What does the cutting position in the clothing company mainly do more details .

In a large clothing company, as far as I know, there are two departments that do tailoring. One is the technical section and the other is the cutting section. In terms of process, the technical section is the previous link of the cutting section.

In the technical section, the cutting position is mainly a single piece cutting. The model master will make the plate according to the customer's requirements for the sample, and after checking, it will be handed over to the tailor for single piece cutting, and finally transferred to the sample master for proofing. This is a necessary process before mass production.

This is all the work to be done by the Technical Section.

Another department involved in cutting is the cutting department. That is to say, when the sample and sample assessment are OK, they will be sent to the cutting department for mass production. The types of jobs in the cutting department are also different, including typesetters and cutters.

These two types of work are the main types of work in the cutting department and belong to technical workers. Then there are other types of work, such as raisering.

Marking, bonding, changing defective pieces and input.

Spreading: According to the number of nesting pieces and the number of cuts, the number of layers of canvassing is determined.

Cutter: Cut from a whole piece of fabric according to the parts of the garment drawn by the typographer to form each tiny part of the garment.

Marking : In order to avoid the problem of color difference in ready-to-wear, marking comes in handy.

Bonding: In order to make the garment wear for a longer period of time, not easy to deform, and for the clothes to wear more straight. Gluing.

machine solves these problems.

Input: The batches of garments cut out should be sent to the production department for production. in order to make the clothes form a finished product. Cast at this time.

Into played a role. His job is to put the parts of the clothes cut out by the cutting department, that is, the pieces into the production.

Production on the first line. With such a process, the work of cutting is considered complete.

According to the requirements of the physical examiner, draw a sample (paint skin) on the cardboard, and then cut, cut the clothing fabric and cut the interlining, if you still want to know, send me a message directly, today is a little busy to talk about this first!

Garment factory cutting is based on the measurement of the human body, the design of the plane drawing, and the cutting of fabric.

Clothing cutting is the process of cutting clothing from the production of a floor plan or three-dimensional cut cloth type, including three types: plane cutting, three-dimensional cutting and prototype cutting. The torso part of the human body fluctuates greatly, and the differences between men and women are also obvious. In terms of technology, clothing cutting is also divided into batch cutting and single piece cutting.

The tailor is mainly responsible for the cutting of large pieces of clothes, and the work is usually completed on the cutting machine.

Including plate inspection, typesetting, material pulling, knife cutting, subcontracting, and some factories have to stick lining, etc.; The pattern maker completes the model production by communicating with the designer, guides the sample worker to complete the production of the sample, and then modifies the board after the designer's confirmation.

The main work he is engaged in includes:

1) Material preparation; 2) Use special tools to mark the main and auxiliary materials;

3) Operate cutting equipment or tools to cut the main and auxiliary materials into blanks;

4) Marking and wrapping the blanks, and filling in the production records;

5) Clean the equipment and work place.

The following types of work are classified as occupations:

Aviation life-saving equipment cutters, garment cutters.

The main work he is engaged in includes:

1) Material preparation; 2) Use special tools to mark the main and auxiliary materials;

3) Operate cutting equipment or tools to cut the main and auxiliary materials into blanks;

4) Marking and wrapping the blanks, and filling in the production records;

5) Clean the equipment and work place.

The following types of work are classified as occupations:

Aviation life-saving equipment cutters, garment cutters.

The main work he is engaged in includes:

1) Material preparation; 2) Use special tools to mark the main and auxiliary materials;

3) Operate cutting equipment or tools to cut the main and auxiliary materials into blanks;

4) Marking and wrapping the blanks, and filling in the production records;

5) Clean the equipment and work place.

The following types of work are classified as occupations:

Aviation life-saving equipment cutters, garment cutters.

The main work he is engaged in includes:

1) Material preparation; 2) Use special tools to mark the main and auxiliary materials;

3) Operate cutting equipment or tools to cut the main and auxiliary materials into blanks;

4) Marking and wrapping the blanks, and filling in the production records;

5) Clean the equipment and work place.

The following types of work are classified as occupations:

Aviation life-saving equipment cutters, garment cutters.