What happens if the Tianyu mobile phone W719 can t be turned on?

If you can enter recovery, flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select the third item, wipe data factory reset, press the power button to confirm, and then press yes with the selected yes; Then select the fourth item, wipe cache partition, press OK, and select yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it).

Select the fifth option, install zip from sdcard, press the power button to confirm, then select the second option, choose zip from sdcard, press the power button to confirm, then select the rom flash file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

Hello, according to the situation you described, if your phone can't be turned on at the moment, it is recommended that you try it as follows.

1) Try changing the battery to try it out.

2) If there is only one battery, it is recommended to connect with the computer to charge, check whether there is a charging display, you need to activate the battery for about 2 hours, although it may not be displayed when connected, but it doesn't matter, observe whether there is a charging prompt after 2 hours, if so, turn to normal charging.

3) If it is still not displayed, it is recommended to contact the Tianyu after-sales service center, and the address of the Tianyu national after-sales service center.

Hello, according to the situation you described, it may be because the battery is draining too fast, it is still in a discharged state after low power, and the battery has gone to sleep. State Days.

It is recommended that you install the battery and use the computer to connect the data cable to charge the phone, although it is not displayed at the time, but the phone will still be charged at a low current. Wait about 2 hours to observe and see if there is a charging display.

If there is a charging display, it can be converted to a charger to charge the source.

If the cracked orange still can't be solved, you can go to the Tianyu after-sales service center for testing.

My Tianyu w860 has also been in this situation,But it automatically restarts after the black screen,It should be compatible with that**software is not Nian Min Loss Zen is too compatible with the empty branch,I don't know if you are the original system,Or did you change it? Wait, a battery with electricity should be fine!! Then upgrade the ** software, or uninstall it, so that it is basically stable!!

Hello, 1) You can enter the recovery mode first, and then do double clearing, and you can generally troubleshoot.

2) How to enter recovery: Press and hold the volume up button + power button, wait until the red screen is released, use the volume button to select the two lines of English at the beginning of wipe, please press and hold the power button to confirm, and then select the first item to restart the phone. It should be fine.

3) If it doesn't work, it's a problem with the font, it is recommended that you contact the Tianyu after-sales service center to view, the address of the Tianyu national after-sales service center.