What are the holes in the sieve for sieving pepper seeds?

The sieve of the flower is generally a hole with a diameter of 2mm. This sieve can make the peppercorns leak better.

In general, the dice of peppercorns can be made into well-3 mm holes on the basis of peppercorns.

Plug the big hole of the plug of the pepper seeds, you can compare it with your own peppercorns, as long as it is more delicate than the flowers. Bigger, and then you can leave those defective products to be leaked. This thing is generally about 3mm.

Do you want to know how big a hole is in the sieve for stuffing pepper seeds? It must be a relatively small arch, two square millimeters large, it's about the same, I'm talking about the building square, two millimeters may be counted as four square millimeters.

How big is the hole in the plug of the watering nine plug peppercorns? The sieves for sieving pepper seeds are very dense and dense, with very small holes, and they will not leak down according to the pepper group. Not too big things don't leak down, and hairspray paper can leak down.

What are the holes in the sieve for sieving pepper seeds? According to the size of the peppercorns, you have to choose how big the hole is needed for the plug of the peppercorns, so that the peppercorns can not be missed in the process of sifting peppercorns.

3mm to range, according to the use of different purposes, the aperture is not the same, experienced masters will give the selection, directly say how to use, pick out the easy to use.

If you sift the pepper seeds, I think the size of the hole where the pepper seeds fall should be at least 3mm.

How big is the hole plug of the peppercorn, and the hole should be a few tenths of a millimeter, and the hole of a few tenths of a centimeter is better to plug.

3mm to range, according to the use of different purposes, the aperture is not the same, experienced masters will give the selection, directly say how to use, pick out easy to use, I will do this.

What should be the number of items to go to the ** shop that sells sieves and ask.

Mesh, which is physically defined as the particle size or coarseness of the material, is generally defined as the number of holes in the screen within 1 square inch.

The mesh size corresponds to the standard mesh.

Sieve hole size: Standard mesh: 4 mesh.

Sieve hole size: Standard mesh: 5 mesh.

Sieve hole size: Standard mesh: 6 mesh.

Sieve hole size: Standard mesh: 7 mesh.

Sieve hole size: Standard mesh: 8 mesh.

Sieve hole size: Standard mesh: 10 mesh.

Sieve hole size: Standard mesh: 12 mesh.

Sieve hole size: Standard mesh: 14 mesh.

Sieve hole size: Standard mesh: 16 mesh.

Sieve hole size: Standard mesh: 18 mesh.

Sieve hole size: standard mesh: 20 mesh.

Sieve hole size: standard mesh: 25 mesh.

Sieve hole size: standard mesh: 30 mesh.

Sieve hole size: standard mesh: 35 mesh.

Sieve hole size: standard mesh: 40 mesh.

Sieve hole size: standard mesh: 45 mesh.

Sieve hole size: standard mesh: 50 mesh.

Sieve hole size: standard mesh: 60 mesh.

Sieve hole size: standard mesh: 70 mesh.

Sieve hole size: standard mesh: 80 mesh.

Sieve hole size: standard mesh: 100 mesh.

Sieve hole size: standard mesh: 120 mesh.

Sieve hole size: standard mesh: 140 mesh.

Sieve hole size: standard mesh: 170 mesh.

Sieve hole size: standard mesh: 200 mesh.

Sieve hole size: standard mesh: 230 mesh.

Sieve hole size: standard mesh: 270 mesh.

Sieve hole size: standard mesh: 325 mesh.

Sieve hole size: standard mesh: 400 mesh.

"Mesh" is the unit of mesh size.

The mesh size of the 100 mesh screen is:

The number of mesh or mesh is the number of mesh holes per square inch (1 inch width. For example, 50 mesh means that there are 50 eyelets per square inch.

The larger the mesh number and the more holes, the finer the particle size and the smaller the particle size of the material; The smaller the mesh number and the fewer the holes, the larger the particle size and the larger the particle size.

Each country has a standard screen number specification, and the allowable deviation of the screen hole size corresponding to each screen number in the specification is limited.

"Mesh" refers to the number of holes in the screen within 1 inch, for example: 100 holes in one inch, that is, 100 mesh.

The same aperture, different wire diameter, will affect the number of holes in the same length, the number of mesh will change.

Please refer to the screen comparison table below.

The aperture depends on the wire diameter of the monofilament, which is generally 178 m to 201 m.

The main properties of the stone and the results of screening.

Main properties Apparent density (kg m3) Crushing index (%): needle flake content (%), mud content (%), mud content (%)

Sieving results Sieve hole size (mm).

The actual cumulative sieve residue (%) is continuously graded, and the maximum particle size is 20mm

Looking at the drawing, the instructions in front of the drawing will give a specific screen hole size.

Mesh number and pore size comparison table.

1 um 1 micrometres (μm) millimetre (mm).

Mesh inch Mesh diameter (um) 30 600

160 mesh refers to 160 sieve holes arranged in a straight line at a distance of one inch. 1 inch = millimeter.

Extract a wire from the screen and measure it with a micrometer and set its diameter to n mm, then the diameter of the mesh 160 mesh is.

160=m, 160 mesh screen should be called filter, which is to filter liquid gases, the pore size is very small, and it is almost invisible with the naked eye. We measured it once, and it was stainless steel, about millimeters, which is the diameter of a human hair.

160 mesh means that there are 160 holes in one square inch, so each inch of length is the hole, and the diameter of each hole is, so the hole diameter is 2 mm.

I checked the information and showed that it was in between.