What are some tips for driving at night? What are some tips for driving at night?

Here's how to check the owner of the license plate number:1. You can dial "114" for inquiries.

3. Find an insurance company, know the license plate number and want to query the name of the car owner, you can go to the insurance company with valid documents, and you can apply to query the name of the car owner according to the other party's license plate number.

Generally, the first two methods are used, because insurance companies are reluctant to disclose the personal information of car owners for the sake of privacy.

Some drivers may have heard about the experience of driving at night"Go gray and not white, and slow down when it is dark"Such a sentence. The general understanding is that white is stagnant water, black is potholes, and normal pavement is gray. Actually, this understanding is not entirely correct.

From a scientific point of view, the light will diffuse reflection when it hits the dry road surface, and we can see the road surface, which is generally gray. If there is a pothole in front of the road, the light will not reflect back after it has passed, so the pit we see is black. As for the waterlogged pavement, it may be white or black.

Because the surface of the water is like a mirror, when the light hits the surface of the water, it will reflect to the opposite side as if it were a mirror. Therefore, when your headlights shine on the surface of the water, the light is reflected to the opposite side, and you can't see the reflected light, only see black, and the oncoming car on the opposite side will be pierced by the reflected light. On the contrary, when there is a light in front of our vehicle that hits the stagnant water, the stagnant water we see is white.

In general, if the light hits the road surface, it is a normal road surface if it is gray; If it is black or white, it is an abnormal road surface, either a pothole or a waterlogged surface.

When driving on mountain roads at night, you can judge the current road conditions or the situation of the vehicle in front of you by the headlights. If the projection distance of the light changes from far to near, it means that the terrain in front of you has become higher, that is, it is going uphill. On the contrary, when the projection distance of the headlights changes from near to far, it means that the terrain in front of you has become lower, indicating that it is already on a downhill or entering a gentle slope.

If you see the light off the road, it means that there is no road ahead, indicating that the vehicle has reached the top of the slope or there is a sharp bend ahead. When you see a light move from the middle of the road to the side of the road, it means that the road ahead is turning. If the light is moved from one side of the road to the other, the road ahead is a continuous curve.

If the oncoming vehicle is emitting a shorter light, it indicates that the vehicle is ready to go uphill. If the light from the oncoming vehicle does not reach the road, it is ready to reach the top of the slope.

When learning to drive, traffic laws clearly stipulate that the speed of driving at night must not exceed 80% of the normal speed limit during the day. Due to the weak light, the person's field of vision is also smaller than that of the day, and if the field of vision changes from dark to light, it will take a certain amount of time to adjust. Therefore, when the road conditions are bad, such as curves, bridges, and sloped road sections, special attention should be paid to slowing down the speed, and when the line of sight is poor in bad weather such as rain, snow, and dense fog, special attention should also be paid to slowing down the speed of the vehicle, so as to brake in time in case of situation. ‍‍

The visibility of objects on the road at night varies according to the color of the object, white and yellow are easy to identify, and blue and gray are not easy to identify, so the night color of non-motorized vehicles and pedestrians cannot be ignored in driving.

Familiar with the use of lights: driving at night, car lights are extremely important, it is important to be familiar with the functions of the headlight switch, learn to judge the various positions of the headlight switch through the dashboard display, and be familiar with the use of various lighting environments, especially the use of far and near beams.

Cars are driving in the same direction, and the main vehicle in the front scene changes through the convex and concave shadows, causing the driver of the rear car to have a bad perception of the road terrain or misunderstand the real situation of the features. If you mistakenly think that a vehicle with tail lights is parked far away in front of you and think that it is driving, and you find that you are too late to stop and cause a collision.

When driving at night, the rear lights are irradiated, and the rearview mirror in the front car reflects the light or is irradiated by the strong lights of the opposite car when meeting the car, which makes the driver dazzled, his vision decreases, and he cannot see the surrounding situation in front of the car clearly.

Observing road conditions and traffic conditions at night is more difficult than during the day, and they tend to get tired visually, and they will consciously drive according to their usual memories of road conditions.

When a car is approaching a poorly lit or dark place with poor visibility and a pedestrian suddenly crosses the adjacent lane and crosses the street, it is dangerous.

It is 5 kilometers slower than the average during the day, the distance between cars is wider, the turning speed is slow, and there is a potential risk of not being able to see clearly.

It is safest to drive slowly and steadily.

The specific tips for driving at night are as follows:

1. If you encounter an oncoming car while driving at night, do not step on the brake pedal for a while, and hit the wheel to the right for a while, and pay attention to pedestrians and bicycles on the right side.

2. When 150 meters away from the oncoming car, the high beam should be changed to low beam, if the other party does not change to low beam, should immediately slow down and continuously use the method of changing the far and low beam to signal the other party; If it still does not change, you should slow down and stop to the right to avoid it, and do not use strong light to shoot at each other, so as not to damage the vision of both parties and cause a car accident.

3. When driving at night, pay attention to pedestrians crossing the road from the left. In busy traffic areas of city roads, there are sometimes oncoming lanes filled with cars waiting for a red light, and in this case, pedestrians often cross the road from left to right from the gap in the convoy.

4. Strictly control the speed. This is a fundamental measure to ensure the safety of driving at night. Due to the low volume of traffic on the road at night, less interference from pedestrians and bicycles, and the psychological state of the driver, it is generally easier to drive at high speeds, so traffic accidents are likely to occur.

Drivers should be fully aware of the dangers of driving at high speeds at night.

5. When driving at night from bright to dark, the eyes have an adaptation process, so the speed must be reduced, and the speed should be reduced and ready to brake or stop at any time when driving through curves, slopes, bridges, narrow roads and places that are not easy to see; When driving through busy streets, it is also necessary to drive at a low speed due to the impact of neon lights and other lights on the driver's vision; In case of bad weather such as rain, snow and fog, it is necessary to drive carefully at low speed.

First, when driving at night, you must use the high beams correctly, and you are not allowed to use the high beams when you are 150 meters away from the oncoming car. I remember the first thing our coach did when he took us on the road was to teach us how to deal with the legendary "High Light Dog". When encountering high beams shining on the eyes, there will be a blind spot, we must stare at the side line on the right side of the road as a reference when driving slowly.

Because this position is the easiest place to judge the position of the vehicle and whether there are pedestrians in front of it in this case, and this position is not a blind spot. If you have a traffic accident because someone else uses high beams, as long as you have a dashcam as evidence, it can be confirmed that it was caused by the other party, then the other party is fully responsible.

Second, there is a saying that if you go gray or white, you will stop when it is dark. What does this sentence mean, when our headlights shine on the road, the normal road surface is generally gray due to the diffuse reflection of the road surface material. If there is a white reflection, it must be that there is standing water on the road, and the water will reflect the light like a mirror and it will look white.

When the headlights shine on the black road surface, it means that the lights are not diffusely reflected, and there may be large potholes in front of the road surface and so on. Teach you a trick, when driving in complex non-paved roads, try to follow the wheel prints of large trucks, large trucks are old cars, they will generally pick a place with relatively good road conditions. We're not familiar with the road conditions, and it's right.

Third, driving at night, it is best to drive in the middle lane, after all, you are not everyone driving very carefully, some drivers or electric cars that play with mobile phones while driving, suddenly string out at the intersection, it is very dangerous, in the middle lane can reserve more emergency space for our novices.

Be sure to learn the simulated lights at night, and pay attention to the use of lights when driving at night.

Precautions for driving a night train.

1. Control the speed. At night, there is less interference from pedestrians and non-motorized vehicles, so it is easy for car owners to drive at high speeds. However, the light on the road at night is not enough, so when driving to a place where you need to turn or where you can't see clearly, such as a slope or a narrow road, be sure to reduce your speed.

Similarly, slow down when driving from light to dark, as the eye needs a process of adaptation.

2. Switch the low beam and high beam in time. When two cars are 150 meters apart, the high beams should be cut into low beams, which is driving etiquette and for driving safety, if the other party does not change the low beams, they should immediately slow down and switch continuously to remind the other party. If you really encounter someone who doesn't have the quality to keep the high beam, try not to get angry, if you feel that the light is dazzling and you can't recognize the road, just pull over for a while, don't be angry and shoot with strong light, you can't do it!

Safety first!

3. Try to avoid overtaking. When you must overtake, you must continuously switch the high beam and low beam to inform the vehicle in front, and be sure to observe whether there is an obstacle on the right side of the vehicle being overtaken. When encountering a large truck, how far away can you be, for the sake of safety, do not rob it.

4. Avoid fatigue driving. Needless to say, the dangers of drowsy driving are well understood. But if you run a long distance on the highway, there is no one to accompany you, and there is a long and boundless road in front of you, and the driver feels that it is inevitable to lose energy.

At this time, it is recommended that car owners and friends can listen to some lively songs to refresh themselves.

When the opposite car is coming, because the other party's light is stronger, you can slow down and look at the direction of the extension cable of the right light of your front car light when your eyes can't stand it

First of all, you need to continuously change the high and low beams to signal the other person to use the low beams.

You can see if the old driver does this.

Also, don't look at the other party's lights, and then turn on more and be proficient, you can be the same as the old driver.

Learn to judge the road conditions, the speed should not be too fast, learn to use lights, drive at night with the principle of gray and not black, and drive in bad weather.

If you feel that the engine sound becomes muffled and the speed slows down, it means that the driving resistance has increased and the car may be driving uphill or on soft surface. If you feel that the engine sound becomes lighter and the speed of the vehicle increases automatically, it means that the drag is reduced during driving, and the car may be driving on a downhill road.

When driving at night, it is common for pedestrians to cross the road from left to right, and in busy traffic areas of city roads, there are often pedestrians running out of the gap between the convoy and crossing the road from left to right.

Correct operation

On nights when there is no moonlight, the road surface is generally grayish-black, and the outside of the road is black, and the puddles will appear brighter, and the potholes will be darker. In addition, it is necessary to accumulate experience in judging the terrain according to the changes in the headlight column, such as the light pillar becoming shorter may encounter a curve or uphill road, the light pillar becoming longer may also be a downhill road, and the light pillar may have a gap in the road potholes, etc.

Rainy and snowy weather is more troublesome for drivers, and the water on the road will reflect the light, and the lane markings will not be seen clearly. At this time, it is best to follow the car, and it is easier to follow the vehicle in front of you with the low beam on, and the distance between the cars is not too far. If you don't have a car to follow, you can only drive slower, and there will always be some people with good driving skills who will overtake you, and then you can follow the car again.