The washing machine can be washed, but it can t get water and can t be dehydrated, and the knob of t

1. No water.

1. Turn on the power supply, the ears are close to the water inlet valve for "buzzing" sound, if so, check whether the tap water is cut off, close the faucet, screw out the water inlet pipe joint to check whether the filter screen of the water inlet valve is blocked by foreign objects, and if there is a pull out of the filter screen for cleaning. If the problem is not solved, the inlet valve should be replaced, and the valve core of the inlet valve may be stuck and cannot be opened.

2. If the water inlet valve does not have a "buzzing" sound, you should try to replace the computer board at this time, and the problem may be on the computer board.

2. No dehydration.

1. First check the safety switch, the washing machine is turned on and the program is adjusted to the dehydration state, press the safety switch brake arm to the lowest with your hands or tools, if the computer board alarms and the digital tube shows "E1", the safety switch or computer board should be replaced at this time.

2. If the safety switch brake arm can be dehydrated normally after pressing it with hands or tools, it means that the power-off distance of the safety switch is low, and the safety switch should be replaced at this time.

3. If in the dehydration state, only the wave wheel rotates and the inner barrel does not rotate, at this time should check whether the pawl and ratchet of the clutch have been separated by traction 3, if not, it may be that the adjusting rod nut on the drain valve is loose and worn, resulting in insufficient opening distance, the distance of the adjusting rod should be readjusted at this time, so that the pawl and ratchet of the clutch can be separated.

Dear, it is recommended to call the official ** immediately to report for repair, so as not to affect your normal use.

1. You can check whether the power is on, or whether the faucet is turned on, and rule out that the automatic washing machine does not enter the water due to negligence. 2. The filter screen of the inlet valve is blocked. Workaround:

Clean the filter and re-energize the installation before starting the washing machine. 3. The water inlet solenoid valve is faulty or the plug-in line is not in good contact. Workaround:

Contact after-sales service, replace the water inlet valve, and repair the plug-in line. 4. The water inlet relay on the control board is broken. Workaround:

Contact after-sales service for repair. Extended Information: Troubleshooting common faults of washing machines:

The water inflow must exceed the set water level by a large number before the water inflow stops. Analysis and maintenance: This phenomenon shows that when the actual water level has reached the specified height, the lead cracking air pressure in the gas collection chamber of the water pressure switch still does not reach the specified value, and the water pressure switch will only operate if the water level continues to rise.

The specific causes and treatment methods are: 1. The air conduction nozzle of the air collection chamber of the water pressure switch is blocked or leaking. As long as the debris at the air nozzle is removed; Or seal it with 401 glue at the air leakage.

If the air guide hose is aged, kinked, or cracked and leaking, the air guide celery hose should be replaced. 2. The pre-compression amount of the water level control spring of the water pressure switch is too large. Just unscrew out some of the adjusting screws to reduce the amount of precompression of the water level control spring.

3. The reversing push rod and transmission parts in the hydraulic pressure switch are deformed or damaged. It can be solved by repairing and correcting, and in severe cases, the water pressure switch should be replaced.

Washing machines are one of our common home appliances, and dehydration is one of the commonly used functions in washing machines. However, sometimes the dehydration button of the washing machine may not function properly. At this point, how do we solve this problem?

First of all, we need to check if the power supply of the washing machine is normal. If there is a problem with the power supply, it can cause the entire washing machine to not be able to run properly. We can check the socket and the power cord for contact problems, or replace the power cord to see if it solves the problem.

Secondly, we need to check whether the water level of the washing machine is normal. If the water level is insufficient or too high, it may cause the dehydration function to not work properly. We can inspect the inlet and outlet pipes of the washing machine to make sure the water level is normal, and clean up the dirt and blockages in the pipes.

If none of the above methods solve the problem, we can check the control panel of the washing machine. The control panel may malfunction due to prolonged use or misoperation. We can restart the washing machine or reset the control panel to see if we are able to restore the dehydration function.

If none of these methods solve the problem, we recommend finding a professional repairer to repair it. It could be that there is a problem with the parts inside the washing machine that need to be replaced or repaired. Here, we would like to remind you not to disassemble the washing machine without permission, so as not to cause damage or safety problems.

Finally, we hope that users should maintain and clean the washing machine frequently, and regularly check whether all the functions of the washing machine are normal to ensure the normal use of household appliances.

Summary. Repair method.

1.If the motor has sound but does not rotate, the motor is short-circuited or damaged between turns, or the capacitor is not connected to the motor circuit. At this time, the power supply should be cut off, and the motor belt should be removed to restart.

2.If the motor does not rotate, it is a motor failure and the motor should be repaired or replaced.

3.If you find that the solenoid valve is damaged, you need to find a professional maintenance personnel to replace the solenoid valve.

4.If the plug is loose, it should be reinserted and tied tightly with a strapping wire to prevent it from falling off again.

5.If the computer control board is faulty and the control board is inconvenient to repair, it is recommended to replace it.

6.If the temperature of the washing machine is high, it belongs to the heat engine protection, and it can be used after the heat protector is reset.

The washing machine is dehydrated and does not turn.

Wait, dear, I'm looking for you here.

Dear, hello, according to your problem, the washing shed dry clothes machine dehydration does not rotate for the following reasons:1It could be a motor failure.

2.The solenoid valve is damaged. A damaged solenoid valve can also make the dewatering not work properly.

3.Due to the connectors in the connecting wires of the drum washing machines, the motor plugs often come loose during transport or are ejected during installation. 4.

The computer control board is malfunctioning. 5.Due to overload, stalled chain return and other reasons, the motor thermal protector heats the motor, and the motor thermal protector acts without dehydration of the washing machine.

Repair method 1If the motor has sound but does not rotate, the motor is short-circuited or damaged between turns, or the capacitor is not connected to the motor circuit. At this time, the power supply should be cut off, and the motor belt should be removed to restart.

2.If the motor does not rotate, it is a motor failure and the motor should be repaired or replaced. 3.

If you find that the solenoid valve is damaged, you need to find a professional maintenance personnel to replace the solenoid valve. 4.If the plug is loose, it should be reinserted and tied tightly with a strapping line to sharpen the sail to prevent it from falling off again.

5.If the computer control board is faulty and the control board is inconvenient to repair, it is recommended to replace it. 6.

If the temperature of the washing machine is high, it belongs to the heat engine protection, and it can be used after the heat protector is reset.

I paid it, why didn't I talk back.

Kiss, you can take a look at the questions I send you.

Wash can be turned. Dear, you open the back cover of the washing machine, so that the washing machine enters the dehydration program, observe whether the drain valve is opened by the tractor of the moving mold should be cautious, if not, it may be a computer board failure or a traction device failure; If it is observed that the drain valve core is pulled open, but the water is not drained, it is a blockage of the drain pipe, and in most cases, the entrance of the drain valve shed is blocked.