Motorola A1210 mobile phone into the browser how to appear network failure

The reasons why your phone's browser can't access the internet are as follows:

First: Whether the mobile phone data traffic switch is turned on, and whether the mobile phone is in arrears.

There may be arrears, or it is caused by unsuccessful links for many times, and it is restarted.

Then there is the setting problem, you can consult the mobile operator and ask them how to set it.

First of all, check if you have data activated**.

Check to see if your phone has data turned on.

Sometimes it's not that you don't have an internet connection, it's that the network signal in your place is poor, and it takes too long to load the web page, so it will also indicate that there is a network failure.

Sometimes it is. My experience is that when you open the browser, you should leave it alone and let him open Monternet first, and then go to the ** you want to go on. If you always have network failures, you can call ** to 10086, ask the customer service staff to reset your GPRS data in the background, shut down the phone for about 15 minutes and then turn it on, then it should be fine.

I also use 1210, and this failure often occurs, and this problem always occurs when I use 1200 in the past, sometimes because it has just been turned on, and the machine has not yet reacted, and there is when the signal is not good, but there is no big problem, just restart it.

If the touch screen of a typical touchscreen mobile phone fails, there are only two possibilities:

1.The touchscreen panel is damaged, and if this happens, the only way to do this is to replace it with a new one, and there is nothing else to do.

2.Phone software issues, which can be caused by software conflicts or bugs inside the phone. If you encounter this situation, you can directly flash the computer to solve the problem. However, if you want to flash the phone, the phone must be a smartphone.

There is a problem with the touch screen, and the touch screen is also a separate screen.

I use a Motorola ME525 If the general touch screen fails, brother, let's go and take a look at the after-sales service.

Are you plugging in a Unicom card or a mobile one? Only mobile cards can be on the mobile phone Feixin!

Hello, the reasons for not being able to log in to the Feixin mobile client normally are mostly due to the status of the mobile phone number itself, access point settings, etc., and these problems can be confirmed through simple troubleshooting. If you are unable to log in properly, perform the following steps:

1. Please confirm whether your mobile phone number and the status of Fetion are normal, that is, the mobile phone is not down, and Fetion has been activated.

3. Please verify whether your mobile phone is the compatible model announced on the official website of Feixin, whether the client that matches your mobile phone model is installed, whether the mobile phone has been upgraded, flashed and other operations, and whether the mobile phone is a parallel import. Because most of the Fetion mobile clients are precisely adapted to the mobile phone model, if the above situation exists, there may be a problem of not being able to log in normally.

4. Under normal circumstances, after the login fails, there will be an error** or prompt. If you see an error code of 1&403, FFFF&000, etc., then you may have encountered a temporary network error, or your mobile phone's network access point is set incorrectly, please set the network access point to CMWAP and log in (Note: Some mobile phones support CMNET or WiFi access point login).

Due to the large number of mobile phone models, limited by space, the network access point setting method of each mobile phone is not provided here, please consult the customer service of the mobile phone manufacturer.

5. If you can't successfully log in to the Fetion mobile client through the above methods, please go to the "Fetion Q&A I want to ask questions" in the official customer service center of Fetion for feedback, and feedback the problem to the customer service staff, we will help you troubleshoot as soon as possible, and feedback the results to you. When you report a problem, you may be asked to provide the following information:

a) Error** or error message after login failure.

b) The time when the problem occurred.

d) Screenshot of the problem.

Please refer to it, thank you.

Go to the IT168 Motorola forum and ask.