What should I do if the Xiaomi fitness bracelet is not obvious?

Circumstance. 1. There is no electricity.

The Mi Band can be used for almost a month on a single charge. Due to the long standby time, I don't usually pay much attention to its battery usage. However, before the battery of the bracelet is almost exhausted, the indicator will show red and vibrate to remind us.

If the bracelet is about to run out of battery and reminds us, if we don't notice it, it may appear that no matter what we do, its indicator light will not light up. If it is a case where the bracelet is out of power, please charge the Mi Band.

Circumstance. 2. Gesture swinging.

The mobile phone applications and firmware of the Xiaomi Mi Band are not constantly updated and upgraded, and each upgrade will optimize the software and firmware to solve some problems in use. If you encounter that the indicator light of the bracelet does not light up, please check whether there is an updated firmware currently.

In addition, the Mi Band mobile phone app, there is a Find Bracelet function, when we use this function, the bracelet will not only vibrate, but the indicator will also flash.

Circumstance. Fourth, hardware failure.

If all the above situations do not belong to the situation you are currently experiencing, it is possible that the hardware of the Xiaomi Mi Band has a functional failure at this time. If you have hardware problems, please contact Xiaomi's official after-sales service to communicate about after-sales guarantee services.

After a long time, it can be broken, or there is no power.

The Mi Band has a weight when it is turned on, which is the default of the system and can be modified.

The main functions of the Mi Band include checking the amount of exercise, monitoring sleep quality, waking up the smart alarm clock, etc. You can check the amount of exercise in real time, monitor the effect of walking and running, and identify more sports items through the cloud.

The Mi Band can automatically determine whether to enter a sleep state, record deep sleep and light sleep separately, and summarize sleep time to help users monitor their sleep quality.

The Mi Band is equipped with a Bluetooth Low Energy chip and an acceleration sensor, and it can be on standby for up to 30 days. In addition, it supports IP67 water and dust resistance, which means that you don't need to take it off even when you take a shower.

The hardware of the Mi Band means that the built-in Mi Band is a three-axis acceleration sensor ADXL362, through which the three-axis acceleration sensor bracelet can capture the acceleration changes in use of the bracelet, so as to generate data.

In addition,The software algorithm of the Xiaomi Mi Band is the data of the three dimensions captured by Huami programmers in real time according to the three-axis acceleration,Through the process of filtering waves、Peak and valley detection, etc.,Use various algorithms and scientific and meticulous logical operations,Finally, these data will be converted into readable numbers on the bracelet APP,Steps、Distance、Calories consumed are presented in front of the end user。

Summary. 2.In the case of more peripheral bracelets, you can bring your bracelet close to the mobile phone, or go to a place where there are fewer Bluetooth devices.

3.If the Mi Band has been bound before, you need to unbind it from the previous device before binding the new phone.

In the case of more peripheral bracelets, you can bring your bracelet close to the mobile phone, or go to a place where there are fewer Bluetooth devices. 3.If the Mi Band has been bound before, you need to unbind it from the previous device before binding the new phone.

Hello dear <>

Mi Health is a mobile phone app that needs to be connected to the Mi Band. If you have purchased a Mi Band and want to find a Mi Band in Mi Health, please follow these steps:1

First of all, connect the Mi Band and your phone to Bluetooth. Make sure your phone's Bluetooth is turned on, select "Add device" in Mi Health, and follow the prompts to complete the pairing of the band. 2.

If the bracelet has been successfully connected to the mobile phone, click on the "My" page in Xiaomi Health and select "Bracelet" to view the sports data of the bracelet, set the alarm clock and other functions. 3.If the bracelet has not been successfully connected to the phone, you can try to pair it again, or select "Find Device" in Mi Health to let the bracelet vibrate prompt to make it easier to find.

It should be noted that different models of Xiaomi Mi Bands may be different, and you can refer to the corresponding instructions for specific operation steps.

Hello, I am happy to serve you and give you the following answers: There are many reasons why this happens, mainly the following: First, the disappearance of the Mi Band movement may be due to the device not being properly connected to the mobile phone.

1.First of all, make sure that both your Mi Band and your phone's Bluetooth are turned on; 2.Then, please find "Device Management" in the Mi Sports app, click "My Device", click "Add New Device", click "Mi Band", select your device, click "OK", and the connection of the device can be completed; 3.

Finally, make sure that the distance between your Mi Band and your phone is not too far to guarantee the normal transmission of Bluetooth signals. Second, the disappearance of the Mi Band movement may be due to the device not updating the software. 1.

First of all, make sure that both your Mi Band and your phone's Bluetooth are turned on; 2.Then, please find "Device Management" in the Mi Sports app, click "My Device", click "Device Settings", click "Software Update", and click "Update Now" to complete the software update; 3.Finally, make sure that the distance between your Mi Band and your phone is not too far to guarantee the normal transmission of Bluetooth signals.

1.The first step is to turn on Mi Sports.

Allow Bluetooth permissions, turn on the Bluetooth of the mobile phone, and connect the bracelet to the mobile phone.

2.Step 2: Click My at the bottom right to open your personal settings.

3.Step 3: Tap on the Mi Band.

Open the mobile phone control terminal of the bracelet.

4.Step 4, on this page, first scroll down, find the bracelet display settings option below, and click Open.

5.Finally, on the right side we can choose what appears on the bracelet, click on it to select. When we look at it in the bracelet, we can see what we have chosen. Business Links.

The above information is for reference only, Tianyi cares for home, seven-day monitoring ** review, check at any time, feel at ease at home, details can be viewed in Guangxi Telecom's online business hall. Customer service number 343 will answer for you.

OK. You need to authorize the bracelet on your mobile phone to use Xiao Ai first. And then that's it.

The steps to authorize use are as follows:

1. First enter the Mi Sports, click on Mine, and select the Mi Band 5 device to enter.

2. Then swipe up and click on Xiao Ai's options, which one is already entered, and click the option to authorize below.

3. After clicking, you can successfully authorize, and at the same time, you can see the skills of Xiaoai on the landing code on the bracelet.

4. On the interface of the bracelet, swipe to the right side of the Min side, you can successfully enter Xiao Ai and use the relevant functions.