-
Yours is xp traditional driver, don't go to the driver home to find where there is no support for traditional driver **driver wizard is now the most popular on the Internet**driver software automatically scans the latest driver support one-click installation Super Rabbit in the driver angel can also be don't install the graphics card driver in Super Rabbit There will be a blue screen phenomenon。
-
First of all, it is recommended that you try to install the sound card driver for Windows 2000 operating system in the motherboard drive. In many cases, drivers for Windows 2000 and drivers for Windows XP can be used in common. Secondly, it is recommended that you go to the official homepage of the motherboard or.
The new driver of such a third-party **** motherboard, the new version of the motherboard driver may contain the driver of the sound card for Windows XP. The final suggestion is to install software such as SISoft Sandra to check the system information, in which you can clearly see what model your sound card is, and then install the relevant driver according to the specific model of the sound card**. **:
Collected and organized on the Internet.
-
When we use the computer, we often encounter the situation that we need to install a sound card driver. So, how do you do that? Next, I will take the pure version of the XP system as an example to introduce you to the specific method of installing the sound card driver in the computer.
The details are as follows:
If there is no sound on the computer due to sound card driver problems, we can enter my computer --- right-click --- select --- Properties--Hardware--Device Manager as shown below:
Click on the device manager to enter the following electric balance brain hardware driver view, as shown below.
The sound card driver is not working properly, and an exclamation point is displayed.
As seen in the figure above, it is a typical problem of no sound in the computer caused by the failure of the sound card driver, you can see that there is a yellow exclamation mark in front of the "multi** audio controller", which means that there is a problem with the sound card driver, most of the reasons are due to the incompatibility of the sound card driver and the hardware of the installation system, so how to solve the problem that the sound card has no sound on the computer due to the incompatibility of the driver?
Many friends may say that it is feasible to change the system and the solution is actually feasible, but it is more troublesome, and I dare not guarantee that the drivers in the new system will be compatible with the hardware, so is there a better way? In fact, as long as the driver corresponding to the hardware of the computer sound card is installed.
First of all, we have to check the specific brand and model of the computer sound card, which needs to be viewed more clearly with the help of software, and it is recommended that you use Master Lu to detect, which is very convenient.
Open Master Lu software, we can see the working status of our computer, the working temperature of each major hardware, and whether it needs to be energy-saving and optimized, etc., the function is still excellent.
So how do you look at the configuration of the computer?
We click on the hardware detection next to the homepage to start automatically detecting the computer hardware and give us the hardware information, which is the configuration information we need.
A brief introduction to the installation method:
Click on the yellow exclamation mark as shown in the image above, click Reinstall Driver--- select Install from the list --- select the path of the sound card - the rest of the way is OK to complete the installation.
It is highly recommended that novice friends if you want to install the driver or update the driver can use the driver wizard software, you can very convenient to update the driver and install the driver, when the computer has a driver failure, the software can be automatically detected, we can update the automatic installation with just a few clicks of the mouse, very convenient.
The driver wizard software is very simple to use, full Chinese interface, after the installation software enters, the software will automatically detect whether there is a problem with all the hardware of the computer, when the graphics card driver has a problem, it will automatically detect, prompt whether to install a new driver, etc., and will also prompt which drivers can be updated to a higher version, etc., the function is very powerful, very suitable for novice friends to operate, truly update the driver and install the driver without asking for people.
That's it for the XP system installation sound card driver tutorial.
-
Why don't you try a different system disk! That's the problem with my computer! The old system disk will prompt you that the driver version is too low! Just change it! If you're a newbie! Better try it again!
-
Do you need my help" I'm doing computer technology, and I'll get it for you remotely if I can.
-
Is it a motherboard integrated sound card?,Install the motherboard driver first.,Then try the sound card driver.。
-
You, right-click on my computer -Properties-Hardware-before you uninstall the sound card driver. Then you can update with the driver sprite or super bunny.
-
2 6 Then check whether the audio is disabled in the pop-up panel, if it is disabled, click the small speaker below to turn it on.
Right-click on the computer icon, select Properties, enter the interface, and then click Device Manager on the left.
Then click on the small triangle to the left of the sound options to see if the sound card is disabled.
Finally, if it is disabled, right-click on the sound card and click Enable.
If the above methods do not solve your problem, then you should consider whether the cable is plugged in properly, whether the hole is plugged in correctly, whether the microphone speaker is broken, and other external causes caused by the hardware.
Hope it helps.
The question sound card was usable a year ago, and now the computer will be turned on and used for a while**and it won't**, but there is no sound when you speak.
-
No sound troubleshooting:
1. Check whether the sound card, cable, speaker and other equipment are connected normally; Run anti-virus software for anti-virus;
2. Right-click "My Computer" --Properties--Hardware"--Device Manager", open "Sound, ** and Game Controller" if there is any problem, that is, see if there is a yellow tongue in front of it" "If so, reinstall the driver of this device to solve it;
4. When there is no sound and only the shed lacks a small speaker, open the control panel--- add and remove programs--- add and delete windows components, tick the check mark in front of "Accessories and tools", click "Next", and then, shut down and restart, the system will prompt you to install new hardware, and follow the prompts to install;
5. Uninstall the sound card driver, reinstall or upgrade the audio driver;
6. When the sound card driver is installed, the prompt "AC chip cannot be found" appears, it may be that the computer is poisoned, or the sound card driver has been deleted by mistake due to illegal operation, or the solution to the internal software conflict is to reinstall the system and driver;
7. Simply ignore it, wait for a period of time after shutting down and then restart it, sometimes the sound problem will solve itself, you may as well try;
8. Start - Control Panel - Sound and Audio Device - Sound, see if it is set to silent, and then select Windows Default;
9. Click Start Run, enter regedit, press enter, this opens the registry, click a few hkey-current-user, click on the controlpanel item, and then click the beep in the sound under it to change its value from no to yes restart, is it to hear the long-lost power on and off sound again;
-
Some WinXP users who use the ConexantHD sound card chip find that they cannot successfully install the sound card driver in their laptops, how to solve this problem? Today, I will share with you the solution to this problem, and the following is the specific operation step.
Recommended:The latest XP system for notebooks
Workaround:
1. The sound card patch needs to be installed, and the noisy patch KB888111 (UAA bus driver) must be installed after the chipset;
2. Screenshot of the device manager before installing the sound card driver, there is a pcidevice device that is not driven;
3. After installing the patch KB888111, a screenshot of the sound card appears in the device manager;
5. The sound card driver is successfully installed.
The above is the solution to the winxp system note failure beam can not successfully install the sound card driver, and the same situation can be solved according to the above methods!
The reason for this problem is that the startup was deleted. >>>More
Amount e e e e e e e"Windows can't show Windows Firewall settings due to unrecognized issues. So the virus was disinfected in safe mode, and the symptoms were still the same after restarting. >>>More
Here are a few things you can try (if the first three don't work when you paste on your desktop, you can use the fourth fix): >>>More
Commonly used software includes: Internet Explorer (for Internet surfing), Microsoft Office (text processing), Windows Media Player (****), WinRar (compressed files), Windows Optimizer (optimize computer), Tencent QQ (chat), OneKey Ghost (restore system), 360 Security Guard (optimize system management software, etc.).It's a good idea to install antivirus software. >>>More
There is no big taboo in this, just to express the niece's condolences and regrets. True. >>>More