What are the things that tend to make a watch magnetic?

Although the quartz watch will not be magnetized, it will stop in a strong magnetic field. Therefore, when using the watch in daily life, it must be kept away from the magnetic field, away from TV, radio, induction cooker, etc., which will be magnetized due to long-term contact.

Many friends may be very confused, how can you tell that the watch is magnetic? There are many reasons why the watch is inaccurate or does not go, and the magnetic field in our daily life is everywhere, in order to accurately judge whether the watch is magnetized, you can use a flexible compass, put the compass flat on the table, hold the watch and shake it back and forth above the compass, if the needle of the compass moves, it means that it is magnetized.

There are two ways to degauss:

Methods of degaussing.

First, it is a professional demagnetization of the watch shop.

Methods of degaussing.

2. If you are far away from the watch repair shop, you can also demagnetize yourself, the specific method is: find a piece of iron that is hollow in the middle and is not affected by magnetization, stand firmly on the table, and then the magnetism on the watch can be "sucked" by the iron block to restore the watch to normal. It is to use a magnetized iron can, the two ends are connected, and the magnetized love watch can be demagnetized by moving back and forth in the iron can for 5-6 minutes.

In our daily life, we use computers, watch TV, turn on air conditioners, touch refrigerators and other electrical appliances, or when electrical appliances are running, magnetic fields will be generated, and watches and electrical appliances will naturally be magnetized. Therefore, the magnetization of the watch is actually a very common phenomenon, the environment we live in has a magnetic field, so the watch worn will also inadvertently enter these magnetic fields, and the magnetization of the watch has become a very common status quo, what we have to do is to minimize the degree of magnetization of the watch, because it is impossible to ensure that the watch is 100% free from magnetism.

Watch maintenance and repair can refer to the service center of 702] Joy City Office Building, Xidan District, Xicheng District, Beijing to provide Swiss watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, and strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

Household appliances, electronics, and things that have a magnetic force.

Many components in a mechanical watch are made of steel, such as a hairspring, escape wheel and pallet fork. After being exposed to a magnetic field, it is easy to cause abnormal timing of the watch (usually making the watch go faster). Among them, the hairspring is an ultra-fine coil spring, which is most susceptible to the influence of vibration, magnetic field and gravitational attraction, causing the hairspring to attract each other and even produce adhesion, so that it shrinks and expands to produce irregular movement, affecting the normal running time of the watch.

To deal with a magnetized watch, you can use a demagnetizer or a demagnetizer. The principle is simple: magnetization is to make the magnetic domains (also called magnetic fields) in the magnet body align consistently, and degaussing is to disrupt their arrangement.

Hello, glad to answer for you!

In daily life, the watch is placed next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and the magnetic buckle is opened and closed by a woman's handbag, and the magnetic buckle is used by a man's mobile phone sleeve may make the watch magnetic, which will cause the watch to be inaccurate or temporarily stopped.

After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to return to normal.

Refrigerator, speakers.

electric blankets and much more.

The watch should avoid being close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men use mobile phone covers to turn on and off magnetic buckles, which may make the watch magnetic, causing the watch to run inaccurately or temporarily stop.

Mechanical watches need to pay attention to magnetic avoidance: watches should avoid approaching magnetic fields, such as placing them next to electrical appliances (such as stereos, refrigerators, computers, etc.) or magnetic objects (such as magnets, mobile phones) that generate magnetic fields.

Nowadays, there are many anti-magnetic watches, but the so-called anti-magnetic watches are not all parts of the watch are anti-magnetic, only the main parts, such as the balance, hairspring, spring and other parts made of anti-magnetic materials. Although it is an anti-magnetic watch, it can only serve a preventive role, so you should avoid placing the watch next to electrical appliances or magnetic objects that generate magnetic fields.

Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, and when the hairspring is magnetized, the watch will stop immediately. Magnetized watches may not see any problems in the short term, but as time goes by, it will become slower and slower.

Methods of anti-magnetization of watches:

1. In daily wear, you should try to avoid exposing the watch to an environment with a large magnetic field.

2. Avoid getting too close to some satchels with magnet buckles.

3. Avoid putting it together with some magnetic appliances such as mobile phones, TVs, computers, etc.

Degaussing method: 1, if the watch is magnetized, you can take it to the customer service center or the watch repair master, test it on the meter to know the problem, do not need to open the cover, directly use the demagnetizer for demagnetization, the watch can immediately return to normal.

2. If it is inconvenient to maintain it far away from the watch shop, you can find a piece of iron (ring) that is in the shape of a circle in the middle and is not magnetized, put it on the table, and slowly wear the watch through the iron circle, and the magnetism on the watch will be absorbed by the iron;

3. Put the watch on a clean iron plate without magnetization, so that the magnetism of the watch will gradually disappear after two days, and demagnetization can be carried out by going to a watch repair shop.

Extended Materials. First, use a compass to put it next to the table to see if the compass has a slight fluctuation, if there is a magnetization, otherwise it is not magnetized.

Under the influence of magnetic force, the mechanical parts are attracted by the magnetic force, and the gears will of course not turn. After the magnetic force is gone, the machine can move around on its own again. However, because the mechanical parts in the watch are close to the magnet, they will be magnetic, so the rotation process will be greatly affected, and it is obvious that the watch is slow.

Using a shaker does not magnetize the watch.

1. Do not overuse.

Long-term stop will cause damage to the watch movement, and the gear will be damaged if it does not run for a long time, so long-term continuous walking will naturally cause wear and tear on the gear, shorten the service life, and the barrel has been in a tight state over time, which will cause the collapse over time. Under normal circumstances, it is ideal for automatic watches to be wound to 80%-90%.

Second, the strength of the meter shaker is very important.

The shaker is to achieve the function of automatic winding by turning the motor, some of the shaker motor strength is quite tough, and can only shake mechanically in one direction, and some high-end shaker motors will rotate single and double to set the time, the force just meets the strength of the upper bar, under normal circumstances, it is enough to stop after 800 laps in the set time.

3. The anti-magnetic effect of the meter shaker is very important.

The motor is rotating in the magnetic field to diverge magnetic waves, the quality of the watch shaker is not equipped with a magnetic shield, although the watch now has an anti-magnetic function, but if it is used for a long time, it is inevitable that there is a risk of magnetism, the high-end watch shaker not only sets an anti-magnetic cover in the motor, but also places the watch box with an anti-magnetic cover to resist the external magnetic field, just like a refrigerator to protect food.

Magnetization will cause the watch to run too fast, and the watch balance spring that is often magnetized will be damaged, so it is recommended to take it to demagnetize as soon as possible after being magnetized, and try to stay away from things with strong magnetic objects when wearing.

The watch should avoid being close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men use mobile phone covers to turn on and off magnetic buckles, which may make the watch magnetic, causing the watch to run inaccurately or temporarily stop.

If the watch is subjected to a magnetic field, it will stop moving. Because they are mechanical parts. on magnetism. It will have a great effect. So. Try to stay away from magnetic fields. Hope it will help you. This one.

How to tell if your watch is magnetically copyed:

The watch that was originally worn by the end suddenly became larger, and the first thing to guess was whether it was magnetic. The way to judge whether the watch is magnetized is to use a more sensitive compass, put the compass flat on the table, and then quickly repeat the watch at close range over the top of the compass, such an action also needs to change the watch in a few more directions, and then repeat the hundred, as long as the needle of the compass moves, it means that the watch has been magnetized.

The watch is magnetized:

1.The post-magnetization process of the watch is very simple, the degree does not need to open the cover, directly use the demagnetizer to demagnetize, and the watch can return to normal in 2 seconds. (Please pay attention to the method when using the degausser, if you demagnetize too much, the watch will sometimes go faster or slower, and it is best to leave it to a professional).

2.Find an unmagnetized iron ring, place the watch in the ring, wear it slowly, and after a few minutes, the watch will be demagnetized and restored.