How to remedy the slippage in time when running, drifting, and skidding?

Updated on Car 2024-05-23
20 answers
  1. Anonymous users2024-02-11

    You can release the arrow keys once! Then press it right away and squirt!

  2. Anonymous users2024-02-10

    Reverse drift can force the end of the drift.

  3. Anonymous users2024-02-09

    If it's a U-bend, hold down the left button (or right button) hard to make a corner, and it won't have much effect on the speed, I'm experienced! But if it's a small bend, as mentioned above, release all the keys, but not the left (or right) button! Then press the forward button immediately after releasing the forward button, be fast!

    That's it, got it?

  4. Anonymous users2024-02-08

    Optimal drift: shift (shift must be very light) (pull back the head).

    Jet) Drift: Shift (into drift) (pull the head of the cart).

    shift (where is the first drift of the jet and shift is the entry of the second drift).

    Break: Shift

    shift (point when the first drift is not finished, shift lightly click) (jet) double spray: shift (optimize drift) [pull back the head of the car (do not spray, because the first drift can be sprayed once, but not here] + shift (enter the second drift immediately after the first drift, remember: the drift here can not be pointed) + due to the first drift, here is the first drift of the spray, and the head of the car is pulled) (spray the second drift).

    Spray: Shift

    Pull back the head of the car (do not spray, because the first drift can be sprayed once, but not here) + shift (the first drift immediately into the second drift, note: the drift here can not be pointed) + due to the first drift, here is the first drift of the spray, but the head of the car) + shift

    (Repeating these two steps is a continuous spray).

  5. Anonymous users2024-02-07

    Press the opposite arrow key in the direction you skid.

  6. Anonymous users2024-02-06

    Press the reverse arrow key before letting go to make the drift end as soon as possible.

  7. Anonymous users2024-02-05

    They said nonsense, hold down the direction of the skidding side, Jian must be short (pull his head back) and then breathe fire forward.

  8. Anonymous users2024-02-04

    Loosen up the acceleration (up) and then turn on it.

  9. Anonymous users2024-02-03

    When it's floating, when it's over, just click!

  10. Anonymous users2024-02-02

    Practice your optimization well, and when you come out of a bend, it's best to adjust the angle of entering the next bend directly, otherwise you can think about it yourself if you adjust every place, there are so many bends in a picture, and the most basic drift is the best, and there is a broken position, don't practice those even sprays and the like, practice these two and then practice that, otherwise even if you spray, your drift speed will not be particularly fast.

    The speed of drifting, this is very important, the angle of entering the corner, is also very critical, practice these two to home, and then find the feeling of cutting the dead corner, otherwise, even if you cut to the extreme in every corner, but your drift has no speed, and you have taken too many wrong roads, and it will not be fast in the end.

    Optimize drift.

    2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

  11. Anonymous users2024-02-01

    .Optimize drift.

    2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

    Just practice a lot.

  12. Anonymous users2024-01-31

    In addition to what I said upstairs, I think more practice is the most important thing. But it is also necessary to summarize more experience and skills. Practice makes perfect.

    By the way, my advice: turn early (no need to slow down), drifting depends on your own practice and understanding, drifting down is nothing. Good luck getting better and better!

  13. Anonymous users2024-01-30

    The length of the drift depends on how long you press shift, and there are generally two types of drift, or it's the U-shaped. Or a big bend. The U-shaped ones should be as long as possible, so that the drift angle will be fixed.

    Of course, don't press it for a long time) Just press it for about 1 second for that kind of big bend. Otherwise, it will drift by. The angle of the idea into the bend.

  14. Anonymous users2024-01-29

    Hello, this problem occurs because you don't have a good grasp of the time to press s(shift), and you don't pull the head of the car well. You can try to drift while holding down the s for seconds and then let go, then pull the front of the car, and when the front of the car is straight, press it directly, and practice a lot.

  15. Anonymous users2024-01-28

    1.↑+

    2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

  16. Anonymous users2024-01-27

    Running is a competitive game, playing control, unlike other online games where you can go anywhere by pressing the arrow buttons, this technique needs to be practiced slowly.

    Press shift+arrow keys to drift, while holding down the key, float over the bend and pull back to the car in the opposite direction (if you want to breathe fire, there are no drift traces on the ground, quickly release and press the key again), and then press the key to run in a straight line.

  17. Anonymous users2024-01-26

    Before you press and hold, add direction, (left or right) and shift, don't press for too long. Then pull back in the opposite direction of your drift.

  18. Anonymous users2024-01-25

    To float in the circle, don't hold down and don't let go of the left when floating, press once, and it's OK to control it on the right.

  19. Anonymous users2024-01-24

    When you get to the corner, hold down the shift key for about 2 seconds, then let go and give it a try. Hehe.

  20. Anonymous users2024-01-23

    Practice more, you look at the official website, there are teachings!

Related questions
17 answers2024-05-23

If the clutch of the car slips, the power is missing, the acceleration is weak, and if it is serious, it will burn the clutch plate, that is, there is this burnt rubber smell The vehicle cannot drive, if the vehicle cannot drive, this can only be called a trailer. There's no way around it, hope.

13 answers2024-05-23

The washing machine wheel slipped for two reasons:

1. The pulley has been used for a long time, the wear is large, the friction is reduced, and if it is used frequently, the perimeter of the pulley tension will increase, and it is necessary to replace the new pulley. >>>More

8 answers2024-05-23

Normal Drift Fingering: 1shift ( Enter Drift ) 2Pull back the head ) 3.Release forward and then quickly press the flamethrower).

7 answers2024-05-23

When the bleaching is finished, release the forward key and press again.

29 answers2024-05-23

You can pseudo-drift by slamming into the side of someone behind you when it's about to catch up with you. He will turn in the other direction, if you are hit, press the key in the same direction and follow his force and you will overtake him, if you hit a wall, press the back button and then press the front button. Be fast, just practice more.