The bridged secondary router notebook can access the Internet, but the mobile phone can t be connect

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

What are the main settings for bridging with second-level routing?

There is no need to connect a network cable, and wireless bridging does not need to connect two routers with a network cable.

When you want to use a wireless router to access the Internet, but you don't want to use a network cable or it is inconvenient to use a network cable, you can use a wireless bridge to achieve wireless Internet access

1. Prepare two wireless routers A and B, if Route A is connected to the cat and can already surf the Internet normally, then take it as the main device, and Router B should be placed in another room, but it is too troublesome to pull a network cable to connect Route A, you can use Route B to bridge Route A, and I use Route B as a secondary route.

2. The IP addresses of the two routers should be in the same network segment, if route A is, then route B is set to.

3. Set the channels (frequency bands) of the two routes to the same, preferably 6 or 9

4. The main router does not need to enable the WDS (i.e. bridge) bridging function, the secondary router needs to be enabled, and click Scan to fill in the key type and key of the main router.

5. DHCP should be enabled for the primary route, and DHCP should be turned off for the secondary route.

6. Finally, restart the route.

After the WDS wireless bridging is set, the bridging status on the management interface of the login sub-router shows that the bridging is successful, but neither the computer is wired nor wirelessly connected to the sub-router can access the Internet. So do you know what to do if the computer can't access the Internet after the wireless router is bridged? Here are some relevant information I have compiled about the computer not being able to access the Internet after the wireless router is bridged for your reference.

The solution to the computer can't access the Internet after the wireless router is bridged:

1. Confirm that the IP address of the LAN port is different from that of the main router.

The IP address of the LAN port of the secondary router must be different from that of the primary router, otherwise the terminals on the network may not be able to access the Internet due to address conflicts.

For example, the IP address of the primary router and the IP address of the secondary router are changed. If the primary router is set to, the IP address of the secondary router is changed to .

2. Confirm that the DHCP server is shut down.

Be sure to turn off the DHCP server of the secondary router, otherwise the terminal may obtain an IP address from the secondary router and may not be able to access the Internet. Make sure that only one DHCP server is kept in the network. Find the DHCP server on the management page and click Close.

If the primary router is equipped with data access management functions such as filtering or binding, the terminals connected to the secondary router are not on this list, and the terminals cannot access the Internet. As shown in the figure below, if the Internet access control list does not contain terminals, you may not be able to access the Internet.

It is recommended to turn off the Internet access control, parental control, and ARP binding (IP and MAC address binding) set on the main router, and then try to surf the Internet again.

Note: Many users are unable to access the Internet after bridging due to unreasonable settings of the above functions, please be sure to troubleshoot.

Loops can cause broadcast storms, which can affect your computer's ability to access the Internet.

During the WDS process, please note that:

1. After using WDS bridging, the network cable can no longer be connected between the main and secondary routers. The correct bridging is shown below:

2. If the main and secondary routers are dual-band routers, they can only be bridged with a certain frequency band of 5G, and do not enable WDS for both frequency bands at the same time. As shown below:

If the problem cannot be solved through the above troubleshooting, it may be caused by the compatibility of the router's wireless communication mechanism. You can try to use the main router to connect the WDS wireless router to the secondary router (the roles of the primary and secondary router are reversed) to test whether it can be used normally.

Note: The cloud router cannot enable WDS bridging when it is the primary router.

If all terminals connected to the secondary router cannot access the Internet, record the product model and hardware version of the primary and secondary routers, and call the router manufacturer for technical support.

1.What should I do if the secondary router cannot access the Internet after bridging.

2.What should I do if I can't access the Internet after the wireless router is bridged.

3.What to do if you can't access the Internet after the wireless router is bridged.

4.What should I do if the TP router cannot be connected to the Internet after wireless bridging?

5.What to do if the router wireless bridge can't go online.

All connected to the wireless router under the same wireless bridge, the computer can access the Internet, but the mobile phone cannot. Then you know wireless router bridgingThe solution to the phone can't access the Internet after the wireless router is bridgedWhether DHCP is enabled on the router and whether the signal of the router is stable is generally 25db or more.

Check whether route B is successfully bridged. Then connect the mobile phone to the wifi signal of the B router to see if there is a network, and enter the IP address of the B router in the view of the mobile phone.

Whether to go to the router settings interface, and then use the computer to connect to the wifi of the B router to see if there is a network Open the web page, if the computer has a network, but the mobile phone sometimes has a time to wait for the network, then look at the router's LAN port settings Whether it is the same as the LAN port setting of a router, (check that when you successfully bridge a router and directly enter the general router is this IP address, you will find that you enter a router and have a password to modify but still don't go to the router i of the house.) That's how I lost my reputation for the nearest wifi).

In the above steps, it is the easiest way to check the LAN port address, if you enter your router address and go into the router address of A, it means that your LAN port address is in conflict, why does the computer not affect I don't know It may be a problem with the mobile phone, the mobile phone vivoy13 is not affected My MX3 is affected, I am speechless, please see the figure, the last digit should be changed casually, as long as it is not duplicated with the LAN port address of the A router.

1.What should I do if the secondary router cannot access the Internet after bridging.

2.What to do if you can't access the Internet after the wireless router is bridged.

3.Router wireless bridging.

What to do if you can't get online.

4.What should I do if the TP router cannot be connected to the Internet after wireless bridging?

After setting up wireless bridging, the secondary router notebook is connected to no network, and the mobile phone is connected to the network.

After setting up wireless bridging, the secondary router notebook is connected to no network, and the mobile phone is connected to the network pro, hello, check the settings of the secondary router. Shut down the DHCP server.

If DHCP is enabled on the secondary router, the computer may obtain the wrong gateway address and cannot access the Internet, so you need to shut down the DHCP server of the secondary router. Setup method: Log in to the management interface of the secondary router, click DHCP Server >> DHCP service, select DHCP server as Inactive, and click Save.

Modify the IP address of the LAN port. If the management IP address of the main and secondary router is the same (take the book as an example), it will cause an IP address conflict, resulting in the computer being unable to access the Internet, so Yu Pai needs to modify the management IP address of the secondary router, I hope my answer will be helpful to you, <>

In the network interconnection equipment, the router is the most widely used network interconnection equipment, is an important interconnection equipment for data communication, but it is inevitable to encounter some problems in use, such as the mobile phone can be connected to the Internet computer but not work, how to solve this situation? Let me share the solution with you, welcome everyone to read and learn.

Set up a wireless router.

Log in to your wireless router and find "Wireless" – Channels, and you will find that there are 1 to 13 channels to choose from.

It is recommended that the channel be set to 11. OK, just restart your router. (For more detailed steps, please see another experience of mine - laptop wifi often drops, local connection is limited to solve the solution).

Configure the computer network card.

Go to the network connection control panel, select Wireless, right-click, and click "Properties".

The properties page pops up, as shown below, and click "Configure".

Set "preamble" to the blending mode.

AP Compatibility Mode is selected as "Wider Compatibility".

The IBSS mode is set to Automatic

Select "11" for the WZC IBSS channel number

The above steps can improve compatibility, but if you are not sure that you can solve the problem, if you can't adjust the router, you can try.

If you want to restore the initial settings of the NIC configuration, you can use the 360 Disconnected First Aid Kit to restore it, or reinstall the driver.

2.The solution to the mobile phone can connect to wifi but the computer cannot access the Internet.

3.What should I do if my phone is connected to the router wifi and can't access the Internet.

4.What should I do if the same wifi mobile phone can access the Internet and the computer can't.

5.Connect to the same wifi mobile phone can access the Internet but the computer can not access the InternetSolution to the solution.