Ask the master to crack H3C 802 1X CH V2 20 F2052 2000 points like the title Thank you

Haha, this problem just find me Crack case: Haidian District Xueyuan Road China University of Geosciences Education Network uses the server of Beijing University of Posts and Telecommunications First introduce the easiest way If there are several people in the dormitory, one person can pay the fee A PC is equipped with dual network cards, and the IP of the local connection one is set to the IP assigned by the network center. **The corresponding cracked version of the dial-up software, such as mento to connect (because Ruijie does not support dual network cards currently allowed, here is Ruijie's device),**Address:

Install ** software sygate, set the IP of another network card 2 to , the subnet mask is, the other is empty The PC and other PCs are connected to a switch, and the IP of the other PC is any number between 2-254, but be careful not to conflict with each other), the subnet mask is , and the gateway is Compared with the common MAC address sharing method, the advantages of this method are: The network is relatively stable, and there will be no high packet loss rate The previously used LAN can continue to be maintained, No need to change, the print server and internal FTP can also be used normally, no authentication is required before use, and you can directly access the Internet The disadvantage is that you need to have a PC as a ** server that is always on.

Our school also uses the H3C inode client to surf the Internet, I have a way to crack it, you can give it a try. However, it will be dropped every 10 minutes or so. You choose a xclient client from the Internet, and then enter your username and password, the username must be followed by a suffix, otherwise the dialing will not be successful, because you choose the domain when you use h3c, and you can't select the domain when you use xclient.

Then you set up ccprocxy on your computer and configure your computer as a server. Set the gateway and DNS of the other computer to your computer. This will allow you to share the internet.

If the above doesn't meet your requirements, you can bridge your computer's wireless and local connections, generate new connections, and set up IP, gateway, and DNS. Change the other party's computer gateway and DNS. Can.

Unable. Is the protocol chosen when using the Indoe client? If so, there is no solution, the 1x protocol is the switch port security control protocol, which is authorized with the server linkage. It can only be used on a PC.

If it's 1x. Don't think about it. There is no way.

Connect the cable from the school port to the LAN port and use it as a component box. You can search for its signal with the wireless of the notebook.,Connect it (although it can't be connected),Then log in with the H3C client.,You will find that the client can be connected.,Windows also has to be wirelessly connected and show that it's connected.。 That's how our dormitory is connected.

Huawei H3C client cracked version.

It's simple to use.

Hope it works for you.

This cannot be achieved, and 1x authentication is enabled for the crack bucket champ on the switch side. Authentication is required before port permissions are opened. If you can get into the switch, you can remove the 1x configuration of your coarse port, which can bypass billing. The question is, do you have access to it?

There is no convenient place.

This client is mainly used for authentication.

Like in the campus network, you must install this software and obtain the account password assigned by the administrator to access the Internet.

You can think of it this way: In a particular network, you can only connect to the network if you use it.

If it's just a dial-up Internet access at the end of the Kesong Prefecture, it's not an inode client, and I estimate that the dual network cards are used together. If it's an inode client, don't think about it.