If you want to install a super dazzling strong light headlight, please give a suggestion from a modi

Updated on Car 2024-04-14
22 answers
  1. Anonymous users2024-02-07

    There are two ways, one of your headlights modified xenon lamps, generally run long distances on the high speed are the rules of the driver, will not play high beams at the legal distance when the car, once or twice a time can be, you say that every day is like this, that is illegal, it is dangerous for them, so reasoning can only be your current car lights are not bright enough to age or something, it is recommended that you modify xenon lamps for night cars to run long distances is very safe and affordable. Second, you install warning lights at the turn signal interface at the four corners.

  2. Anonymous users2024-02-06

    Then don't be so troublesome, there are luggage racks on the off-road vehicles, you just need to install a few on the luggage racks, and the police can't care about it, and then adjust the angle yourself, basically enough, it's best to install those with adjustable strength. But buddy advises you, it's best not to do this, if the other party turns on the high beam, you can slow down or stop, the brightness of the headlights is also regulated, and it can't cause blindness to people, the kind of light I said will make people blind for a short time, and something big will happen.

  3. Anonymous users2024-02-05

    Modified car lights are still quite good, and there are three types of car light modifications;

    1. Replace the bulb with a single bulb and directly replace the old bulb with a new bulb, the operation process is simple, and under normal circumstances, the owner can do it alone. However, this change not only has a limited effect, but also is prone to astigmatism, which is not beneficial to others and oneself. The reason for this phenomenon is that the original car parts do not match the new bulb, which causes the focus to deviate and cause astigmatism.

    Therefore, this modification is not recommended;

    2. Replace the headlight assembly, directly throw away the old headlight assembly, and replace it with a new headlight assembly, and the operation process is relatively simple. This upgrade method is mainly to make the headlights look more beautiful, because many manufacturers will add some cool angel eyes, devil eyes and other decorative lights in order to increase the selling point. But this is actually a test for the annual inspection, and the pass rate is not high.

    Moreover, most of the headlight assemblies are used in the auxiliary factory accessories, and the quality and performance are generally low, and the lighting effect is not significantly improved. Therefore, you can choose this method according to your preferences;

    3. Changing the xenon lamp bifocal lens in the service state is to replace the accessories in the headlamp assembly ruler with a new xenon lamp bulb, bifocal lens, stabilizer and other three main accessories, the operation process is more complicated, different models have different configurations, and the modification methods are also different. Of course, the lighting effect of the Ling noise after the change, is the best among the three modifications, after adding the bifocal lens, not only greatly improves the lighting brightness, irradiation distance, but also can achieve the combination of how close and far the effect. It can be said that the collocation is flexible and changeable, so that the choice of car owners is more abundant.

    Therefore, this modification is highly recommended.

    Millions of car purchase subsidies.

  4. Anonymous users2024-02-04

    First, it is not that the frequency of the bulb modified by the lamp is higher, the brighter the effect. Regardless of xenon lamp, LED lamp, the greater the power, the brighter it is. This is a big misunderstanding that many riders now generally believe, but it is not.

    In the modification of the lamp, there is no equal relationship between the power of the bulb and the brightness. The bulb power can only indicate that the consumption is large, whether it is installed in the lamp assembly is the best, this is not necessarily, some bulbs have a lot of power, but do not focus the light, the light effect is very poor, and it is also a waste.

    Secondly, many riders have heard from the tuning shop that the wire is not worth much. In fact, on the power line, as long as it is a slightly better wire, it will cost hundreds of dollars a bundle, and it is only 10 to 20 meters. There are also individual cars that need to strengthen the wire group, power cord, especially the conversion line, a few cheap pieces, dozens of hundreds, thousands, tens of thousands of dollars.

    And these so-called "worthless" wires do play a very important role in the light of the lights and the quality of the effect. It's like a good sports car, if you don't have a good road, how can you run fast?

    Finally, please figure out the significance of Chongqing car lamp modification? Change means to change, to change. Especially now that some cars are originally halogen bulbs of the original car, do we only have to replace the lights of the original car for such a car?

    Obviously this is not possible. Now the most commonly used modification method, in order to get a better lighting effect, usually the original car halogen bulb will be replaced with xenon lamp or LED lamp, which can be the same as the original car halogen light type is the best.

  5. Anonymous users2024-02-03

    1. The original car has a lens, but it is a halogen lamp, can it be directly equipped with a xenon lamp?

    The luminous principle of halogen lamp and xenon lamp is different, and the focus is also different, so directly replacing the halogen lamp with xenon lamp often does not get the desired effect. It is recommended to replace the special xenon lens and the special xenon lamp to make the effect more perfect.

    2. Will the xenon lamp be very dazzling after changing the lens?

    The lens is the development trend of automobile headlights, and the role of the lens is to standardize the light type, and focus on the limited brightness on the road surface, rather than shining everywhere like a reflector, so the lens headlights are not dazzling at all when they will car, and they look brighter and others are not dazzling.

    3. Will the effect of changing the lens xenon lamp on rainy and foggy days be inferior to that of halogen lamp?

    This issue has been described in many previous posts. The quality of penetration has nothing to do with whether it is a xenon lamp, xenon lamp also has a low color temperature value, the quality of penetration is only related to the color temperature value, the lower the color temperature, the better the penetration, and vice versa.

    4. Xenon lamps consume more electricity?

    On the contrary, it only needs 35 watts of current, compared to about 55 watts for ordinary car bulbs, which is nearly 1 times more than 1 time, and HID can reduce the burden on the vehicle's power system.

    5. Xenon lamp has a high price and short life?

    It does not use tungsten filament without the concern of being oxidized and burned, so it is very durable, its life is 5 times that of ordinary bulbs, and tungsten filament bulbs have 90% of the electrical energy converted into heat energy, the temperature is as high as 650 degrees, which will damage the surrounding plastic lamps and increase the cost of using the car, the temperature of HID is only 450 degrees, a difference of 200 degrees and is protected by quartz tubes, which greatly reduces the related losses.

  6. Anonymous users2024-02-02

    If you only change the lights and don't change the lenses, the lights will be very dazzling, which will make the driver of the opposite vehicle unable to see clearly, which is a safety hazard for you and others.

    Moreover, the xenon headlights without lenses have poor light concentration and are not ideal for the illumination of the road surface.

    Therefore, I suggest that it is best to add lenses to the xenon headlights, so as not to be scolded by no one on the road every day.

    The components of xenon headlights include xenon lamps, ballasts, lenses, connecting wires, and connecting wire interfaces. The sealing place should also be glued tightly to avoid water ingress.

  7. Anonymous users2024-02-01

    The necessary materials for the modified lamp are two bifocal lenses, two stabilizers (high-voltage packages), the bifocal lens brand is Bosch, and the ballast brand is Philips Dutch), and the bulb is Philips.

  8. Anonymous users2024-01-31

    Treat lack of quality as personality.

    Since driving, I have gradually found that there are many car owners who are extremely low-quality, and they will turn their high beams on when driving at nightAlthough it is convenient for them, it has a very serious impact on other vehicles, but this matter is not in the scope of these car owners' considerations, because they only need to use it comfortably.

    And some car owners even feel that the high beams that come with the vehicle itself are not enjoyable, so they go to modify the super bright high beamsAt the moment when the light comes out, once there is a car passing in front of you, the light will directly pierce the driver's eyes, at least within 5 or 6 seconds, the driver will not be able to see the road situation in front of you.

    If you do not avoid obstacles or other vehicles in time at this time, it is easy to cause major traffic accidents or chain traffic accidentsIf you want to change this problem, you must first change it from the basic quality of the owner. Be sure to educate car owners about the harm of always turning on the high beams.

    However, it is impossible for these people to reform themselves by quality education alone, so it is necessary to match some relatively strict policies, and after the excessive cost of crime, these people's consciousness will naturally be improvedIf there are no hard and fast rules to demand from them, they will only regard these quality education as a deaf ear.

    Or the maintenance lines that help them modify the super-bright high beams will be directly closed, so that they will not be able to operate for a period of time, so that the appearance of ultra-bright high beams can be fundamentally eliminated, after all, there is no market without buying and selling.

  9. Anonymous users2024-01-30

    Because they think it's handsome, they think it's very eye-catching, but a lot of people don't think so, and it's not only affecting other people's driving, it's also going to have a bad impact on themselves.

  10. Anonymous users2024-01-29

    Stinks, it seems that he is different from others, this is not only to himself but also to others irresponsible, the high beams are already very dazzling, passers-by have no time to dodge, change to super high beams, it is more likely to have accidents.

  11. Anonymous users2024-01-28

    Maybe it's just to seek their own so-called happiness, such a person doesn't care about the feelings of others, if it's for some other purpose, it's understandable, in short, I don't know the reason, and it's not good to make too many judgments.

  12. Anonymous users2024-01-27

    has no quality, no education, thinks it's very stylish, but in fact it's really unqualified, but he himself doesn't think so, and regards this as a thing that seems to be very proud.

  13. Anonymous users2024-01-26

    This kind of person is naïve in his thinking, and he likes to treat his own problems as personality, and I think the traffic police should treat this kind of person well.

  14. Anonymous users2024-01-25

    This kind of person with low emotional intelligence will not be a person, no one will feel good when the light is flickering, no one knows how to respect people at all, it seems to have no quality, and it may also affect traffic.

  15. Anonymous users2024-01-24

    In order to attract the attention of others, like to be maverick, similar to killing Matt. I think it's cool, but in fact, I just think that his brain is very normal and different from people.

  16. Anonymous users2024-01-23

    If it is convenient for oneself and affects others, the quality of the driver himself may not be high.

  17. Anonymous users2024-01-22

    Maybe it's because of their eye problems, some newcomers feel that they can't see the driving state of the vehicle in front of them, and turning up the light of their car can make them see clearly.

  18. Anonymous users2024-01-21

    What kind of xenon lamp should be changed to high beam? One is to have an impact on the opposite car, the other is to imitate the leakage fiber penetration of the high beam, rainy days or foggy days when the lights shine out and can not see the road at all, Xunkuan low beam to xenon lamp can, it is recommended that the landlord or change the low beam to xenon lamp, high beam to halogen lamp.

  19. Anonymous users2024-01-20

    Are you in **, do you want to change yourself, the most important thing is the lens and xenon lamp, the rest is some accessories, Beijing Bobo Chengxiang do Qi car lighting upgrade center, change the lamp products should be ready, all kinds of imported lenses domestic pure Youling lens, imported xenon lamps, domestic xenon lamps are all available, **fair.

  20. Anonymous users2024-01-19

    To put it simply, this is the case, and you can see more clearly when you drive with a lens, which is good for yourself and others.

  21. Anonymous users2024-01-18

    When it comes to changing the lights of the car, the first thing that comes to mind is the xenon lamp, but the friends who have changed the xenon lamp may know that after the change, the light is very bright from the outside of the car, and when you turn on the low beam, others think that you are driving the high beam, and it is easy to cause danger to the other party's friends when the car will be cared, but they can not see the road surface clearly in the car, what is the reason, because the xenon lamp is too astigmatism!!

    Henan Hongdeli car lamp to tell you a good modification method - modified bi-xenon headlights, the so-called bi-xenon headlights are modified xenon lamps to install a lens uniform light surface, than the original lamp brightness increased by 3-5 times, the low beam cutting line is clear, will not make the opposite vehicle cause line of sight interference, due to the presentation principle of the lens Qin guess makes the light irradiation range larger, brightness is more uniform, and through the lens dimming system to achieve the instantaneous switching of far and near light, no delay, to ensure driving safety. And because of the novel shape, the overall aesthetic of the vehicle is improved. At present, most of the imported vehicles and high-end models in the country will be equipped with bi-xenon lights, such as Mercedes-Benz, BMW, Audi, etc., if the general car wants to have such a can only go to the lamp shop for modification.

  22. Anonymous users2024-01-17

    Nowadays, many riders modify lights, and there are two general light change schemes:

    Plan 1: If it is delayed, replace the original car bulb and install xenon bulb (add xenon lamp, increase the power, and it is easy to burn the lamp).

    Plan 2: Xenon lamp, lens, and stabilizer are installed in a complete set (the whole set is replaced, the system is matched, and the cost is not high).

    Now xenon lamps, lenses, and ballasts are divided into domestic and imported, and the effect is not the same, and it is recommended to choose imported materials for changing the lamp, the quality is ***, and the effect is super good.

Related questions
7 answers2024-04-14

OK...

I'll give you the next steps: >>>More

8 answers2024-04-14

No, you can't. Telecom cats nowadays are all dedicated.

Now there are three access modes for telecom broadband, the first is the access mode of ** line, which is pppoe dial-up. >>>More

7 answers2024-04-14

The console I just matched,It's not a copy.,I'm also playing large-scale 3D-based.,Completely eat the current game, I hope it can help you: >>>More

6 answers2024-04-14

You're so good, readln, it's not like you can only read one data. Instead, it reads a specified amount of data, such as readln(a,b); Only two data can be read and stored in A and B. respectively >>>More

5 answers2024-04-14

Baby: "Mom, can you give me 20 yuan?" ”

Mother: "Go, go, no." ” >>>More