Lenovo A65 can you still flash the device after deleting the settings? If you know, please answer, t

Lenovo A65 removed the settings to be able to flash.

Take card swiping as an example: use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

If you have flashed the ROM package of another model by mistake, it is recommended that you flash back to the previous version.

Official website authorized maintenance site inquiry:

If the phone is flashed, the factory reset is still the system after flashing. It is recommended that you reflash the official firmware.

If you have strong hands-on ability and are willing to take the risk (failure to flash may lose the warranty), you can consider flashing the machine yourself. Lenovo Lewen Firmware Zone:

If you are not familiar with the flashing operation, it is recommended that you go to the local after-sales maintenance station to upgrade the flash. For specific tariffs, you can consult the staff of Lenovo authorized maintenance stations and service sites

After flashing, it can't be restored, oh dear. Unless you want to re-farm the original version, is there something important?

This is easy to do,,It's very simple,

Official website authorized maintenance site inquiry:

First root

4 Enter 1, press Enter, and wait.

5 After the end prompts enter, the phone automatically restarts, sometimes wait for a long time to restart, please start yourself, some are self-boot, some are black screen after booting, just remove the battery and reboot it6 Check whether there is more [authorization management] and [re manager] in the phone If these two software are more, you can basically prove that the root is successful, and the second flashes into Chinese recovery

1. Use the Mobile Uncle Toolbox and Chinese Mobile Uncle files.

Run Mobile Uncle and select "Recovery Update".

Find the file on the memory card, select it, and click it.

Select "OK" and then have a "Restart" and click "OK".

Please press "Volume Up" + "Power On" to enter the recovery mode after powering off.

Put the flashing package in the SD card, the volume up button + the power button to enter the recovery mode, select the clear data factory reset (the volume button moves up and down, the house key is OK), and after the clearing is completed, select "Flash the zip file package on the SD card".

Select the ZIP file package on the SD card" OK.

The next menu that appears is the folder menu on your SD card, find the flash package you put on the SD card, select OK The phone will automatically flash, and then select the menu to restart when you are done.

This flashing machine is very simple,Flashing is generally so a few steps,Flash into recovery and then unlock root and finally flash into the flashing package,,The specific steps can go to the depth to see I wish you a smooth flashing。

Dear Lenovo users, hello!

Go to the Internet to find the card swipe bag, and then swipe the card.