Tissot T014 427 11 051 01 small 3 needle how to adjust

Tissot is an automatic watch, if the three-warranty period has passed, you can try to adjust it according to the following methods:

1. The watch handle is pulled out of the second gear, which is to adjust the time.

2.Do not adjust the time and its watch functions between 23:00 p.m. and 5:00 a.m., so as not to damage the Longines watch mechanism.

3. The watch is not pulled out of the state of upward rotation is the winding, Sina Qin watch or long-term watch is recommended to wind about 30 times, so that the watch can reserve some power, so as not to be caused by insufficient activity caused by pause or timing inaccurate.

4.The watch handle is pulled out of a gear, is to adjust the date, 1-31 days, if there is only 30 days of the month, you have to manually adjust the 31st. (Note that the calendar is adjusted at 12 o'clock in the evening, if the calendar is adjusted during the day, you can manually rotate the time by 12 hours).

Tissot is actually quite good, it is recommended to go to the official designated repair shop to adjust the time more securely.

It is Tissot's three-eye chronograph sports series.

Three subdials:

The small dial of the point is the hand chronograph minute counter;

The small dial of the point is the hand chronograph hour dial;

The small disc of the dot is the normal running seconds of the watch (this disc has no connection with manual chronograph).

Button usage: 1The upper and lower two of the three keys on the right side of the dial are manual chronograph buttons, press the upper button to start or stop the timer, and press the button to reset the watch hand to zero.

Press the up button first to start the chronograph, at this time the second chronograph hand in the center of the large dial (that is, the longest and thinnest hand) and the hands of the two subdials start to move, the minute dial will only show the movement 1 minute after the start of the chronograph, one bar per minute, and the chronograph will return to the new position after 30 minutes. When the upper button is pressed again to stop the chronograph, the second and minute hands will stop immediately, and then press the lower button to reset all watch hands to zero.

2.The key in the middle of the minute and day adjustment key, due to Tissot's airtight and waterproof design, so before the adjustment needs to rotate the key counterclockwise to loosen, loosen and pull out, the first level is the adjustment date, the second level is the adjustment time (because the parts are finer, so the force should be light during operation, in case of damage), after the adjustment, push the adjustment lever back, tighten clockwise, and the adjustment is over!

What is the purpose of the tiny hands on the dial of this Tissot watch?

Hello, dear, I'm glad to answer for you. What are the functions of the small hands on the dial of this Tissot watch:1

The small disc on the left side of the Bibu of the upper mu family is marked as 10, 20, 30, and is a hand chronograph minute dial; 2.The small disc on the right side of the upper part is marked as 24680, which is a hand chronograph 1 10-second dial; 3.The small disc marked 20 40 60 on the lower part is the watch's normal running seconds dial (this disc has no connection with manual chronographing).

The above is my answer to Xun Qin, I hope kissing my answer spike chain can help you, I wish you a happy life!

Tissot has 2 functions. Tissot can read the time, and very precise time, of course Tissot can also go to the stopwatch, the timer function.

Notes from Tissot:Press the B button to reset the stopwatch, check whether the position of the stopwatch second hand and the large dial second hand point to the direction of 12 o'clock, this problem must be solved first.

If the position is incorrect, please pull out the crown to the second square, the current crown needs to be unscrewed counterclockwise and then pulled out, the old watch can be pulled directly. Press the A button one at a time, and the big seconds hand begins to move. Adjust it to the 12 o'clock position.

This watch is okay, very thin and thin, I quite like such a thin watch;

I bought one on the National Day, and the next day I fell off the table and fell on the ground, but fortunately, there was no damage, very unexpected;

As for the carved ring, whether you like it or not, it is up to the benevolent to see if you like it;

It's not too good to go, after all, the Swiss movement, no problem!

Tissot (Tissot) this Kutu series of mechanical men's watches (see picture below) uses the ETA automatic chronograph movement, and the official unified sales price in China is 6550 yuan, which can generally be sold at a 10% discount.

Yes. I just bought it last night today. Arrives today. It feels extraordinarily atmospheric.

That's what I'm bringing with me, but it's best to buy a steel belt. The belt is fragile and difficult to maintain. The most important thing is that it is very troublesome to change the original steel belt, and it takes three months to return to the factory.

Steel Strip ** is 1 of Table 3It is much easier to buy a steel belt and change the belt. I regret that I didn't buy a steel belt at that time.

How much does this watch cost? What I brought with me was given to me.

It is a white plate, 53 is a black plate, and there is no difference except for the color. There is no model in the back, it is and. It is a rose gold black dial Le Locle, 73 is a gold white dial, of which the movement oscillating weight is metallic silver, and these four movements are all ETA2824-2, which is expected to be adopted.

It's much the same, it's all a series, depending on which one you like.

Tissot is a Tissot Carson mechanical men's watch powered by the ETA2836-2 automatic movement.

1. Pull open the crown of the watch.

2. Pull out to the first grid to adjust the calendar. Turn the crown counterclockwise to adjust the day of the week and clockwise to adjust the date.

3. Pull out to the second grid to adjust the time. Clockwise or counterclockwise is acceptable.

Adjusting the calendar and time between 10 p.m. and 2 a.m. will damage the mechanical movement.