Where to set the formula reference cell 10 in the worksheet

Absolutely quoted. Absolute cell references in a cell (e.g. $f$6) always reference cell F6 at the specified location. If the position of the cell where the formula is located changes, the absolutely referenced cell remains the same.

If you copy a formula with multiple rows or columns, the absolute reference will not be adjusted. By default, the new formula uses relative references, which need to be converted to absolute references. For example, if you copy an absolute reference from cell b2 to cell b3, it is the same in both cells, both are $f$6.

Relative references. The relative cell reference in the formula (e.g. a1) is based on the relative position of the cell that contains the formula and the cell reference. If the position of the cell in which the formula is located changes, the reference changes as well.

If you copy a formula in multiple rows or columns, the references are automatically adjusted. By default, the new formula uses relative references. For example, if you copy a relative reference in cell b2 to cell b3, it will automatically adjust from =a1 to =a2.

Mixed references. Mixed references have absolute and relative columns, or absolute and relative columns. Absolute reference columns take the form of $a 1, $b 1, etc.

Absolute reference lines take the form of a$1, b$1, etc. If the position of the cell in which the formula is located changes, the relative reference changes, while the absolute reference does not change. If you copy a formula in multiple rows or columns, relative references are automatically adjusted, while absolute references are not.

For example, if you copy a hybrid reference from A2 to B3, it will be adjusted from =A$1 to =B$1.

When you enter formulas in Excel, you can simply switch between relative and absolute references of cells as long as you use the F4 key correctly. Here are some examples.

For a cell, the formula entered is "=sum(b4:b8)".

Select the whole formula and press the F4 key, the content of the formula changes to "=sum($b$4:$b$8)", which means that the horizontal and vertical cells are absolutely referenced.

Press the F4 key for the second time, and the content of the formula will change to "=sum(b$4:b$8)", which means that the horizontal line is absolutely referenced, and the vertical line is relative to the reference.

Press the F4 key for the third time, and the formula will change to "=sum($b 4:$b 8)", which means that the horizontal line is referenced relatively, and the vertical row is quoted absolutely.

When the F4 key is pressed for the fourth time, the formula changes back to the initial state "=sum(b4:b8)", that is, the cells in the horizontal and vertical rows are all relative references.

I don't really understand what you mean.

Any cell in the worksheet can refer to the formula.

In the case of not changing the formatting of cells to text, those that start with = are considered formulas.

For example, A1 enters 8

If you write =A1 on A2

Then a2 shows 8, and =a1 is the reference of a2 to cell a1.

Directly use shift and left-click to refer.

1) Start Excel 2013 and open the worksheet, select an area with the same size as the cell area you need to merge in the empty white area of the worksheet, and then click the "Center After Merge" button in the "Alignment" group of the "Start" tab to merge the cells, as shown in Figure 1.

Tip: If you need to merge cells in multiple rows or columns, hold down the "Ctrl" key to separate the album, click to select the cells in these rows or columns, click the lower triangle button on the "Center after Merge" button, and select the "Merge Across Span" option in the drop-down list that opens.

2) With the merged cells selected, select the Format Painter tool in the Clipboard group of the Start tab to merge the range of cells that need to be merged as shown in Figure 2.

3) At this time, the cell range will be merged, and excel will not give a prompt to delete the cell data, and all the cell data will be retained. For example, enter a formula in a blank cell that references the cells that have been merged, as shown in Figure 3. After pressing the "Enter" key, the data in the cells before merging is still there as shown in Figure 4.

In Excel, there are two ways in which cells can be referenced: absolute and relative. Here's how to guess how to set how a cell is referenced:

1.Relative References: Relative references are the default way to refer to cells.

In formulas, relative references use column letters and row numbers to refer to cells. For example, the formula "=A2+C2" in cell B2 uses a relative reference because it automatically adjusts to adjacent cells, such as the formula "=C3+E3" in D3.

2.Absolute References: Absolute references are used to lock cells in formulas so that they don't change with the copy and paste of formulas.

In a formula, use the dollar sign ($) to lock the columns or rows of a cell. For example, the formula "=$a$2+$c 2" in cell b2 uses an absolute reference because it locks the column of the first cell so that the row number does not change to other columns when copied, but the row number is still relative, so when copied in d3, the row number is updated to "$c$3".

To set the way cells are referenced, you can follow the steps below:

1.Select the cell for which you want to set the reference method.

2.Enter the formula in the formula bar and lock the column or row with the dollar sign ($) where you want.

3.Press F4 to cycle through relative, absolute, and mixed references.

4.Press Enter to complete the setting of the formula input and reference method.

You can also manually enter the dollar sign ($) to set how the cells are referenced. For example, use $a$1 to lock cell A1.

In Excel 2007, you can use the following formula to implement the inscription requirements (as an example of the data in the following figure):

Same as ** in:=indirect("a"&row()*20+row())

Different**Medium:Note:If the line in the formula is not in the first line, you need to modify it according to the actual position of the line.

For example, if the inscription is used, the formula can be changed to:=indirect("'sheet72'!a"Zheng Weiwu &(row()-4)*20+row()-4).

The result of the formula is shown in the figure below:

A graphical representation of the data and the results of the formula in the same table.

Diagram of the different table formula and the result of the modified formula.

Enter or copy one of the following formulas in i5.

index(b!d:d,row(a1)*21)indirect("b!d"&row(a1)*21)offset(b!d$1,row(a1)*21-1,) pull-down eggplant grip filling.

The typical remuneration is small and the topic is complex. None of the data in your table b is of the standard type, and you have to locate the number of rows from the word "total".

In Excel 2007, the following formula can be used to implement the requirements of the careful inscription (the following hail branch land chart **data is the source example): the same ** in the difference ** Note: The line number in the formula is based on the line (the first line) where the formula is located...

It is recommended that you use this formula:

offset(b!d$21,(row(i5)-5)*21,0,1,1)

This can be done with the vlookup function. Sequence the number in the price list as the first column and sort by number. Another worksheet also starts with the number, and the cells in the unit price column of the table use the vlookup function.

The parameters of vlookup and their meanings are as follows: 1. lookup value: the value that needs to be searched in the first column of the data table, which can be written as a2 (in this case, it is the "number" cell of the same row); 2、table_array：

An information table in which you need to search for data. (In this example, the price list contains all rows of number and unit price columns) 3. col index num: the column sequence number of the cells that meet the conditions in the array area, and the first column sequence number is 1; (In this example, the column number of the unit price column in the price list) 4, range lookup:

Specifies whether an exact match or a rough match is required at the time of the lookup. If false, it is a rough match; If true or ignored, it is an exact match. (in this case, it should be true or ignored) in the format above.

For example, if you want to enter the contents of cell d5 in sheet2 in cell d3 in sheet1, enter "=sheet2!" in cell d3 in sheet1d5 "Attention,"" I entered it to emphasize the content, don't type it when you do **.

First drag the selection, then re-a1-zn sum, keep dragging it down, it automatically sums.

The easiest way for you to do this is to use the vlookup formula. You can take a look at the Excel instructions that come with it and try it, if it doesn't work, send it to me to help you do it.

The A1:B1 area of cells has entered data sequentially.

Calculation: Enter =a1+b1 in d2 to find the sum of 5 and 10.

Enter =a1-b1 in d3 to find the difference between 5 and 10.

Enter =a1*b1 in d4 to find the product of 5 and 10.

Enter =a1 b1 in d5 to find the quotient of 5 and 10.

Enter =a1 3 in d5 to find the cube (cubic of 5) and =b1 (1 3) in d6 to find the cube root of 10.

The operation formula with the equal sign entered in cell D2:D6, which is called a formula in Excel, is the basic operation in mathematics, but the operation symbol on the computer has changed - the same as "*", "the same as "same", "the same" and "the power", the square is the inverse operation of the power, and the power and the exponent are used as fractions to become the number of the square operation.

When using formulas for calculations, some formulas are easier to use the built-in functions in Excel, such as the formula =A1+B1 can be replaced by the summing function sum, i.e. =sum(A1:B1) (when there are many added numbers, the advantages of using the cell region where the data is located to express these numbers in detail).

To sum up, the formula calculation in excel is consistent with the formula calculation in mathematics, and the left side of the formula in mathematics is replaced here by the cell address where the formula is entered. For example, the first formula can be denoted as d2=a1+b1. In formula calculations, referencing the paste function (a built-in function in Excel) can make the formula simpler.

Hope it helps your understanding of formula calculations!

In Excel, referencing data from other header worksheets can be done in two ways:

Use "=sheetname!".celladdress". In the loss, "sheetname" is the name of the worksheet to be referenced, and "celladdress" is the address of the cell to be referenced.

For example, if you want to reference the A1 cell data in a worksheet named "sheet2" in a worksheet named "sheet1", you can enter "=sheet1!" in the cell of "sheet2".a1", and press enter.

Use the mouse to drag and drop to make a reference. Select the cells you want to reference, and then enter "=" in the input box, then click the cells of the worksheet you want to reference, excel will automatically fill in the reference formula for you. For example, select the cells you want to cite data, enter "=" in the input box, switch to the worksheet you want to reference, select the cells you want to reference in the worksheet, and finally press the enter key to complete the reference air change.

Whichever way you use to refer, there are a few things to keep in mind:

Both the worksheet name and the cell address need to be entered correctly, otherwise an error will occur.

When referencing data from other worksheets, you need to ensure that the referenced worksheet is open.

If the referenced worksheet name contains spaces or special characters, you need to enclose the worksheet name with single quotation marks, such as "=".'sheet name'!a1”。

With formulas, you can use different data from a worksheet in a formula, or use the data of the same cell in multiple formulas.

Formulas can also reference cells on different worksheets in the same workbook, or data from other workbooks. After referencing a cell, the operation value of the formula will change with the data of the referenced cell.

When the cell data referenced by the slag is modified, the operation value of the formula will be automatically modified.

There are two ways to reference a cell:

Enter the column label and row label number of the cells to be referenced in the calculation formula, for example, A3 (representing the remaining 3 cells in column A) and A1:B5 (representing all cells from Al to B5).

When the formula is calculated, you can also directly click to select the cells that need to be referenced, and Excel will automatically add the selected cells to the calculation formula.