Elantra wiper is good, Elantra wiper blade size

The wiper itself is a wearing part, the most important thing is the safety of your driving process, and the small wiper is actually the smallest part on the body that is not easy to attract attention. In fact, the wiper is too important in high-speed driving, especially in rainy days, so it is recommended that you use a better brand and performance, which will reduce the probability of traffic accidents.

Check once every 6 months and replace it once every 12 months.

It is still recommended that you choose a brand wiper or the original factory matching, so that it is safe and worry-free!

Domestic suggested use: Meitu, imported available: Dr., Champion, Valeo and other ordinary bone wipers rely on the skeleton to make the scraper and the glass fit, due to its structure, it is impossible to make the scraper and the glass fit perfectly, resulting in problems such as unclean scraping, easy wear and tear of the scraper, and loud noise.

Boneless wipers rely on a whole guide strip to disperse the pressure, so that the force of all parts of the wiper blade is uniform, which can reduce the generation of water marks and scratches and achieve a better wiping effect. In addition, it can greatly reduce jitter wear, coupled with the advantages of uniform force, sun protection, simple structure and lighter weight, the life of the wiper motor and wiper blade is at least twice as long as that of the traditional wiper, which is more economical and reliable. Features of boneless wipers:

1. The boneless wiper fits tightly with the curved glass, the force is uniform, and the wiper blade is coated with carbon film to ensure quieter, smoother and cleaner scraping. 2. Designed with aerodynamic principle, the wiper blade will not be lifted by the air flow when the vehicle is driving at high speed, ensuring that the scraping is clearer. 3. Optimized wiper structure design, the middle strip is flat and wide, which has the effect of shading and anti-aging.

4. Adopt skeleton-free floating steel plate structure to eliminate motion trembling. Long life, light weight, stronger adhesion than traditional wipers. 5. The rubber strip and covering spring sheet are made of rubber with strong ozone resistance and ultraviolet resistance to adapt to different climatic conditions.

The wiper is generally a bone wiper, and the problem of this kind of wiper is that the noise is not clean, especially the light rain. It is recommended that you buy a pair of boneless wipers, what famous brand Bosch is too expensive and there are many fakes There is no need for that. **You can use a pair of more than 20 yuan without freight.

Because the wiper is used for half a year. Buy 2 pairs of wipers at a time, at least you don't need to replace them for 1 year, plus shipping does not exceed 50 yuan.

I haven't heard of it, but it's good, it's good, it's good, but most of the ones sold online are fakes.

The size of the Elantra's wiper blades is: boneless main 20 inches, secondary 18 inches.

You can use a ruler to measure the length of the wiper strip, of course, the user manual of some models is indicated, and you can buy it directly according to the above dimensions. It is worth mentioning that the wipers are divided into one long and one short, usually a little longer in the main driving position, so you should not install it wrong when you install it.

Wipers are also available in different sizes, after all, the glass size design may be different for different models. If you choose a smaller wiper, the working area of the wiper will definitely become smaller, resulting in rainy days.

There are more blind spots, which affects the view of the car.

Driver's wiper size: 20 inches, passenger wiper size: 18 inches.

Wiper blades of 18 and 20 are 18 and 24

Elantra and Yuedong wipers can be sharedElantra is a typical Korean car, as Hyundai's best model in overseas sales performance, it has gone through six generations, Beijing Hyundai Elantra is based on its sixth-generation model, slightly improved according to China's road conditions and climate environment, and has been praised for its rich configuration and relatively high cost performance.

Presentation of the ElantraThe interior lines of the Elantra are relatively simple, the beige color matching looks very fresh, and the center console and the armrest of the door are also well matched with matte metallic trim plates, which looks very fashionable, and the texture of the plastic parts of the instrument panel is acceptable, which does not give people a particularly cheap feeling, of course, if you pick faults, the assembly quality in some places is still not good.

The length, width and height of the Elantra are 4495 mm, 1720 mm and 1425 mm respectively, and its wheelbase reaches 2610 mm, which is quite outstanding in the same class of cars, and its interior space is also the first-class level in the same class of cars.

How to open and use modern motion sensor wipers.

Clean the front windshield: simply pull the joystick in the direction of the owner.

Hi is high-end, Lo is low-grade. In actual driving, the owner can adjust the desired gear according to the amount of rainfall.

Use the control button in the middle of the shift lever to adjust the operating frequency of the wiper in the int position.

The "off" on the gear lever indicates that the wiper is off, and the wiper stops working when you shift to this position.

Fog: If the wiper swings once, the lever will automatically rebound.

Precautions for using wipers:

1.Keep it clean.

If there are stripes on the windshield of the wipers, the wiper blades are dirty. You can sprinkle alcohol on a towel to wipe the surface of the wiper blades. Cleaning once a month can improve the working effect of the wipers.

2.Check the rubber.

If the wiper strip cracks or hardens, it will make a piercing squealing sound. If the wear is not particularly severe, the owner can use sandpaper to sand the uneven surface.

3.Avoid exposure to sunlight.

When you don't use your vehicle for a long time, try to park it in a cool place. Especially in the hot summer, many people park their cars outdoors to bask in the sun. As a rubber product, the temperature of the wiper blade is its number one public enemy, and it is more likely to undergo qualitative changes at this time.

4.Replace fluids.

Note that clean water is not a substitute for a glass of aqueous solution. In order to extend the service life of machine parts, it is necessary to use a conventional glass water cleaning fluid. Pay attention to the remaining amount of glass water and replenish it in time.

5.Remove frost.

After the heavy snowfall, the wipers of the vehicles in the open air froze. At this time, the frost on the glass surface should be cleaned manually. Forcibly opening the wiper will not only cause the mechanical structure to bend and deform, the wiper blade will be damaged, the glass will be scratched, and in severe cases, the wiper motor will be directly burned.

The 2022 Elantra wipers measure 2418 inches and feature a dedicated interface. The manufacturer did not specify the specific replacement cycle. If the wiper is unable to clean the water stain from the beam source, a new one should be considered.

Elantra wiper replacement procedure.

Take the front of the car as the force guide and break the wipers. When the wiper arm swing slag is excited to a certain position, it will be automatically fixed. Press the fix button of the wiper blade while holding the wiper blade and shaking it upwards to remove the old tape device.

Note: When you put the wiper arm back, handle it with care, otherwise it is easy to break the glass. You can put a towel on top of the glass to prevent scratching the glass. )

Loosen both buckles and remove the original tape. (Do not use too much force when opening the fastener, and do not disassemble the plastic parts at both ends.) )

When installing a new rubber strip, stagger the two metal pieces up and down so that the rubber strip can be inserted back in and put back into the first slot. The installation process of the new tape requires a certain amount of hands-on ability and patience. Install one side first, then the other side.

After successful installation, install the wiper grip in the reverse order of the removal process, and the wiper can be successfully replaced.

Note: The wiper disassembly process of some models is complicated, which tests the owner's hands-on ability. Car owners can use the included manual to read carefully before replacement. If the problem cannot be solved, it will be handed over to a professional master to replace.