Can the screen of the mobile phone still work, and will the screen of the mobile phone be broken whe

After the mobile phone gets into the water, first quickly take out the battery and SIM card, drop the water, wipe it clean and put it in a cool but not humid and ventilated place to air dry! (Be careful to make sure the inside of the machine is completely dry).

Of course, if you are in a more urgent mood, you can also use a hair dryer to dry it! But don't use a warm air! (It is easy to cause deformation or even damage to the hardware of the mobile phone.) )

Then take a dry plastic bag after blowing, fill it with rice, raw, or desiccant, put the mobile phone in it, and seal it for a period of time, which is conducive to absorbing the water that cannot be blown clean!

If you're lucky, you can still use your phone if you dry it! If it's broken, it means that the main version of the phone has been ended! It is recommended to go to the outlet to the engineer for inspection and maintenance.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Depending on the phone, the water ingress time is different, and the actual situation may be bad or not.

1. First of all, of course, the whole machine should be disassembled, and the corresponding screwdriver should be prepared before that.

2. When removing the screen, pay attention to gently separating the chiplet connected to the motherboard from the motherboard.

3. Before removing the metal shielding isolation layer, tear off the network access card and the card slot sticker under the network access card.

4. The last is to take a hair dryer to dry, but don't blow on the screen for a long time, such a high temperature will destroy the screen, even if the screen has a watermark, you can use the phone normally, the water in the screen will generally dry in two days, and you will see that the watermark inside is getting smaller and smaller.

5. Blow the front and back of the motherboard to ensure that there is no moisture residue, and try to blow out the water at the earpiece and buttons.

6. Finally, put the disassembled mobile phone in a dry and noisy place, preferably about two days, and then install it.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Hello 1, once the mobile phone enters the water, you must not turn on immediately, when the power is turned on, the current is easy to burn out after the water encounters water, and the mobile phone is close to being scrapped. What you want to do is that the mobile phone can be safely and securely without repairing it after it gets into the water.

2. First of all, the battery of the mobile phone should be removed and the surface moisture of the battery should be wiped dry.

3. Then use a dry paper towel to absorb water from the phone back and forth.

4. Then use a hair dryer to aim at some small gaps in the mobile phone to blow and absorb water, pay special attention to: the hair dryer should not be turned on too hot, otherwise blowing hot air into the mobile phone will easily cause some accessories in the mobile phone to preheat and melt.

5. Don't shake the phone all the time after the phone gets into the water, in order to shake out the water in the phone, some water does not flow into the phone, if you shake the phone at this time, it will often make the water flow to the phone more, and the gains outweigh the losses.

6. After almost drying the water of the mobile phone, if you know how to disassemble the phone, if you are sure, it is recommended to disassemble the phone for more comprehensive water absorption.

Don't turn on and off so that your phone screen will burn,The Samsung I bought before said that it was waterproof,I didn't care about it at the time.,It costs a lot of money to change the screen motherboard.。

If water enters the inner screen of the mobile phone, you can blow it with a hair dryer, and then put the mobile phone into the rice bag, you can naturally absorb the water, so that the water on the inner screen of the mobile phone can come out.

You can take a hair dryer and blow those holes, or wait a little longer and it will do it on its own, as I've done before.

Throw out the water in the mobile phone, or dry it and wipe it with a paper towel, it is really not possible to recommend that you go directly to the mobile phone store to repair, if it still does not work, it is recommended that you change to a new mobile phone.

Summary. Hello, you can't turn on the phone immediately after the water gets in, you have to wait until all the water in it has evaporated, you go to repair, you must not turn it on, the things inside will be burned out when you turn it on, you go to the repair point to repair it.

Can I still use the phone screen after it gets into the water?

If the screen of the mobile phone is flooded, can the replaced screen still work?

Hello, you can't turn on the phone immediately after the water gets in, you have to wait until all the water in it has evaporated, you go to repair, you must not turn it on, the things inside will be burned out when you turn it on, you go to the repair point to repair it.

With a new screen, can the old screen be exchanged for money?

It shouldn't be able to be used.,The line inside is estimated to be in.

It's flooded. If the water is not serious, you can't change money.

Are you there. That's fine.

This depends on how much water gets into the screen you replace.

You can consult the person who repaired the phone.

The original mobile phone screen, into a little water, the screen is just flowers, sometimes the touch screen is not sensitive, the replaced screen can be exchanged for money.

Someone who sells mobile phone repairs.

The original screen can still be exchanged for money, and you'd better consult for details.

Before selling, you must air dry the screen completely, now it is a high temperature in the summer.

If you are using a vivo mobile phone, the mobile phone liquid treatment method is based on the family:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to suck out the water in the gap to imitate it; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place the screen with the screen facing up and the front camera tilting upward;

5. Bring your mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct professional testing. (Customer service center address: enter vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to inquire about the address of the customer service center) It is recommended to call the customer service center in advance to confirm relevant matters and understand the working time, so as not to delay valuable time.