The integrated graphics card is banned by me and the monitor screen is black What should I do

1.Check that the monitor cable is firmly and reliably plugged into the host interface, and then check that the contact between the graphics card and the motherboard's I-O slot is good;

2.If the computer starts normally with another monitor, the original monitor may be damaged;

3.Check if the CPU fan is running;

4.You can remove all components except the CPU, graphics card, and memory sticks, and then start up your computer. If there is a fault in the memory, there should be an alarm sound. If there is no alarm sound, then turn on the CPU and re-detect. If the computer screen is still black, it is recommended to replace the motherboard;

5.If the system installs software and updates patches that cause a black screen, you can try to uninstall the update file;

6.After installing the software on the computer, restarting the update causes a black screen and waits for the update to be completed.

7.Enter the safe mode to repair the computer, if it can't enter the safe mode, please reinstall the system.

The black screen just doesn't light up! It has nothing to do with whether the graphics card is banned or not!

The problem is somewhere else!

Do you have a test card, run down ** to try. Or is there a crisp "drip" sound after the boot is turned on!

If it's just the graphics card banned, clearing coms must be good, however, pay attention to unplugging the power cord when clearing, otherwise you can't clear it!

BIOS discharge is the positive solution.

Take the little battery off your motherboard, go up to the room, and you're good to go.

Don't disable it in the future, your discrete graphics card is driven, and the system will automatically recognize it.

Most of <> laptops have dual graphics cards, and accidentally put the integrated graphics card.

If it is disabled, the screen will go black.

Here's how to do it.

Method. 1. Press and hold the power button for 8s to turn off, turn on and press F8 to select "Latest Correct Configuration", and press Enter.

Method. 2. Press and hold the power button for 8s to shut down, turn on and press F8 to select "Repair Computer", and enter the stove to do so.

Method. 3. Press and hold the power button for 8s to power off, turn on and press F8 to select "Safe Mode, press Enter, and enable the integrated graphics card after entering.

Method 4: Enter the PE system to remove the driver of the integrated graphics card, restart it into Windows, and reinstall the driver.

Method. 5. Go to the BIOS settings, find the IntegratedPeripheralsoption option, then find AGPVGASELETION and set its option to AGPslot.

If it is a laptop, none of the above methods can solve it, remove the laptop battery, connect an external hidden front power supply, and turn on the computer.

Summary. Method.

1. Press and hold the power button for 8s to turn off, turn on and press F8 to select "Latest Correct Configuration", and press Enter.

Law. 2. Press and hold the power button for 8s to shut down, turn on and press F8 to select "Repair Computer", and press Enter.

Method. 3. Press and hold the power button for 8s to power off, turn on and press F8 to select "Safe Mode, press Enter, and enable the integrated graphics card after entering.

Method 4: Enter the PE system to remove the driver of the integrated graphics card, reboot into Windows, and reinstall the driver.

Method. 5. Go to BIOS Settings and find Integrated

peripherals

option option and find agp

vgaseletion, set its option to agp

slot。If it is a laptop, none of the above methods can solve it, remove the laptop battery, connect an external power supply, and turn on the computer can be solved.

I accidentally disabled the graphics card and the computer screen went black, how to solve it?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Method. 1. Press and hold the power button for 8s to turn off, turn on and press F8 to select "Latest Correct Configuration", and press Enter.

Law. 2. Press and hold the power button for 8s to shut down, turn on and press F8 to select "Repair Computer", and press Enter.

Method. 3. Press and hold the power button for 8s to power off, turn on and press F8 to select "Safe Mode, press Enter, and enable the integrated graphics card after entering.

Method 4: Enter the PE system to remove the driver of the integrated graphics card, reboot into Windows, and reinstall the driver.

Method. 5. Go to BIOS Settings and find Integrated

peripherals

option option and find agp

vgaseletion, set its option to agp

slot。If it is a laptop, none of the above methods can solve it, remove the laptop battery, connect an external power supply, and turn on the computer can be solved.

Or try restoring the battery to factory settings.

win10 system at the beginning of the accidentally use win+x to disable the card int.

Pressing that button on power is also a black screen.

Keep pressing the power button.

Now it's shutdown.

Keep pressing the power button?

Right. Hold it down, and it will go out on its own.

That can only go to the nearby repair after all, this is the only setting.

I hope I can help you, if you are satisfied with my service this time, please give me a thumbs up! Have a great day!

If your computer is a dual graphics card, and you just disable the integrated graphics card, then this will not cause the computer to have a black screen, if the integrated graphics card is disabled, you can power off the computer, and then pull out the motherboard battery and discharge it for 10 minutes, so that it can return to normal.

It is likely that the CPU does not work due to the disabling of the CPU. This can be discharged by the motherboard and restored to factory settings.

Unplug the power cord, remove the motherboard button cell, and stagnate for more than 10 minutes. Replace the motherboard coin cell battery, plug it in, and try to turn it on.

Dual graphics cards are completely meaningless.,As long as the independent graphics card is working, the integrated graphics card won't work at all.,,You can reinstall the system once.,Or restore the system can be perfectly solved.。

Can I still use dual graphics cards on desktop computers?

It should be a notebook, right?

Solution: Just remove the laptop battery and install it.

If it's a desktop computer.

Just snap the little battery off the motherboard and put it back on.

If this is the case, then it means that your monitor is plugged into the one with the integrated graphics card. Hee-hee, you have to plug it into the discrete graphics card.

Connect the cable to the interface of the discrete graphics card.

Desktop computer win seven dual graphics card,Accidentally use the integrated graphics card process with a black screen,I think you should be able to open it directly in the settings,And it should be able to use normally。

Solution steps: 1. Start the computer, and when you boot to the Windows 10 boot logo, press and hold the power button to force the shutdown, and repeat the forced shutdown 3 times!

2. Repeat the steps for about 3 times and the "Automatic Repair" interface appears after startup, and we click Advanced Options to enter;

3. Next, you will go to the interface of selecting an option, and then click "Troubleshooting";

4. Startup settings appear.

5. Startup Settings appears, then click the restart button in the bottom right corner, and the computer will restart.

6. Next, everyone will press the serial number to enter the safe mode.

Can. 7. After entering safe mode, we go to Device Manager.

on your Mac, enable integrated graphics.

That's it!