How to knit cotton shoes with wool, tutorials on knitting cotton shoes with wool

How to knit cotton shoes from wool.

A B double thread, sheet weaving, back and forth needle. Pattern: Knitting 3 needles to pick 1 needle, that is, when weaving a line, 4 needles to pick down the B line is not woven, and the thread is bypassed from the reverse side.

nlk'7didkx1, woven from the toes. Start with a line 23 knitting a back and forth, add 1 needle -1<*mbb0 mdt4kd+bz2, change the b thread to knit a back and forth while adding 1 needle, zinqifc lnuy ?0 (3, so that until the foot is long enough.

However, after weaving to 10 rounds, when weaving a line, 3 needles in the middle and 1 needle 5&N55? g6 d?QZ7 KC4, every time I weave a thread in the future, it is 3 needles in the middle and 1 needle.

Knit until the foot surface is long, leave 22 stitches in the middle, and disposable locking needles on both sides j-)9> [e< %0'F P65, heel and toe up, the same weaving method, but knitting to the middle of the needle 5-6 times after the needle with the foot (22 needles) together to weave, then the number of needles is about 70 needles, until you are satisfied with the height on the line. 8e*1l:ob!

CQ%hwyn6, the pattern after the circle weaving: 5 rows of positive needles and 3 rows of reverse needles 2 times, and 2 more rows of knitting at the heel when weaving positive needles. (a;~ p;n needle reverse 6 needle positive, a metaphor, twist the twist pattern cj>=odk[6, the surface of the foot and the heel you look at the stitching.

If you want to sew beautifully, then crochet the edges neatly. m73d^z lgyzgljp

Red wool from 6 knitting first row, back to knit the second line when the first needle is not knitted, the last needle before the addition of a needle and then knit the last needle, and then back to weave the third row, the first needle is not knitted, at this time it is already 7 needles.

Knitting cotton shoes by hand is too labor-intensive. Why don't you buy it?

The weaving method of woolen cotton shoes is as follows:

One: The sole is 2 sizes larger than the number you are actually wearing.

Two: wool to buy *** 2 taels of medium and thick line.

Three: 6 or 8 needles for children; 10 stitches for women and 12 stitches for men. After getting up, make a row of flat needles, and then pick the same number of needles from the opposite line.

Four: The second line of the reverse needle back (two skewers) trumpet needle.

Five: the third row of flat needles, hit the middle of the two needles on both sides of the needle, the right side of the needle at the bottom, the left side of the needle and thread on the top. Add the needle on both sides of the flat needle, and do not add the reverse needle.

And so on, then the crack macro, to the corresponding number of stitches (in general, the total number of stitches is twice the shoe size) can shrink the number of stitches in the middle.

Hit back and then shrink the middle of the needle, and keep hitting until there is still a difference of one or two centimeters, and hit two less rows above the heel (for the sake of the foot), and the two sides are stacked to form an upper. The lining is made of a discarded padded jacket with fluff. Straighten the upper and sew it onto the fluff with a needle, enlarging it a little bit in all directions of the sample.

Two pieces can be sewn together with a hand needle. The sole is also cut from flannel to the sole.

Put on the upper first, and then use a needle and thread to sew it firmly before and after (the reverse side). After sewing, don't rush to turn over the upper, then sew the bottom, and finally sew the lining of the shoe. Then turn the upper over to make a 90% toe cap and fluff (a little more beautiful), and the woolen cotton shoes are successful.

The weaving steps are as follows:

1. First of all, the needle, 38-39 shoes start with 10 needles, each knitting a color, add 5 needles until the end of 35 needles, and weave 30 loops back and forth.

2. Knit the first needle, the second needle plus one needle, and use the left side of a needle to pick out 2 needles when weaving to the end. The latter are to add a needle when weaving the second needle, and the last two needles are picked out without weaving.

3. Knit to the end of only 12 stitches, knit all the 12 stitches and the 46 stitches just picked out, and then change the color of the thread to weave back and forth.

4. Now weaving flowers, first weave 9 needles and then pick a needle without weaving. Knit three more needles, and pick a needle without weaving, has been repeating 11 needles without weaving to pick the past, only the back 8 needles are left, and the reverse weaving is also like that, pick the past 11 single needles are still like that pick the past without weaving, and the rest are all woven under the needle.

5. Change the thread, weave 11 needles and pick 1 needle not to weave the same as the previous line, but the previous line can now be woven, and then knit three needles, and pick a needle not to weave, has been repeated 10 needles not woven past, only the back 10 needles are left, and vice versa, just picked out or not woven, directly pick over.

6. There are 8 needles left, and the reverse is like that, and the 11 single needles that have been picked are still picked in the past without weaving, and the rest are all knitted with needles and picked against the needles picked for the first time.

7. Change the thread and weave it back and forth, and then start picking. In the end, it became like this, three I-words.

8, change the thread to weave a back and forth, pick out 12 knitting back and forth, the second row of weaving to the left needle on the pick 2 needles, weaving back is the last second or third needle and into a needle, so the left pick 2 knitting, the last two or three needles on the right and a needle, has been weaving like this, and finally knitted out 35 needles. 35 stitches all the way to knit 30 rounds, then merge. In this way, the pattern of woolen cotton shoes is finished.

Knitting of woolen cotton shoes:

Wool: medium-wool blended wool, double-ply braided, 12-gauge needle for 38 yards, 11 12-gauge needle for 44 yards; 38 yards about 8 taels; Size 44 with nearly 9 taels (including sole pads).

1. Start with the number of needles that need to be added and the number of needles at the beginning of the middle with a sleeve needle.

38 yards: 15 + 9 + 15 = 39 stitches.

44 yards: (16 + 11 + 16 = 43) needles.

2. Knit the upper and lower needles (flat needles are easy to roll and a little thinner).

3. In the middle of 9 needles (11 needles), add needles evenly, add 8 needles (10 needles), a total of 17 needles (21 needles), and the middle 1 needle is the lower needle, and the upper and lower needles are arranged.

4. After weaving 2 rows in the middle, start to add the number of needles from the left and then the right, 2 rows at a time, 2 needles at a time. Until you add it.

5. A total of 39 + 8 = 47 needles (43 + 10 = 53 needles) with the needles added in the middle; It's all up and down needles. The upper and lower needles on both sides of the stick needle should be slowly transformed into a washboard (back and forth needle); a. Convert 1 pin in 2 rows until there are 13 pin (17 pins) left in the middle.

6. After the transformation is completed, it becomes: 17 + 13 + 17, (18 + 17 + 18) needles, of which 17 needles (18 needles) are both sides of the upper, a little short, you need to add needles, and the needle method: on both sides of the middle:

Add 1 time to 2 rows, and add 1 stitch to each time. Here, 8 stitches were added to men's and women's shoes; 25 needles (female), 26 needles (male); How much to add can be decided according to individual needs. This number of stitches is the height of the heels on both sides.

7. Weave the upper on both sides: weave together with the lining, add the same number of needles on 25 needles (26 needles), and the length of the general weaving: the length of the top + the width of the upper and lower needles in the middle of the cuff = 10 11 cm.

8. Suture: Use the seamless suture method. a.

When weaving the side with the number of needles on the left, it should be 1 row less (if it should be 64 rows, only 63 rows), and the reverse side should be stitched with the right side. b.The number of needles on the right is the number of rows needed to weave when weaving the side panel.

Stitched on the front.

9. Pick the inner layer of weaving, and the order of weaving the outer layer is reversed. It's just that it's better to use a small No. 1 needle for the inner layer. In addition, it is possible to receive 1 more needle when receiving 8 needles. There is no difference in the rest.

Tools Raw materials: wool thread, wool needle.

1. Prepare the yarn and knitting needle. Take 6 stitches to do a knitting demonstration, as shown in the figure below.

2. Start knitting the needle, and add a needle to the winding when there is still the last needle left. Then after weaving the last stitch, turn it over, continue to knit the next stitch, knit until there is still the last stitch left, and then wind the thread and add another stitch, as shown in the figure below.

3. Knit repeatedly until 10 stitches are added to the needle, as shown in the figure below.

4. Then knit the needle without adding or subtracting, and start to reduce the needle from the heel to the toe, as shown in the figure below.

5. The needle reduction method, the last 2 needles in each row and one needle, as shown in the figure below.

6. It is good to reduce to the needle and there are 6 stitches, these 6 stitches are used as the toe cap, and the sole is completed, as shown in the figure below.

7. Use a needle to pick 1 needle in each hole on both sides of the toe cap, pick it on 2 needles respectively, and start to knit the needle, as shown in the figure below.

8. When knitting to the left and right sides of the toe cap, there are 2 needles and one knitting needle, as shown in the figure below.

9. Weave it to the height of the upper in this way, as shown in the figure below.

10. After the upper is woven, start to weave the shoe tube, knit a needle, and then knit a needle, as shown in the figure below.

11. Weave to the required height, 5 and then close the needle and break the thread, hide the thread, and the woolen shoes will be knitted, as shown in the figure below.