What equipment is better for heating in winter? Why is it good? What are the advantages?

If it is central heating in the north, both the installation cost and the use cost are smaller than that of electric floor heating.

If it is not the central heating in the north, it is relatively better to use Wanjia heating cable electric floor heating.

The advantages of Wanjia heating electric floor heating.

1) The thermal comfort meets the physiological requirements of the human body, the foot temperature is cool, and the temperature gradually decreases slightly along the height direction; Indoor environmental hygiene.

2) If there is no human destruction, the service life can be more than 50 years, and the service life is long.

3) Save indoor land occupation and increase indoor usable area by 2 3%.

The difference between electric underfloor heating and water underfloor heating can also be logged on to the blog.

Hope that helps.

Underfloor heating is better! By the way, I was able to do domestic hot water, too! Comfort is the key, everything else is a virtual ......

It depends on what kind of way your community allows you to use, the general old-fashioned central heating, wall-mounted, underfloor heating. I think the central heating is still better, clean, and the constant temperature in the house is good. The wall-mounted design for the central heating can not be burned for a long time before the home can be kept at a constant temperature, but you are not at ease when there is no one at home.

Some floor heating communities are not allowed, and the requirements for laying are high, and it is not easy to repair.

One: wall-hung boiler.

The wall-hung boiler is also a kind of heating equipment commonly used in many families, it can flexibly regulate the indoor temperature, the wall-hung boiler on the surface is equipped with an intelligent control system, which can be set to automatically adjust the temperature, so that you feel very warm when you get home from work, very practical, the appearance of the wall-hung boiler is exquisite and small, and does not take up space.

Two: air conditioning. Air conditioning is divided into household air conditioning and commercial air conditioning, its main function is heating and cooling, but in the northern region generally use air conditioning for heating, which is mainly to meet the needs of summer refrigeration, on the one hand, because its heating comfort is not very good, on the other hand, its energy consumption is high, not very suitable for household use.

Three: electric heaters.

Electric heater is a small heating equipment, its main advantages are small, convenient, ready-to-use heating, very flexible to use, it is also very affordable, for the average family, can be easily purchased, but its disadvantages are also very many, such as safety, very easy to fire and other dangers, so this heating equipment is generally used for temporary heating is more suitable.

Four: central heating.

This heating mode is mainly used in densely populated areas of cities and towns, and there is the coverage of municipal pipe network to meet, its advantage is convenient, safe, we only need to pay a certain heating fee to meet our winter heating needs, but its disadvantage is that rural family users can not use.

Five: air can be used for heating (most suitable for home use).

A new type of heating, it can be applied to homes, shopping malls, office buildings and other environments, and the operating environment is very extensive, whether it is China's northernmost Heilongjiang, or the southernmost Guangzhou area, can achieve heating, air conditioning and domestic hot water demand, and the operation of low energy consumption, intelligent management system, can also save labor costs, so this equipment is more suitable for home heating than other heating equipment.

The air conditioning was a little easier to use. In terms of heating, air conditioning can increase the temperature of the room in a short period of time. In terms of energy saving, the air conditioner is more energy-saving!

Home heating in the north will generally be more suitable for ground heating, and the south will rarely be heated, or use a small sun.

Answer: At present, household heating equipment is recommended to use household heating and cooling machines, which can be arranged according to different ends, which can meet the heating needs, and can also meet the cooling needs in summer according to the different ends.

Presumably, you should have seen some news that you can't withstand the harsh winter and freeze to death, which shows that heating is a very important thing in winter. Looking at the heating equipment on the market, there are many varieties and styles, and consumers usually have no choice.

What is good for heating equipment in winter.

1. Air conditioning. As an early luxury item, and now it has become increasingly popular winter heating equipment, I believe that everyone understands the heating performance of air conditioning, and the consumption of air conditioning on the energy of electric spine is also obvious to everyone. At the same time, the air conditioner has another characteristic when heating:

Air conditioning heating is to concentrate the outdoor temperature and transmit it indoors, that is to say, the lower the outdoor temperature, the lower the heating capacity of the air conditioner. And this is also the limitation of air conditioning heating. The newly launched ** air conditioner on the market has effectively solved the limitation problem of air conditioning heating through a series of technical improvements, and has gradually become the new favorite of modern people's liquid heating in winter.

2. Floor heating. In recent years, it is a new home heating equipment, which is divided into electric heating and water heating, and the water heating is deeply loved by consumers for its warm and complementary heating. At the same time, underfloor heating has excellent heating performance and is a very suitable heating device in winter heaters.

However, the installation of floor heating is extremely complex, and the cost is relatively high, and the floor height of 8cm will be lost during installation, resulting in a certain degree of waste of housing area. In today's shortage of land resources and small housing area, the market occupied by floor heating equipment, which is occupied by winter heating equipment, has been affected to a certain extent by these two points.

3. Electric heaters.

There are many kinds of electric heaters for the same emerging winter heating equipment, and the heating methods used by different electric heaters are also different, but on the whole, the electric heater is petite and convenient, can be moved at will, and at the same time, people's self-regulation is extremely high in the utilization of energy, and the cost is low, it is a very popular winter heating equipment in recent years, and is very expected to become the new favorite of modern new residential winter heating!

4. Wall-hung boiler.

Although the wall-hung boiler with high practicability and high practicability can be divided into halls and rooms for temperature regulation in recent years, the noise generated during its work and the defects of needing to bear the renewal fee and short service life make the market share of the wall-hung boiler limited to a certain extent.

With the development of science and technology, winter heating equipment is far more than the above, but the above are the heating equipment that will be used by the general family, as for what kind of heating equipment is good, it depends on the area of the consumer's room and consumption capacity.

Down gloves. Duck down filling, the inner core is thin down, windproof and warm, especially suitable for cycling.

2.Electric heating grips. The handlebar is connected to the wire, powered by a battery, and you can feel the heat in 1 minute, and the inner core is also thin velvet, and the outer layer is leather, so you can have a warm glove that can continue to heat up on the outside in winter.

3.Neck sleeve. The wind in winter is biting cold, there is a neck sleeve close to the neck to keep warm from the invasion of the cold wind, and you can also buy a down neck sleeve, which is warmer.

4.Electric blanket. The electric blanket is simply a must-have artifact at home, and the electricity is turned on for a while before going to bed, which can make the bed warmer in the nest and warm the bed in winter, suitable for the south that is not warm and the north where the heating is insufficient.

5.Electric heater. What to do if your feet are cold and your legs are cold, use a small sun to warm up, plug in the electric heating quickly, operate the omelette, small and do not take up space, easy to move, but sometimes the temperature is high and it will feel very dry.

6.Humidifier. When using an electric heater, the temperature is too high and it will be very dry, so using a humidifier to increase the humidity can also reduce the trouble caused by static electricity.

Underfloor heating. Turn on the floor heating, the temperature is high, the air moisture evaporates after long-term use, and the indoor dryness is unbearable.

Radiators.

The appearance is unsightly and conflicts with home decoration; The protruding wall is more obstructive, affecting the placement of cavity furniture; It is angular and easy to bruise children; Easy to blacken walls;

Airpacing. In winter, blowing the air conditioner indoors, I believe everyone has this experience: **dry, throat uncomfortable. Because traditional air conditioners control the indoor temperature through air convection, the feeling of blowing can be uncomfortable, and the indoor temperature will be uneven.

Is there a set of equipment that perfectly solves the problem of indoor temperature in winter?

How to heat in winter, Sanheng system.

The four seasons are like a warm spring day, bathed in gentle sunshine. ”

Sanheng system, adjust the indoor temperature, no blowing feeling, no noise, keep 20-26 all year round. The subversive experience of indoor constant temperature allows you to no longer worry about the cold spring in this early spring.

The temperature difference from head to toe is no more than 2, and the human body feels more comfortable or round. The low-temperature radiation technology of Sanheng system makes the indoor temperature very uniform, and there will be no hot head and cold feet or cold head and hot feet.

Stay away from the dryness of the winter and hydrate your body. ”

24-hour displacement fresh air system, indoor air is replaced every hour, is the guarantee of your free breathing, Sanheng system will keep the humidity in the normal range suitable for human life, avoid typical respiratory diseases in winter, and also make your first time moist and smooth.

Winter heating equipment, finned tube radiator as a more commonly used heating equipment in recent years, its range of use is also very wide, in agriculture, aquaculture and industry and other fields have been widely used. In the planting and breeding industry, the use of finned tube radiators is also more, and then we will briefly understand the finned tube radiators used in breeding. The finned tube radiator for breeding is usually a steel pipe structure, the connected radiator is injected with water or steam, water and steam are used as the heat transfer medium, and the surface of the radiator is the main carrier for heat dissipation, and the temperature in the breeding shed and the planting shed is achieved by heating the air.

Finned tube radiator.

The finned tube radiator for breeding is usually installed on the wall, which is stable and reliable, and is usually installed on the wall by the window, so that the heat can be directly offset by the heat load when the cold air enters, and the heating effect of the radiator will be improved to a certain extent. Finned radiators are made of steel and connected by reliable and stable welding technology, which plays a very important role in agricultural and industrial heating systems. The raw materials of the finned radiator are all steel pipes that meet certain standards, and stainless steel, aluminum and other materials can also be used for processing.

Finned tube radiator.

The processing of finned radiator is determined by actual measurement, the purpose of this is to ensure that the processed radiator can meet the needs of the radiator size in the place of use, and the second is to determine some radiator parameters through measurement, and only the rationality of the parameters can ensure the heat dissipation effect after the radiator is installed. <>

Finned tube radiator.

Installing underfloor heating or installing radiators - comfort is more comfortable than underfloor heating: it is currently recognized as the most comfortable and fashionable heating method. It is heated by low-temperature floor heating, which is "warm and cool", warm and comfortable under the feet, suitable for human body temperature needs; The temperature is balanced, the heat dissipation is uniform, there is no sense of wind, it is not easy to produce floating dust, no noise, and it is hygienic and environmentally friendly.

Radiator: It is a heating method based on convection. The radiator first heats the air around it, so that the air forms a convection flow in the room to achieve the purpose of heating.

This heating method is that the temperature around the radiator is high, with the increase of the distance from the radiator, the temperature decreases, and the temperature difference at the same level is larger, this phenomenon is especially obvious in the large space room, and the comfort is relatively poor.

Installing floor heating or installing radiators - the heating rate is more than floor heating: Anyone who has used floor heating knows that floor heating is slower and generally needs to be turned on 24 hours a day to achieve the best comfort. The reason is that the floor heating uses low-temperature hot water radiation, which dissipates heat slowly, and requires a certain process to heat the room.

Radiator: The heating rate far exceeds that of floor heating, generally open the radiator for about half an hour, you can feel the warmth, and there is no need for long-term heating, you can turn it off at any time, suitable for office workers.

Floor heating or radiators - energy saving is more than floor heating: Although floor heating needs to be heated throughout the day to ensure the balance of temperature, its energy saving degree is much higher than that of radiators. This is mainly because the floor heating adopts low-temperature radiant heat dissipation, and the floor heating has the function of temperature control and temperature regulation, although the opening time is long, but the power consumption is small.

Radiator: The radiator belongs to the air convection heat dissipation, the water temperature is required to reach a certain height, and the radiator has no temperature control device, and the circulation heating is carried out after the hot water is cooled, so the loss of energy is higher than the floor heating 30, and the floor heating has an obvious advantage in the degree of energy saving. Installing underfloor heating or installing radiators - the ease of installation is more convenient than installing underfloor heating.

Radiator: There are two ways of radiator installation, surface installation and concealed installation, and both methods of blank room can be used. The concealed pipeline is hidden, the construction is slightly complicated, and the house that has been renovated can only choose the surface-mounted installation method, and the open-mounted pipeline is walked, and the construction period is short, convenient and fast.

Installing floor heating or installing radiators - installation ** relatively speaking, radiators ** are cheaper than floor heating**, not only the cost is less when buying, but also when installing later, floor heating takes more time than heating, in general, the installation of radiators, Milan spring is a very good manufacturer, as the top ten well-known brands of radiators, is a very trustworthy manufacturer.