The phone is flooded, and it can be used but the charging is very slow

Mobile phone service innovation expert Beebee Bee answers for you: If the battery is removable, the battery should be removed as soon as possible to reduce the corrosion of the internal components of the mobile phone caused by the electrolysis reaction, and at the same time, it can also avoid the occurrence of the phenomenon that the battery cannot be charged due to short circuit circuit draining. If it is not cleaned, the liquid will leave impurities attached to the components after the electrolysis reaction, and its electrical properties will be affected for a long time, such as leakage, etc., and in serious cases, the components or motherboard wires will be corroded.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Summary. Hello, first of all, 1. The slow charging may be because the phone is not completely dry after the water enters, and within 24 hours after the preliminary treatment, do not turn on the phone without authorization, which may burn the motherboard, and after blowing the wind for a while, continue to shake the phone. It can then be placed in a drying box or in rice for drying.

Therefore, all parts of the phone need to adapt to the unstable voltage in the phone. Therefore, turn off the mobile phone for a day, use a hair dryer to dry the mobile phone or put the mobile phone in a dry place to dry; Secondly, 2. If the phone is still charging slowly after trying to operate, it may be because the motherboard is corroded, resulting in problems such as high resistance, high power consumption, and heating, at this time, you need to send the mobile phone to the maintenance department for inspection and repair.

Hello, first of all, 1. The slow charging may be because the phone is not completely dry after the water enters, and within 24 hours after the preliminary treatment, do not turn on the phone without authorization, which may burn the motherboard, and after blowing the wind for a while, continue to shake the phone. It can then be placed in a drying box or in rice for drying. Therefore, all parts of the phone need to adapt to the unstable voltage in the phone.

Therefore, turn off the mobile phone for a day, use a hair dryer to dry the mobile phone or put the mobile phone in a dry place to dry; Secondly, 2. If the phone is still charging slowly after trying to operate, it may be because the motherboard is corroded, resulting in problems such as high resistance, high power consumption, and heating, at this time, you need to send the mobile phone to the maintenance department for inspection and repair.

It's been a few days, and there's nothing wrong with it except for slow charging. I didn't turn it off at the time, I used the hair dryer to dry it and use it directly.

Can sun exposure be better?

Now it's okay to bask in the sun, try it.

1. Shut down: This is definitely the first step to save the phone, no matter what the degree of water ingress of the mobile phone, please turn off the phone first, otherwise it will burn the circuit directly;

2. Check the location of water ingress: In most cases, the location of a large amount of water inlet of the mobile phone is generally the headphone jack and charging hole, because as long as it is not broken in other places, there are no cracks;

3. Check that there is no external damage in spring: if it is simply soaked in water, the problem is not big. But if it rains and falls out, check whether there is a crack in the mobile phone and water ingress;

4. Simple water intake: If it is just a simple water intake, then take a hair dryer, adjust it to the cool breeze setting, and dry it with a small wind. Because most of the water enters from the headphone jack, the mobile phone should stand up;

5. Wait a few days before turning it on: simply enter the water, when the phone is dried, you can turn on the phone and use it normally, of course, if you can't turn it on, it can only be that the water enters too much, and the circuit inside is broken to be repaired in time.

What is the reason why the phone is slow to charge after it dries into the water?

The slow charging of the mobile phone may be because the internal moisture of the mobile phone is not completely dry, and the mobile phone needs to be placed in a dry and ventilated place to dry the internal moisture of the mobile phone, or the mobile phone can be sent to the repair place for processing, because the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so do not try to disassemble the mobile phone yourself, after the mobile phone enters the water, it will cause the mobile phone motherboard to be corroded, for example, the internal circuit of the mobile phone will be corroded, which will lead to large resistance, high power consumption, heating, etc., and even damage the normal chip, The mobile phone has serious water ingress and needs to be sent to the repair shop for treatment in time.

Take Huawei Mate30 and EMUI10 as examples

1.The slow charging may be due to the fact that the phone is not completely dry after the phone is flooded, and all parts of the phone need to adapt to the unstable voltage in the phone. Therefore, turn off the mobile phone for a day, use a hair dryer to dry the mobile phone or put the mobile phone in a dry place to dry;

2.If the phone still charges slowly after trying to do the previous operation, it may be because the motherboard is corroded, resulting in problems such as high resistance, high power consumption, and heating, and you need to send the mobile phone to the maintenance department for inspection and repair.

Water ingress into the mobile phone will cause your mobile phone motherboard to be corroded, and it will also have potential effects, such as circuit corrosion causing large resistance, high power consumption, heating, etc., and even damage the normal chip.

If the charging is slow, it's because you might make sure that the phone is completely dry and that all parts of the phone have to readjust to your unstable voltage. It's best to turn it off for a day first. Generally, if the mobile phone gets into the water, do not immediately install the battery and turn it on, use a hair dryer to dry the mobile phone or put it in the sun.

If the phone is charged slowly when it enters the water, it means that there is still water inside. In this case, you can't use a hair dryer, which blows water onto the parts. You can try to put the phone into the rice and suck out the water in the phone through the rice.

The slow charging of the mobile phone may be caused by the water on the motherboard of the mobile phone, which causes damage to the fast charging accessories, and it is recommended to take it to a repair shop for repair.

It should be that the phone is affected, and it is recommended that you go to repair it!

Go to the mobile phone store and take a look, it is estimated that the battery problem.

If you are using a Huawei mobile phone, it is recommended to turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.