Introduction to the repair and maintenance of hardwood flooring

The correct maintenance method of sports wood floor is the foundation of the floor, the stadium wood floor investment is large, the maintenance is difficult, and the cost is high, so the correct maintenance method directly affects the use effect and the service life of the floor. The precautions for the maintenance of sports wood flooring are as follows:

1. It is strictly forbidden to wax the sports wooden floor. In the case of wood products, waxing is a common way to protect the product. However, sports wood flooring has strict requirements for the coefficient of friction of the floor surface.

If the surface of the floor is too smooth, the athlete is prone to slippage due to the reduction of the coefficient of friction during exercise. It will affect the performance of the normal level of competition, and in serious cases, slip and fall accidents will occur. Therefore, the paint maintenance of sports venues is not waxing, but "matting", (refers to a certain area through long-term friction of the sole to polish the paint surface.

Resulting in a decrease in the coefficient of friction in the area), matting refers to the use of special equipment to remove the paint gloss or the use of a special matting agent to remove the oily gloss.

2. It is strictly forbidden to clean the floor with solvent-based oil products. Solvent-based oil products: gasoline, kerosene, alcohols and other products that dissolve paint surfaces.

Because solvent-based products will cause damage to the floor paint, it will reduce the friction coefficient of the paint surface, increase the finish and affect the normal use of the floor.

3. Floor ventilation holes, expansion joints, heating, sports equipment installation parts and other dead corners should be cleaned regularly, not blocked, and can be cleaned by vacuum cleaner or air compressor air blowing. If there is too much dust accumulation, the part is prone to mildew, insects, blockage and other consequences.

4. The surface of the floor can be cleaned with a vacuum cleaner at regular intervals every day, wiped with a wet mop that does not drip water, and the number of mopping should be increased in the dry season to ensure the air humidity in the venue.

Wood floor repair requires different repair methods according to different damage conditions. Here are some common methods of repairing wooden floors:

2.Replace damaged boards: If there is serious damage to the floor, such as cracking or deformation, the damaged planks need to be removed and replaced with new ones.

3.Fill the gaps: If the gaps between the wooden floors are too dusty, you can use the wooden floor slurry caulk to fill the gaps, and then polish the surface.

4.Repair dents: If there are dents in the surface of the wooden floor, you can use a wood floor filler to fill the depressions and then polish the surface.

5.Repair water stains: If there are water stains on the wooden floor, you can use a wood floor repair agent to polish the wooden floor at the water stain, then fill in the gaps and depressions, and finally repaint.

It should be noted that wood floor repair requires the use of professional tools and materials, if you are not familiar with the operation, it is best to ask a professional wood floor repair personnel to repair it.

As a frequently used floor material in the home, after a long period of use, it is inevitable that there will be some problems such as rough wear, scratches, and dents, which will affect the beauty and durability of the home. Next, I will share some tips and methods for wood floor repair, I hope it will help you.

1.Clean. Wooden floors need to be cleaned regularly to avoid the accumulation of dust and stains. You can use a soft rag or a soft brush to clean the wood floor surface, and do not use detergents that contain acidic ingredients to avoid damaging the wood floor surface.

2.Fill in the depressions.

If you find a dent or notch in the surface of the wood floor, you can use a special wood floor filler to fill it. First, pour the filler on the notch, then use a scraper or a straight plastic plate to flatten the filler, wait for it to dry and then polish it with a polishing machine to make the filled part consistent with the color of the surface of the log floor.

3.Repair scratches.

When there are scratches on the surface of the wood floor, you can use the wood floor repair wax to repair it. Apply the wax directly to the scratch and heat it with a soldering iron or hot air to melt and flatten. Finally, polishing with a polishing machine can repair the buried scratches.

4.Renovation. Long-term use of wood floors may have severe wear and scratches on the surface and need to be refurbished.

You can use sandpaper to polish the surface of the wooden floor, then clean and dry it. Then use the waxing rock machine to wax the wooden floor to enhance the brightness and durability of the wooden floor.

In short, when repairing wooden floors, different methods need to be taken according to different damage situations to avoid using improper methods that cause more serious damage. At the same time, it is also necessary to pay attention to regular cleaning and maintenance, find and deal with problems in time, and prolong the service life of wooden flooring.

Wooden floors are very popular because they are beautiful, durable, and easy to maintain. However, even the strongest wood floors can wear out and break over time and need to be repaired. Here are some tips for repairing wood floors, for example.

1.Repair small scratches.

Small scratches are one of the most common problems on wooden floors. These scratches can be easily repaired. First, use a piece of fine sandpaper to gently smooth out the area around the scratch.

Then, fill in the scratches with an appropriate wood floor repair agent of the same color as the wood floor. Apply the patch to the scratch, scrape it flat with a spatula, and allow to dry. It is then sanded with fine sandpaper.

2.Replace damaged boards.

If there is a large tear or breakage on the wooden floor, or if some of the planks have lost their sturdiness, then you need to consider replacing them. First, determine which planks need to be replaced. Then, using a saw or carpenter's saw, the replaced planks are sawn along the textured lines of the floor.

Place a new plank in the vacancy and fix it with a nail.

3.Polished wooden floors.

Polishing is the best way to keep your wood floors beautiful and smooth. Before polishing, clean the floor thoroughly and clean it clean. Use sandpaper or a grinder to polish the floor until the surface is flat.

After the wheel is messed up, use a variety of different sizes of sandpaper to continue sanding, and finally use a dust-free mop or a clean, soft cloth to wipe the floor. The floor polishing machine is then used for polishing.

4.Regular maintenance.

Applying bright oil to your wood floors regularly can increase the life of your wood floors. Use a bucket or brush to apply bright oil, and take care of metal and wooden handles to keep them shiny.

In conclusion, wood floor repairs require serious consideration and take time and effort. If you want to maintain the appearance and longevity of your wood floors, clean and maintain them regularly.

In private spaces such as bedrooms and dens, most families choose to lie on the floor, which not only makes it convenient for children to play, but also adds to the taste of the interior. But whatever it is, using it for a long time will cause problems, so we must know how to repair the wooden floor. Then let's take a look at how to repair the flooring and maintenance tips of wood flooring.

Partially damaged flooring: If the floor is partially damaged and the area is not large, we can place some furniture products on the damaged floor to cover the floor, which requires a reasonable overall layout. Especially if the floor is damaged, it can easily cause scratches.

Floor arch crack: Because the floor has a certain moisture content, it is easy to expand and contract, and it is easy to arch in summer and cracks in winter. If this is the case, the floor should be completely removed, cleaned, leveled, and resurfaced.

If there are cracks, they need to be treated with glue.

The corners of the floor are tilted: If the corners of the floor are all lifted, most of it is due to relatively humid spaces that must be dehumidified regularly, such as turning on the air conditioner. Then use some flat weights on the raised floor, usually half a month, and the phenomenon of floor lift will no longer exist.

Wear and scratches on the surface of the floor: Solid wood floors are generally more prone to scratches, i.e. damaged paint layers, and the scratches are seen deep and shallow before deciding on the repair method. If the surface of the solid wood floor is not scratched and shallow, then you can directly choose the method of polishing and waxing, and finally quietly wipe it with a clean towel.

You can also buy a bottle of floor wax at the market and wipe it as you normally would, or you can deal with shallow floor scratches.

Insulation: If there is a leak of heated water on the wooden floor, it must be wiped clean in time. It should not be exposed to sunlight or baked in an electric oven, try to avoid drying too quickly and cracking the floor.

Scrubbing: For daily cleaning, you can use a vacuum cleaner to remove it, and then clean it with a special detergent. For natural lacquered wood solid wood flooring, water is not good for it.

You can get it for free