How to prevent mixing, how to prevent mixing

1. The quality of the premix should be ***. Now there are many brands of premix on the market, a wide variety of feed, and many inferior feed are mixed with it, so farmers should be extra cautious when choosing premix. It is necessary to choose the best quality, good reputation and production technology.

Feed manufacturers with strong and stable product quality can not just look at the first.

2. Look at the selection of pig materials. Depending on the stage of growth, there are large differences in the nutritional requirements required for the growth of pigs. The feed formula is designed according to the growth needs of pigs, so what breed and growth stage of pigs should choose the corresponding stage of feed products, not a feed to the end.

3. Feed raw materials should be well controlled. After purchasing back the premix, it is necessary to add feed raw materials to cooperate before it can be eaten by pigs, so the feed raw materials should be controlled. Feed raw materials should be fresh, and moldy feed raw materials should not be used.

It is necessary to choose the raw materials of feed raw material manufacturers with good reputation and excellent quality.

4. Use according to the feed formula. We buy the premix label has a recommended formula, farmers in the preparation of raw materials, in accordance with the recommended formula to mix the premix and feed raw materials, can not according to their own preferences at will to adjust the formula ratio, which will cause nutritional imbalance, is not conducive to the growth and development of pigs.

5. The premix should be kept well. The premix should be placed in a dry, cool and ventilated place, and the seal should be wrapped after opening the bag, and the deteriorated premix should not be used further.

It is better to take pre-control, that is, to make some efforts in the production of orders, that is, you strictly control the material number, specifications, quantity, production cycle and the transition time between each production list, and then check and control according to the order, if you find that there is a mistake, you will immediately reject, of course, there is also a job, that is, semi-finished products, finished products to set up an independent space

Hello, when it comes to the case of spring mixtures, I have a lot to say; Generally, there will be the following aspects of mixing:

1. Material mixing, such as taking the wrong material with the material, or due to the problem of the caliper micrometer of the detection tool, resulting in error; How to avoid it? First of all, the testing tools should be inspected regularly, and before each spring is adjusted, the quality control and production personnel should test the materials before and after, including wire diameter, magnetism, etc.

2. Electroplating mixture, there is something about the shape of the torsion spring at the same time to take the electroplating, if not to do a good job of marking, or not to explain clearly, even if the explanation is very clear, or because of the negligence of the electroplating personnel to appear in the case of mixing, this problem of course appears less, cooperation for a long time and professional electroplating factory will not appear, but in order to reduce the risk to less, when the spring is outsourced, try not to be a similar shape of the spring, that is, it is necessary to take the goods at a time, but also to do a good job of reliability marking, and explain to the person in charge of electroplating, ask the person in charge to notify the relevant operators to separate;

The above is the situation that we usually mix, I hope it helps you, thank you!

What are you talking about? Are there any production materials? In fact, it is very simple, label each material and designate a place to store it, so that it can basically be prevented.

Summary. Hello dear! The following answers to your question about how to prevent product mixing:

In this way, to prevent product mixing: after receiving the stacking instruction from the main control room, the post worker must confirm the material type and location. After the belt is opened, pay attention to observe that there is no debris in the large belt, and when there are debris, the cantilever should be piled out to the side.

Hello dear! For your question of [how to prevent product mixing] Li Yanyan which silver makes the following answer: This round answer sample prevents product mixing:

After receiving the stacking instruction from the main control room, the post worker must confirm the material type and location. After the belt is opened, pay attention to observe that there is no debris in the large belt, and when there are debris, the cantilever should be piled out to the side.

In the process of stacking, when it is found that the incoming material is mixed with other materials or the color is wrong, it will stop the machine in time and report to the main control, and wait for confirmation before starting (and keep a detailed record of the attack on the record book). The post is familiar with the distribution of the material yard to avoid piling the wrong material or the wrong material. When stacking materials, check whether the incoming materials are consistent with the location at any time to avoid mixing.

Summary. How to prevent material mixing.

How to avoid mixing (component case.

Hello, I sent you a case that you can refer to.

Some are simple and some are written clearly, and some are not so much.

How OQC prevents mixing and construction errors.

How to prevent mixing and structural errors from occurring.

When arranging orders, try to distinguish different specifications and fill in the tracking list carefully.

Strengthen employee education and training, and improve the training of new employees and old employees.

Improve the implementation of product operation guidance and on-site guidance for management personnel.

Improve the deficiencies in the guidance for employees and QC foremen in the early stage.

Designated personnel are responsible for formulating effective auditing, rewards and punishments.

How to manage the workshop and tools:

The tools used in the warehouse should be registered, returned in time after use, and the use of the tools should be registered. Commonly used tools in the production workshop should be properly kept to avoid loss. Workshop leaders have the responsibility and obligation to manage.

For damaged tools, it should be reported to the warehouse keeper to fill in the damage form, indicate the cause of the damage, and clarify the responsibility for processing.

All items in the production workshop should be placed in accordance with the divided area, and there should be no parts that do not match it. The waste products should be cleaned up in time to keep the workshop tidy.

When answering the list, try to distinguish the different specifications as much as possible, and fill in the tracking form carefully. Strengthen employee education and training, and improve the training of new employees and old employees. Improve the implementation of product operation guidance and on-site guidance for management personnel. There is a lack of guidance for employees and QC foremen in the early stage.

This is to refine the specific content.

Write about it in context.

I don't want to ask a question.

No special jargon is required.

Question: I'm going to write it early.

2. Strengthen employee education and training, improve the training of new employees and old employees, and improve and make up for the lack of training for new employees in the early stage.

3. Improve the implementation of product operation guidance and on-site guidance management personnel.

4. Improve product operation guidance and on-site counseling management personnel, improve the index improvement points, and improve the guidance defects for employees and QC foremen in the early stage.

5. A special person is responsible for formulating effective auditing, rewards and punishments.

Don't ask questions.

Discuss what happened in terms of what happened.

Didn't the question go above, because the wrong label led to a mix-up.

Answer: In fact, first of all, I also want to say that not only do your customers not like such 8D reports, but I also don't like people to write about rectification measures at every turn, "the quality awareness of operators is not strong, strengthen training", "punish the parties 300 yuan" and so on. When I was the person in charge of quality in the enterprise, whether it was my first business or internal production engineering, in addition to similar problems, if I SQE or process quality engineer handed over such an improvement report to me, I would inevitably get a hard criticism.

Because to shift the responsibility for quality problems to the operator, either irresponsible coping, or do not understand quality management. Because in my work experience, most of the operators I have come into contact with are very simple workers. There are indeed tricky and slippery ones, but there are very few of them.

Therefore, the problems in the above examples can all be found in the management system and method.