Who understands the car, how to see if it is an accident car or a soaking car

The condition of the vehicle is the only criterion for evaluating the vehicle, how to query the vehicle condition data with one click (accident accident record query, maintenance record query, etc.)? Click on my avatar to see the introduction, and take you to learn more about how to check the car condition!

Specialized testing is required

Generally speaking, the soaking car can be roughly divided into three types according to the damage, the first is that the water surface exceeds the wheels, and the vehicle floor mat is waterlogged, the second is that the water surface soaks the seat or exceeds the center console, and the third situation is that the water surface directly exceeds the car body.

After the soaking truck is cleaned, it is not easy to distinguish by the appearance.

Unlike accident cars, soaking trucks are not easy to distinguish through appearance, and soaking cars are mainly repaired for parts that have entered the water, and rarely involve sheet metal. For example, after the headlights and taillights enter the water, by replacing or draining the water in the lamp group, the water in the car is also cleared of the water, and the soaked parts are disassembled and dried or directly driedEven if the soaking truck is cleaned, it will produce a musty smell, which is the most practical and easiest way to check the soaking truck.

How do you know the real condition of a used car? After reading it, I no longer worry about buying an accident car and a soaking car.

Generally, after the soaking car is immersed in water, it will be traced under the seat, and it should be seen by observing it yourself, and the front body cover should be opened to see if the position of the engine bracket and the water tank has changed to distinguish the accident car.

The accident car generally conducts a comprehensive appraisal of whether the paint, sheet metal, and screws are disassembled, deformed, or displaced, the damage to the ABC column, and the trunk inside and outside the car.

The soaking car can generally be smelled (even if the soaking car is cleaned clean, it will produce a musty smell), see (there is rust in the car, and some sediment will remain in the gaps), touch (most of the car seats are made of foam sponge material, and the material will be hard after entering the water), and test (whether the center console is abnormal, and the LCD screen is different in light and dark).

If you are not at ease, you can come to Guangdong Mingjian Judicial Appraisal Center, we have an authoritative automobile testing center, I hope to help you.

Hello, the accident car looks at whether the girder has uneven welding and deformation, and the soaking car looks at whether the indoor oxidation and rust are more, and there are water marks and mud.

In an accident, you can open the cabin cover to see if there is new glue on the side of the engine, whether there are traces of re-engagement, see if there is any welding or sealant near the front beam, open the left front door if water enters, remove the sealing cover, and see if there is any abnormality in the wiring harness joint.

Water Tank Inspection:

1.Open the hood to see if there is sludge left in the water tank, gas radiator, and front plate of the water tank (see from below).

2.Look at the small parts next to the engine, the charging motor, the starter motor, the electrical sockets, and the sludge at the joints of the left and right wheel turtles.

3.Front and rear seat seats (upside down) to check the spring and inner cover of the brown cloth residual sludge and musty smell.

4.Check the residual sludge in the dead corners of the hidden seams of the rear wheel turtles on both sides of the trunk seat (spare tire seat).

5.There is an obvious line of sludge in the middle pillar (covered with plastic trim) in the middle of the front and rear doors, indicating the height of the car's soaking in water (it is not easy to clean because there are too many dead corner joints in the pillar).

Second-hand cars are dug up by the front and rear windshield rubber (from the inside of the car) with a screwdriver, and if there is sludge inside, it is a fully soaked car, and any water exceeding the hood is considered a fully soaked car (extinguished).

1. Check the engine compartment. Whether the engine compartment is dirty, whether there are sediment-like stains attached to the water tank, air conditioner radiator, and small lenses for the front panel of the engine compartment (from the bottom up). If it has been blistered, it is also important that the engine may look newer (because it has been cleaned).

2. Accident vehicle refers to the vehicle that is damaged by an accident caused by unnatural wear and tear, resulting in a decrease in mechanical performance and economic value. "Accident vehicle" generally refers to a vehicle with structural damage. At the same time, soaking trucks and fire cars also belong to the category of "special accident vehicles".

Click to talk about my avatar to see the introduction, and take you to understand the car condition query method! Professional query [accident record], [4S maintenance record], etc., the data is accurate, and the report is issued in seconds! One-click investigation of bad car conditions such as accident scattered old hall cars, soaking cars, meter adjustment cars, and fire cars!

How to identify a soaking car and an accident car? It is possible to identify the soaked and accident vehicles by observing the condition of the body. Here's how to identify soaking trucks and accident cars:

1. Check the car lock: see if there are traces of the car being pried open or damaged. Then use the key to open each door to see if the door locks are the same set and whether you can easily turn each door lock.

It should be noted that if the rotation is very laborious, or even when the key is about to be broken, it may be due to soaking in water, which causes the central control motor to rust and cause poor work. 2. Engine compartment: check whether the fixed tripod of the lighting and signal light groups in the engine compartment is broken or loose.

Check the electrical connectors and sockets, if there is a large amount of sediment or rust spots attached to it, it may indicate that it is a soaking truck. 3. Identification of the engine room: check whether there are traces of mud adhesion in the gap between the petition wires and vacuum tubes on the engine body, the high-voltage ignition coil and the spark plug, and judge whether the aging and cracked section of the pipeline line is consistent with the age of the vehicle, and whether the fuel injector is fixed.

Whether the spring is rusty or not can help determine the probability of soaking the car. @2019

Answer 1, look**: The car orange state that has been soaked in water will have a downward range of 20% compared with the same model in the price round cherry blossom grid; 2. Engine compartment: whether the engine compartment is relatively dirty, and whether there are sediment sedimentary stains attached to the water tank in the engine compartment; 3. Engine support frame:

The nuts of the engine support frame were screwed through; 4. Engine body: The nuts on the engine body have been screwed to see if there are traces of rust. Legal basis: According to Article 598 of the Civil Code of the People's Republic of China, which came into effect on January 1, 2021, the seller shall perform the obligation to deliver the subject matter or deliver the documents for the extraction of the subject matter to the Songhong buyer, and transfer the ownership of the subject matter.

Article 610:If the purpose of the contract cannot be achieved because the subject matter does not meet the quality requirements, the buyer may refuse to accept the subject matter or terminate the contract. If the buyer refuses to accept the subject matter or rescinds the contract, the risk of damage or loss of the subject matter shall be borne by the seller.