Ask for a summary of the technical work of thermal metrology

Mainly write about the content of the work, the achievements, and the shortcomings, and finally put forward reasonable suggestions or new directions... **: Summary, is to conduct a comprehensive and systematic general inspection, general evaluation, general analysis, total research of a period of time, analysis of achievements, deficiencies, experience, etc.

Summarizing is a type of applied writing, which is the rational thinking of the work that has already been done. Summarizing and planning are complementary to each other, and it is necessary to take the plan as the basis, and the formulation of the plan is always carried out on the basis of personal experience. Basic Requirements for Summarizing 1 The summary must have an overview and narrative of the situation, some of which are relatively simple, and some of which are more detailed.

This part mainly analyzes the subjective and objective conditions of work, favorable and unfavorable conditions, as well as the working environment and foundation. 2 Achievements and shortcomings. This is the center of the summary.

The purpose of summarizing is to affirm the achievements and find out the shortcomings. What are the achievements, how big are them, what are the aspects, and how they were achieved; It should be clearly explained how many shortcomings there are, in which aspects, in what nature, and how they arise. 3 Lessons learned.

Having done something, there will always be experiences and lessons. In order to facilitate future work, it is necessary to analyze, study, generalize, and concentrate the experiences and lessons learned from past work, and to raise the level of theory to understand. Future plans.

According to the tasks and requirements of the future work, draw on the experience and lessons of the previous period, clarify the direction of efforts, and put forward improvement measures. This is the basis for analysis and drawing lessons. 2 Be organized.

The summary is written for people to read, and if it is not well organized, people will not be able to read it, and even if they read it, they will not know why, so the purpose of the summary will not be achieved. 3 It should be cut appropriately and appropriately. Materials are essential and phenomenal; There are important and secondary, and when writing, we should remove the essence from the details.

The questions in the summary should be divided into priority and detail, and the details should be detailed, and the details should be omitted. Basic format of summary 1, title 2, body Beginning: overview of the situation, overall evaluation; The outline is summarized and the whole text is summarized.

Subject: Analyze the shortcomings of the achievements and summarize the lessons learned. Ending:

Analyze the problem and clarify the direction. 3. Signature, date.

Briefly describe your work steps and make reasonable suggestions. Such as: equipment update, maintenance. If you encounter difficulties in your work, you can put them forward in the summary.

I have a work summary**, I don't know if it's what you want. Maybe it's a little simple.

With the care and strong support of the hotel leaders, and with the hard work and unremitting efforts of all the staff of the department, we have overcome the difficulties of fewer personnel and increased workload, and have begun to vigorously carry out maintenance and potential technical transformation, actively solve various problems in equipment and facilities, and have successfully completed the tasks assigned by the hotel leaders.

1. The scope of measurement verification is very wide, flow measurement, length measurement, pressure measurement, quantitative measurement, etc., which mainly depends on the main products produced by your company.

2. If it is a simple measurement, it does not need too professional knowledge, and it is enough to master the analysis method of general error. If it is a measurement with high technical content, such as electrical measurement, then you should read some electrical books, and so on.

3. If you want to do this job well, you must first be careful and patient, and secondly, you must learn from the experience of veteran comrades. As long as you have a certain sense of responsibility, you can do this job well.

First of all, correct the landlord's statement, metrology inspector is applicable to legal metrology verification institutions and other technical institutions engaged in metrological verification activities of the name of the metrological verification personnel. Because since the end of 2015, China has cancelled the qualification certificate of metrology inspectors, and the inspectors in third-party institutions and enterprises are handed over to market-oriented private training institutions for training and are called metrology calibrators.

Metrology and calibration Metrology verification is divided into ten major sections according to the measurement credits, and the commonly used ones are length measurement, mechanical measurement, thermal measurement, electrical measurement, and physical and chemical measurement.

Metrology calibrator The higher level qualification of the metrology inspector is the registered metrology, and the registered metrology is divided into the first and second levels, and the second-level registered metrology has relaxed the academic requirements to the technical secondary school. So basically, the work of a calibrator is not so complicated, unless it is a very high-tech calibration instrument, such as electrical measurement, and it is necessary to understand the circuit diagram.

The landlord can rest assured to participate in the work, as long as there is patience and perseverance, and humbly ask the seniors, then you can soon start calibrating the work. If you are interested in learning more about the working methods of calibration standards or are willing to further expand your career and apply for the registered metrology exam, you can consult the Institute of Radio and Television Quality. The Institute of Radio and Television Quality provides training courses such as "Metrology Calibrator", "Special Training Class for First-level Registered Metrologists", and "Special Training Class for Second-level Registered Metrologists".

It is best to learn some electrical knowledge first, and all the measurement and verification work is inseparable from the common sense of electricity. Then learn the qualification procedures in certain areas according to your own interests, calibration specifications. Obtain a certificate of inspector before you can carry out your work.

Metrological verification is divided into length, thermal, mechanical, time, chemistry and so on hundreds, you must first determine the dry kind of verification work, if it is mechanical, such as pressure gauge, first of all, you must learn the verification procedures, do the inspector must also obtain the inspector certificate of the quality and technical supervision department. If you want to be perfect, you have to learn and learn again.

Metrological inspector generally refers to the personnel who carry out the verification of measuring instruments, and if the enterprise has a measurement standard, it must be equipped with the corresponding metrological inspector.

Metrological verification is designed to process a lot of data, so it is generally better for people who study science, and to obtain the corresponding metrological inspector qualification certificate, but due to the basic and universal nature of measurement, so the professional restrictions are not large.

Metrological verification is generally in accordance with the corresponding national verification procedures to operate, so the verification personnel must be familiar with the regulations, in addition to the best to learn some basic knowledge of measurement, for example, uncertainty, repeatability, stability, error, etc., these many measurement standards are available.

In addition to the verification of measuring instruments, the inspector is generally responsible for the maintenance of measurement standards, such as the maintenance and regular inspection of standard instruments, the recording and maintenance of the verification environment, and the preparation of relevant information. The metrology inspectors of many enterprises are also responsible for the equipment management of the enterprise.

Summary of 14 Star Classroom Training.

Summary of the work of an electrical engineer.

I graduated from the Department of Automation, University of Technology in July 1992, majoring in industrial electrical automation. From July 1992 to June 2001, he worked in the Provincial Industrial Equipment Installation Company. In the past ten years of work, he has been engaged in professional and technical work and technical management, and has served as the leader of the electrical commissioning team and the head of the electrical department of the electrical instrument automation branch.

In my work, I have always adhered to the combination of theory and practice, actively and actively went deep into the front line of engineering construction, adhered to the work criteria of modesty, practicality and diligence, accumulated rich practical experience, and achieved certain work results, which were recognized by the majority of employees, unit leaders and construction units. During this period, I have gone through a number of national, provincial and ministerial key projects, completed the installation, commissioning, system start-up and operation of electrical engineering of various industrial and civil projects, compiled a large number of construction organization designs, construction plans, and system trial operation plans, and had a more comprehensive and systematic understanding of technical management and production management in the process of construction and installation. Years of hard work in the front line of construction have greatly expanded their professional and technical knowledge and improved their management capabilities in terms of breadth and depth.

In June 2001, I was transferred from the Provincial Industrial Equipment Installation Company to the Engineering Branch of China International Economic and Technical Cooperation Corporation as a professional engineer, engaged in the bidding, design and construction management of foreign aid projects. Due to the rich domestic construction experience as the foundation, it is relatively easy to master the management of construction technology in foreign aid projects. Through the comparison of domestic and foreign construction, we can grasp the key points and improve work efficiency.

I also broadened my knowledge.

Looking back on the work process of the engineer in the past five years, after the training and practice of many large and small projects, he has made great progress in the professional and technical level and professional and technical management level, and has been able to preside over one party and win for the company.