the electrical socket first. Then go to the after-sales service and ask them to solve this problem, it is recommended not to use it.

You can call ** to call a special person to come to repair.

At this time, you don't want to use the washing machine for your own safety.

It is recommended that you do not use it in advance for the time being, and then you find an after-sales one to repair it for you, and then you can use it later.

Brother, you have to find the relevant repair department to take a look, what is the problem? Are you still ** wrong? And then to solve it.

You can find a professional and regular maintenance personnel to come to check it, and it is recommended to buy a new one if you can't repair it.

Washing machine leakage quickly find the manufacturer to repair it, leakage is very dangerous, so hurry up to repair.

When the electricity leaks, don't touch it with your hands, it will be electrocuted. You can find the manufacturer to repair and return to the factory.

Summary. There are several reasons why Siemens washing machines do not work when powered on:

The washing machine power socket is not plugged in.

The program was not started correctly.

Under normal conditions when the power is on, there is no water ingress after it is turned on.

Some parts on the motherboard are broken.

Solution: Plug the power supply back and check whether it is a power supply problem.

Follow the steps to start the program normally.

Check that the faucet is on.

Eliminate the above problems and contact after-sales for maintenance.

Siemens washing machine after a short circuit trips, and then power on does not work.

Hello, I am Magnum Teacher and I am happy to serve you! I will send you the information you need for the banquet, please wait a while, and I wish you a happy life with your relatives.

There are several reasons why the Siemens washing machine does not work when it is powered on: the power socket of the washing machine is not plugged in. The program was not started correctly.

Under normal conditions when the power is on, there is no water ingress after it is turned on. The solution to the broken individual parts on the motherboard: repopulate the new plug and unplug the power supply to see if it is a power supply problem.

Follow the steps to start the program normally. Check if the faucet guess key flush is turned on. Eliminate the above problems and contact after-sales for maintenance.

If my answer is helpful to you, please give a like (comment in the lower left corner), click on Jian Meng's avatar to follow me, your efforts are very important to me to stop the bridge, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Hello, the washing machine is short-circuited and tripped, and then the power on indicator has power, but the washing machine button does not respond. What is the reason?

In fact, the laundry machine does not respond after powering on may be due to improper use by the user, so that the computer board filial piety file into the branch of the water or damp, causing the computer board to malfunction due to short circuit, as soon as the power is turned on, the reset coil of the power switch is instructed to cut.

Hello, the washing machine is halfway to washing clothes, the socket line is heating and tripping and the power is off. After the power is turned on again the next night, the display is rotten and there is electricity, but the washing machine has no response to the high button closure. What is the reason for this? Professional please.

In fact, the laundry machine does not respond after powering on may be due to improper use by the user, so that the computer board filial piety file into the branch of the water or damp, causing the computer board to malfunction due to short circuit, as soon as the power is turned on, the reset coil of the power switch is instructed to cut.

Hello dear, if the display panel of the Siemens drum washing machine appears to make the car stare at the error**, the following situations may occur:1The E01 door is not closed.

Check if the door lock is working properly and close the door. 2.E02 Water valve failure.

Check that the faucet is open, and if it is, try cleaning the faucet filter, or replacing the dirty water valve. 3.E03 Drainage failure.

Check if the drain is blocked, or if the drain pump has a sail problem. 4.E04 Electronic board short circuit fault.

The motherboard needs to be replaced. 5.E05 Motor Failure.

Check whether there is any abnormality in the motor and try to replace the motor. The above are some of the possible errors**, and the specific reasons need to be determined according to the specific situation. If you have no experience, it is recommended to ask professional after-sales maintenance personnel to carry out inspection and maintenance.

I have helped you find the results; The display board of the Siemens front-loading washing machine is broken, and this fault indicates that there is a problem with the communication between the control board and the motor, which may be caused by a faulty circuit board or a faulty motor. F02 Fault**This fault indicates a problem with the water level sensor, which may be caused by a failure of the water level sensor itself or a faulty control board. 3.

F03 Fault**This fault indicates that there is a problem with the motor drive circuit, which may be caused by a faulty motor or a faulty control board. 4.F04 Fault**This fault indicates that there is a problem with the water level sensor or water level switch, and the water level sensor or water level switch needs to be checked for fault.

5.F05 Fault**This fault indicates that there is a problem with the pump, and the pump needs to be checked to see if it is faulty. 6.

F06 Fault**This fault** indicates that there is a problem with the motor drive circuit and the motor needs to be checked for fault. 7.F07 Fault**This fault indicates that there is a communication problem between the control board and the display board, and the board needs to be checked for faults.

8.F08 Fault**This fault indicates that there is a communication problem between the control board and the motor, and the board or motor needs to be checked for fault. Hope mine helps you!