How do I pair my Sony true wireless Bluetooth earbuds with my phone successfully?

The earbuds can only be used after connecting to the phone via Bluetooth, and in terms of Android phones, the Xperia Ear Duo can only be paired with Android versions or higher, but now the Android phones on the market are basically above these versions, and the specific connection steps will be followed to understand. Pair with your Android device 1. Tap the Xperia Ear Duo app. 2. Open the Xperia Ear Duo app, tap "I agree", and follow the on-screen instructions.

That's all there is to know about "Sony Xperia Ear Duo Pairing and Connecting to Android Phone".

In order for the true wireless Bluetooth headphones Xperia Ear Duo to work, you must install the latest version of the Xperia Ear Duo app on your Android or iOS device and then pair it. The Xperia Ear Duo app can be found on Sony Select or Phone Assistant. Make sure not to cover the proximity sensor with your fingers, as this may prevent the subject from entering pairing mode.

Android can only be paired with Android version or higher. Device: Make sure you have the latest version of the Xperia Ear Duo app installed.

2.Launch the Xperia Ear Duo app and follow the on-screen instructions. ear duo ：

After completing the pairing, the LED indicator of the main body flashes white light once. iOS can only be paired with iOS version 10 or later. Equipment:

Make sure you have the latest version of the Xperia Ear Duo app installed. 2.Turn on Bluetooth.

Ear Duo: Press and hold the touchpad of the main body (R) for 5 seconds. The LED indicator flashes blue light rapidly.

4.Keep the main body (R) and the iOS device close to each other. Equipment:

Launch the Xperia Ear Duo app and follow the on-screen instructions. Pair with a device other than Android or iOS1Press and hold the touchpad of the main body (R) for 5 seconds.

The LED indicator flashes blue light rapidly. 2.Follow the instructions provided by the device you want to pair.

3.After completing the pairing, the LED indicator of the main body flashes white light once.

Bluetooth headset Sony Xperia Ear Duo both have a large-area touchpad on the machine, which supports touch operation. On the left judgment earphone, click to pause ** song, double click the next song, triple click the previous song, swipe up to increase the volume, and slide down the shirt to decrease the volume. Sliding up and down of the right earphone is also to adjust the volume.

All of the above gestures are fixed and cannot be changed.

The true wireless Bluetooth earbuds Sosui Deni Xperia Ear Duo are worn behind the ear to make the earbuds more stable. When wearing, you need to slide into the guessing mold from under the ear, stuck in the ear canal, it is difficult to succeed at one time when you wear it for the first time, and it will be much smoother after practicing the code after many times, and it takes a habit process. In terms of firmness, with the U-shaped bracket, it can completely ensure that it will not fall off in daily use.

The steps to connect your Sony headphones with your phone's Bluetooth are as follows:

1. Enter the "Settings - >Bluetooth" interface, turn on the Bluetooth function of the mobile phone2, and confirm that the Bluetooth has been turned on.

3. Under normal circumstances, when the Bluetooth headset enters the pairing state, you only need to keep holding the power button for about 10 seconds and don't let go, and the headset will change from off to on and then to pairing, which is manifested as the headset indicator (always on).

First, the general use of the method:

Turn on the Bluetooth headset first (press and hold the power button for about seven seconds) to enter the pairing state, and the indicator light of the headset will be on at this time. Then use your phone to search for Bluetooth settings, you can find your headphones, and pair and connect.

Second, some factory settings are more complicated earphones, take Sony Ericsson's HBH-602 HBH608 HBH610A as an example: (When matching the code, you must turn on the earphones first, and then press and hold the +, - number for about 10 seconds at the same time, then the indicator light will flash red and green alternately, so that you can use your mobile phone to search for Bluetooth devices.) ）

Here's how to use it:

2. Then select the Bluetooth headset device you found on your phone, and then you will receive a prompt from your phone that you need to enter a password. (The vast majority of earphone passwords are 0000 or 1234, but there are some that are specially set by the manufacturer, and there will be a detailed record in your earphone manual.) ）

3. After entering the password correctly, you can start using it.

Note: Now many mobile phones need to connect with the headset after finding the Bluetooth device, if your phone is not connected to the headset in the settings, it is not possible to answer** and other operations.

It doesn't block the ear canal when worn, so you can hear both ** and the surrounding environment at the same time. But you don't have to worry about headphone volume, as when you turn on Adaptive Sound Control and Dynamic EQ with the Xperia Ear Duo app, the headphones automatically adjust the volume based on your surroundings and increase the volume of lower audio sources to continuously optimize your listening experience. The Sony True Wireless Bluetooth Headphones Ear Duo offer a new listening experience while keeping you connected to the world around you.

You can feel the changes in your surroundings while enjoying and playing.

The connection method is:

1. Turn on the on/off key of the Lanhuai Zeya earphone, and press and hold the on/off key until the indicator flashes red and blue lights alternately, and enters the pairing state

3. After finding it, select the pairing connection, if prompted to enter the password, enter the pairing password in the mobile phone: 0000 (some pairing passwords are: 1234) Hui suspicion, and the connection is successful, then the pairing is completed;

1. Press and hold the power button of the Bluetooth headset for about 7 seconds.

2. When the red and blue indicators flash, release the power button.

3. Turn on your smartphone"Bluetooth"function, click on the corresponding Bluetooth headset model name to connect.

4. After the connection is completed, the smartphone has been successfully paired with the Bluetooth headset.

Answer: Turn on the Bluetooth speaker. The Bluetooth speaker of the speaker only needs to turn on the power switch of the speaker (other Bluetooth speakers need to broadcast the switch to the direction marked with the Bluetooth icon, until you hear two "beeps" or a voice prompt that the Bluetooth speaker has been turned on), and then the Bluetooth indicator light flashes, indicating that the Bluetooth has been turned on and has entered the searchable mode.

Bluetooth connection. At this time, it will be prompted to enter the password,The Bluetooth speaker password of the speaker is:0000,After the password is entered, it will be automatically connected to the audio,At the same time, the Bluetooth speaker will "beep".

It may be that the Bluetooth headset and the phone are not paired.

The method of connection is:

1. Turn on the on/off key of the Bluetooth headset and press and hold the on/off key until the indicator flashes red and blue lights alternately

3. After finding it, select the pairing connection, enter the pairing password: 0000 on the mobile phone, and complete the pairing if the connection is successful.

Bluetooth headset: Bluetooth headset is a small device based on Bluetooth technology, Bluetooth headset is to apply Bluetooth technology to hands-free headphones, so that users can avoid the stumbling of annoying wires, and talk easily in various ways. Bluetooth headsets not only liberate people's hands, but also avoid the pain of hands and necks caused by long-term handheld calls, and can also effectively reduce the harm of electromagnetic waves to the human body. Since the advent of Bluetooth headsets, Bluetooth headsets have been a good tool for mobile business people to improve efficiency.

It should be that the Bluetooth of the mobile phone and the headset has not established a pairing connection relationship, and the method is:

1. Turn on the on/off key of the Bluetooth headset, press and hold the on/off key until the indicator flashes red and blue lights alternately, and enter the pairing state;

3. After finding it, select the pairing connection, enter the pairing password: 0000 in the mobile phone, and complete the pairing if the connection is successful;

Some pairing passwords are: 1234).