Where is the fuse of the Narcissus washing machine?

I used to have a desk in my house, and I remember it seemed to be down there.

If you want to find the box for the fuse, where is it? It's also relatively simple, we just need to follow the power cord and find the fuse box very quickly.

If you can't find the box of the fuse, you can use the multimeter digital multimeter to pull along the wire to the hook, plug in the power and pull forward through the wire to **, the voltage suddenly drops, and the box is in that position.

This aspect should be in the lower right of its control panel, which is relatively normal, so it is completely possible to find this aspect of the word.

This kind of washing machine of Xiaoxian brand should be in the upper right corner, which is very convenient.

If there is a fuse, it must be a mains fuse, which is to install a fuse on the "N" line of the 220V power supply to protect the internal circuit of the washing machine.

If you can't find where the fuse is during maintenance, you can find it along the 220V power cord, there is a small plastic box, and replace it according to the number marked on the fuse, such as "220-2A" is the 220V withstand voltage value of 2 A!

It is with the power cord of the washing machine, and you can see it when you open the back cover of the washing machine.

1. Open the back cover of the washing machine.

2. You will see a black cylinder.

3. Twist the cylinder apart.

4. The inside is the fuse.

Position of the fuse of the washing machine: Open the back seal of the washing machine and look for it along the power cord of the washing machine. A small black rectangular cylinder can be seen with a fuse inside. Power off when replacing, otherwise it is easy to short-circuit and burn out the fuse or circuit.

If one terminal comes loose and hits another terminal, leaving the drain pump not connected to the control circuit, the fuse will blow off as soon as the washing machine goes into the dehydrated state.

Gazelle washing machine QB75 T62YH that insurance is in that position.

Location of the washing machine fuse:

1. Open the back seal of the washing machine and look for it along the power cord of the washing machine;

2. Here you will see a small black rectangular cylinder, which is filled with insurance, and you can open it and replace it.

A fuse, or fuse, is an electrical component that is installed in a circuit to ensure the safe operation of the circuit. Also known as a fuse, the IEC127 standard defines it as a "fuse-link". The fuse (wire) will fuse itself to cut off the current when the current rises abnormally to a certain height and a certain time, so as to protect the safe operation of the circuit.

The back cover was opened and no fuse was found.

The power fuse (also known as the fuse) of the Little Swan washing machine is connected to the phase wire before entering the power supply of the washing machine. That is, the front part of the power switch of the washing machine. The function is to protect the washing machine from high voltage, between the plug and the computer board, the brown line is the majority.

It won't be a glass cylindrical fuse like some appliances. The fuse of the washing machine is generally a fuse resistor on the PCB, which is indicated by the symbol "F". It is shaped like a chip resistor, and some of them are large hand inserts.

The fuse is near the power cord and should be behind the washing machine, and it should be visible when you open the cover on the back.

It won't be a glass cylindrical fuse like some appliances. The fuse of the washing machine is generally a fuse resistor on the PCB, which is indicated by the symbol "F". It is shaped like a chip resistor, and some of them are large hand inserts.

The back cover plate opens, untie the wire, and there is a black cylindrical string attached to the wire, which can be unscrewed, and inside is the fuse.

Generally at the point where the power cord enters the washing machine.

Find the inlet below, there is a contact bandage, and there is a plastic shell inside.

The shock-absorbing spring of the dehydration cylinder is the upper and lower parts of the spring, and the old noisy wire at one end of the dehydration tube is good, and then the lower end of the screw is installed.

Replace the spin-off starting capacitor, about 4uf. Also look at whether there is a water leak, if it leaks, you need to change the water seal, otherwise it will be broken in a few days. The capacitor is about 5 yuan, the water seal is about 10 yuan, and the maintenance fee is divided into regions.

It may be the dehydration timer ring, and this one will cost about 100 yuan. If the belt is loose, then the dehydration timer is still rotating, there should be a sound, and the dehydration bucket is not rotating.

After powering on, the motor has a buzzing sound, indicating that there is already a current to the motor, but because the motor has been damaged, there will be this humming sound, and it is okay to replace it with a new dehydration motor.

My narcissus brand spin dry barrel bottom rubber column is more aging and aging, can I buy it there, please advise, thank you?