How does the car start? How to operate the car start

As a novice, it is better to be a little more rigorous, and when you are proficient, you don't need these passwords, slowly lift the clutch when you start, wait until you reach the separation point of the clutch, and then gently step on the accelerator and wait for the car to move when you slowly lift the clutch completely (note that the action should be slower at the beginning to avoid stalling), and then quickly lift the left foot after the clutch is completely separated, and use the clutch to shift a password is "two fast and one slow". Pressing the clutch should be fast, before reaching the separation point and passing the separation point, it should be fast, and when it is time to travel at the separation point of the clutch, it is necessary to slowly lift the clutch and press the throttle lightly. When changing gears, you must remember to press the clutch to the end in the gear, and it is strictly forbidden to step on the clutch for a long time after completing the gear shift or during driving, which will lead to excessive wear and tear of the clutch!

This is a little experience of mine, in fact, you will become more and more proficient after driving for a while, I wish you a happy and safe drive!

1. Start the engine 2, step on the clutch 3, hang 1st gear 4, release the brake 5, slowly lift the clutch while stepping on the accelerator a little, pause a little when the clutch is lifted to the car to move, and wait for the car to walk up after you can release it all. Stepping on the accelerator is how much you need to press, and you can master the accelerator according to the speed of the car.

First of all, get in the car and close the door, send the seat belt, confirm that the car is in neutral, hit the car, lift the clutch lightly, feel the car vibrate slightly, light the accelerator, and the car will start steadily.

Generally, when the car starts, it is necessary to step on the accelerator at the same time as the clutch, which can be divided into two types: flat road start and half-hill start.

1. Flat road starting operation

First step on the clutch pedal with the left foot, put the right hand into 1st gear, press the horn with the left hand, release the parking brake lever with the right hand, then slowly lift the clutch pedal with the left foot to semi-linkage, slowly step on the accelerator pedal with the right foot to refuel, let go of the clutch pedal with the left foot after the car starts, and finally refuel with the right foot to speed up to the normal speed, drive the car into the normal lane and turn off the turn signal.

2. Half-slope starting operation

When starting, due to the greater resistance, so the clutch should be more stable than the flat road 3-4 seconds, when you put down the hand brake, do not immediately loosen the clutch, must immediately refuel, and wait for the car to travel slowly 3-4m, and then slowly lift the clutch, so as to ensure that the car starts smoothly on the ramp and does not stall.

To dare to refuel, start uphill, put down the handbrake, immediately refuel, so that the speed of the engine reaches about 1500 rpm, so as to ensure that the car uphill start with sufficient power, there will be no "shaking" phenomenon. The key to a smooth start on a ramp is to coordinate your hands and feet properly, otherwise, it will cause the engine to stall or the car to slip backwards.

Precautions for starting the car

1. Before getting into the car, be sure to look around the vehicle to determine the safety of unhindered driving.

2. When starting, if you feel that the engine power is insufficient and the engine is about to turn off, immediately step on the clutch pedal and start again.

3. The clutch pedal must be carried out according to the essentials of action. If the relaxation is too slow, the contact surface between the clutch friction plate and the pressure plate and the flywheel will wear faster, resulting in damage to the clutch components. The clutch pedal relaxes too quickly. If you press the accelerator pedal too little, it will stall the engine.

4. The refueling of the accelerator pedal should be flexible gradually. Excessive refueling will cause the car to "spasmodic" forward impulse, which not only affects safety, but also damages the transmission parts of the car. When starting, if you can't get into gear once, you can release the clutch pedal once and then hang it, or try to hang other gears first, and then hang the starting gear.

5. After the car starts, it is not allowed to turn the steering wheel immediately and drive into the road, and it should gradually enter after confirming the safety.

1. Adjust the seat before driving to ensure that your feet can step on the clutch, brake and accelerator more firmly and comfortably. For manual transmission cars, when starting to hang up the first gear, the clutch should be pressed to the end, and the right rough slide foot is put on the accelerator to prepare.

2. When starting to start, the clutch of the left foot is slowly lifted to nearly half, when you feel that the vehicle is shaking, you will release the handbrake in time, and then gently click the accelerator, and slowly release the clutch when the car wants to move forward, and then add a little throttle to start successfully.

3. If you are a novice at the start of the ramp, you should pay special attention, if you release the handbrake quickly, and the clutch is not lifted in place, it is easy to slip. The best way to do this is to press the clutch and brake when starting, and the handbrake can be used or not. Release the brake when the clutch is halfway up, at this time the vehicle is in a semi-clutch state, the car will not slip back, and at the same time let the limb add the throttle, slowly release the clutch, and the start is successful.

1. Cut off the clutch: After the engine starts and runs normally, after confirming that the car is surrounded by obstacles and has all the conditions for the car to start, press the clutch pedal to the end with the left foot to completely separate the clutch. If the clutch pedal is not pressed to the end, the clutch can not be completely separated, and the power output of the engine is semi-linked with the transmission.

2. Transmission into gear: put the transmission shift lever into the gear, if the first shift is not smooth, you can pull the shift lever back to the neutral position, and then carry out the second shift until it is successfully completed.

3. Relax the hand brake lever: first pull the hand brake lever up a little to release the safety lock, and then push the manual brake lever forward and down, all the way to the end, so that the brake is completely relaxed. At this time, it is necessary to observe the indication of the hand brake indicator on the instrument panel, if the indicator light is on, the hand brake is not completely relaxed, and the hand brake lever should be pushed forward further until the hand brake indicator is off.

If the manual brake is not fully relaxed, it will produce brake lag, so that the car can not start smoothly, that is, it can barely start, and the speed can not be increased due to the delay of the manual brake during driving, and the manual brake will also be damaged.

4. Observe the surrounding situation of the car: Before the car starts, you must observe the surrounding conditions to further determine whether it is safe. The front of the car can be observed from the front window, which is clear at a glance, and the side and rear of the car can be observed through the rearview mirror, or the window glass can be lowered to stick your head out of the window.

The above is about how to start the car correctly, if you don't know before, you can refer to the above content, I hope it will be useful to you!