What should I do if I don t have a computer at home and my router is turned on and I can t connect t

The steps to set up your router with your phone are as follows:

Restore the router to factory settings first (the hole on the back of the router is slightly thicker than a toothpick, insert it with a thin skewer and hold it for more than 5 seconds, and wait for all the lights to flash, then it will be restored).

First, enter the router, (open the UC browser on the mobile phone, enter OK in the address bar, OK if not.) In the login box, fill in the username and password admin or guest. On the left is the menu, and there are submenus under those + signs. ）

In the settings interface of the router, find the IP setting option of the WAN port on the menu, there are static IP, dynamic IP, and PPPoE in this place, select PPPoE dialing, fill in the broadband and password (password), there are "automatic connection", "on-demand connection", etc., select automatic connection, and save.

Second, on the settings interface of the router, find the DHCP settings on the menu, select "Enable", and save.

3. In the settings interface of the router, find the settings of the wireless connection, select "Open", fill in the wireless password, and note:

Encryption method: wep WPA2 PSK

Password setting: more than 32 digits plus letters with mixed case and case. to prevent rubbing the net.

Fourth, find the channel (some are called frequency bands) on the menu of wireless settings, select 6, and save.

Don't move anywhere else.

Fifth, bring it up separately, and after saving the settings, please don't forget to click the "Restart Router" button.

The mobile phone can be connected to the router's wifi, and then enter the gateway of the router in the mobile phone browser, and then output the login and password of the router, you can enter the router's settings menu to set up your network.

Configure the computer IP to automatically obtain and restore the router to its default settings;

1. Log in to the router (for TP-Link routers: turn on your computer and click IE

2. Click on the network settings on the left, select PPPoe in the WAN port settings, enter the username and password given by the operator (if you don't know, call broadband customer service), and enter the DNS address (you can check your local DNS address on the Internet);

3. Turn on the DHCP server;

4. For the wireless router, turn on the wireless network, turn on the wireless network function, and set the wireless login password (security option wpa-psk wpa2-psk, enter the key);

Save the parameters and it's OK, and the desktop is already capable at this point.

Now, turn on the wireless network card in the right corner of the desktop and right-click to view the available wireless network, now your router broadcasts the signal, double-click to connect, enter the key and get it. Wired and wireless access is available.

Configure the IP on the computer to automatically obtain,In the future, you can go online,Open the browser directly on the desktop computer should be able to surf the Internet,Finally, connect the computer to the network (wired,

Optional) to check whether the Internet can be accessed normally.

If you can't access the Internet, you can only connect to the computer that can access the Internet normally after dialing up the link on the router, log in to the router again, and do it in the WAN port settings.

That's it.

In this case, it means that there is a problem with the router, restore the factory settings of the router first, and then configure the router.

How to configure the router:

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

3.Set the Internet access mode (dial-up or static IP, etc.), set the Wi-Fi name and password, and set advanced operations such as broadband restrictions.

Wi-Fi Setup Interface:

Wideband Control Interface:

Let's do a factory reset、Or what else can I do?。

Regarding the problem of mobile phones not accessing the Internet through a normal wireless router, here are a few experiences that have solved the problem correctly.

1. Modify the SSID of the wireless router, remove the sporadic symbols, use the SSID with only letters, do not use the default as much as possible, after restarting the router, the mobile phone can search again, and most of them can be solved;

2. For some Android machines, you can go to the wireless router settings page and change the connected wireless mode from the default mixed mode of the router to the 11G mode, 11B is OK, but the network speed will be slower than 11G, which may be due to the fact that the Android system does not support the mixed mode or 11n mode well enough.

Finally, a word of advice, if you don't want to be rubbed online, don't cancel the wireless security password, and don't set it to less secure WEP encryption.

1. The wifi can be connected, which can only prove that the wifi connection is not broken, but it does not prove that the wifi is connected to the Internet.

2. Please log in to the WiFi and turn on the connection status of the WAN port of the WiFi. If it shows connected, reboot next. Check whether the WAN connection is successful and obtain the IP address and DNS.

If the WAN shows Connected, Not Connected, or IP and DNS are displayed, it means that the WAN is not connected to the Internet.

3. If the WAN port is not connected, please check the connection settings. You can also re-initialize the wifi and reset it.

Even the router can be connected to the wifi signal is also strong, but it just can't get on the network solution:

Method 1: Dial-up failure due to line connection problems.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Method 2: No router dial-up is set.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Look at whether the computer's network card light is flashing again, according to what you said, it should be gone.

If the light of the router is flashing on and on, no, it means that the router is dead. Then restart the router (power off, turn it back on).

Is it that you are already disconnected, and the router itself can launch a LAN.

Does the local connection automatically obtain the IP address?